2001 GM Truck BCM Body Control Module 09375899

Restore Your Truck’s Electrical System

Get your GM truck back on the road fast with our VIN-programmed Body Control Module. This BCM arrives ready for installation, solving common electrical problems like faulty lights and power accessories. No core charge required. Provide your VIN at checkout for a simple, effective solution.

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



Guaranteed Safe Checkout

Is Your 2001 GM Truck or SUV Plagued by Electrical Gremlins?

If you’re dealing with flickering lights, malfunctioning power windows, or a security system that has a mind of its own, a failing Body Control Module (BCM) is the likely culprit. The BCM is the central command center for your vehicle’s body electronics, and when it starts to fail, it can cause a wide range of frustrating and unpredictable issues. This can make your reliable truck feel untrustworthy. Don’t let a faulty module keep you off the road. Our pre-programmed BCM is the definitive solution to restore your vehicle’s functionality and your peace of mind.

From the Diagnostic Bay

We recently had a 2001 Silverado 2500 in the shop. The owner was at his wit’s end. The horn would honk randomly, the dome light would stay on, and sometimes the truck just wouldn’t start, showing the dreaded ‘Security’ light. After confirming power and grounds were good, we pinpointed the BCM. Instead of a costly tow to the dealer and waiting for them to program a new module, we installed one of our VIN-programmed units. The installation was simple, and the truck fired right up with no more electrical ghosts. The customer was back on the job site the same afternoon.

Common Symptoms of a Failing BCM

  • ✔ Erratic or non-functional interior and exterior lights (headlights, taillights, dome lights).
  • ✔ Power windows, door locks, or mirrors working intermittently or not at all.
  • ✔ The vehicle’s security system engaging randomly, causing a no-start condition.
  • ✔ False warnings on the instrument cluster, such as a ‘Door Ajar’ light that stays on.
  • ✔ The radio or climate control system behaving erratically.
  • ✔ Inconsistent or non-working windshield wipers.

Why Choose Our 2001 GM Truck BCM?

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the guesswork and hassle out of the repair. When you order from us, we flash the module with the latest GM-certified software specifically for your vehicle’s VIN. This ensures perfect compatibility and function right out of the box, saving you from expensive dealership programming fees and diagnostic time. This module is a direct replacement for part numbers 09375899, 9392990, 09370249, and 19180223, covering a wide range of GM trucks and SUVs.

Installation and Required Procedures

Physically replacing the BCM, located under the driver’s side dash, is straightforward for a DIYer with basic tools. However, because this module communicates with other critical systems, some post-installation steps may be necessary:

  • Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
  • Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be required to ensure your brake lights and traction control system function correctly.

Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.

Frequently Asked Questions

How do I provide my VIN for programming?

After you complete your purchase, you will receive instructions on how to send us your vehicle’s 17-digit VIN. We cannot ship your part until we receive this information.

Is this part truly ‘plug and play’?

For most vehicles, yes. Because we pre-program it to your VIN, it will control the basic functions immediately. However, as noted, certain systems like the airbag or brake sensor may require a simple relearn procedure with a diagnostic tool.

Do I need to return my old BCM?

No. This purchase has no core charge. You can keep your original module.

Will this fix the ‘Security’ light on my dash?

A failing BCM is one of the most common causes of a persistent ‘Security’ light and no-start issues on these GM trucks. Our VIN-programmed module correctly syncs with your vehicle’s anti-theft system, resolving this issue in the vast majority of cases.

My original part number is 9392990. Will this work?

Yes. This BCM, part number 09375899, is a fully compatible, direct replacement for part numbers 9392990, 09370249, and 19180223.

MPN

09375899

Year

Genuine OEM

Yes

Condition

Refurbished

Model

Silverado 3500 Pickup

Make

Year

2001

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , , ,

GTIN

Does not apply

Interchange part number

Scroll to Top