2000 Silverado Body Control Module Programmed To Your Vin Part No 19208539 BCM

Restore Your Truck’s Electronics Instantly.

Experiencing strange electrical issues? Our pre-programmed Body Control Module is the direct-fit solution. We flash it to your vehicle’s VIN with the latest GM software, so it’s ready for installation right out of the box. No dealer visit required. Order today and get your truck back to normal!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 591-06529-33 Categories: ,
Guaranteed Safe Checkout

Restore Full Electrical Function to Your GM Truck or SUV

Are you battling frustrating and unpredictable electrical problems in your vehicle? Issues like flickering lights, malfunctioning power windows, a dead instrument cluster, or a security system that prevents your truck from starting are common signs of a failing Body Control Module (BCM). The BCM acts as the central command center for your vehicle’s body electronics, and when it malfunctions, it can create a cascade of confusing symptoms. This replacement module is the definitive solution to restore your vehicle’s electronic stability and performance.

From the Diagnostic Bay

We had a 2000 Silverado 1500 towed in that was driving its owner crazy. The radio would turn on and off by itself, the dome lights would flicker while driving, and occasionally the horn would honk when he used the turn signal. He had already replaced the battery and checked all the grounds he could find. After connecting our diagnostic scanner, we saw multiple communication loss codes with the BCM. Instead of a complex wiring issue, the root cause was the central module itself. Installing a VIN-programmed 2000 Yukon Body Control Module like this one resolved every single electrical gremlin. It’s often the simple, central component causing the most complex-seeming problems.

Common Symptoms of a Failing BCM

  • ✔ Erratic power windows, mirrors, or door locks that work intermittently.
  • ✔ Interior or exterior lights (headlights, dome lights) staying on or not turning on at all.
  • ✔ The anti-theft or security system light is illuminated, often causing a no-start condition.
  • ✔ Instrument panel gauges behaving erratically or not working.
  • ✔ The horn sounding randomly or not functioning when pressed.
  • ✔ HVAC (heater and A/C) controls are unresponsive.
  • ✔ Stored diagnostic trouble codes (DTCs) related to lost communication (U-codes).

The Plug-and-Play Solution for Your 2000 Yukon Body Control Module

Don’t waste time and money at a dealership on diagnostics and programming fees. We provide a straightforward, reliable solution. This Body Control Module is meticulously tested and prepared for your specific vehicle. When you place your order, simply provide us with your vehicle’s VIN. Our technicians will then program the module with the latest, most stable software updates directly from GM, ensuring it matches your truck’s exact configuration and options. This critical step means the module is ready for installation the moment it arrives at your door.

Installation and Post-Install Requirements

The BCM is typically located on the driver’s side, under the dashboard. While installation is a direct swap, some vehicles may require simple post-installation relearn procedures to ensure all systems communicate correctly. These can often be done with a high-end diagnostic scan tool.

  • Airbag System Sync: If the airbag warning light is on after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the new BCM with the airbag system.
  • Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure proper brake light and traction control functionality.

Best of all, there is no core charge for this part. You can keep your original module without the hassle of shipping it back.

Guaranteed Compatibility

This module is a direct replacement for service numbers 09385236, 19208539, and 9371990. It fits a wide range of GM trucks and SUVs, including the Chevrolet Silverado, Tahoe, Suburban, S10, Blazer, Astro, and the GMC Sierra, Yukon, Jimmy, and Safari. Please verify the part number on your original module or consult the fitment list to ensure this is the correct 2000 Yukon Body Control Module for your application.

Frequently Asked Questions

What does the Body Control Module (BCM) do?

The BCM is a computer that controls and monitors most of your vehicle’s non-engine-related electronic functions. This includes power windows, door locks, interior and exterior lighting, the security system, wipers, and the instrument cluster.

Why is my vehicle’s VIN required for this part?

Programming the BCM with your VIN is essential. It loads the correct software and settings for your vehicle’s specific options (like power seats, keyless entry, etc.), ensuring all features work correctly after installation. This service saves you a trip to the dealership.

Is this part difficult to install?

For someone with basic mechanical skills, the physical replacement is straightforward. It typically involves removing a few dash panels to access the module and swapping the electrical connectors. The most critical part is ensuring any necessary post-install relearn procedures are performed.

What happens if the post-installation procedures are not done?

If a required procedure is skipped, you may have lingering issues. For example, not syncing the airbag system could leave the warning light on. Not performing the brake pedal relearn could affect brake light or traction control operation.

Will this fix my ‘Security’ light and no-start problem?

A faulty BCM is a very common cause of security system issues in these GM vehicles. This VIN-programmed module correctly syncs with your vehicle’s anti-theft system, resolving these problems in most cases.

Do I need to send my old BCM back?

No. This part is sold with no core charge. You can keep your original module, which saves you time and the cost of return shipping.

Conditions & Options

Programmed to your VIN GM: 09371990

Year

Genuine OEM

Yes

Interchange part number

Condition

Seller refurbished

Model

YUKON

Make

Year

2000

Brand

CHEVROLET TRUCK

MPN

09385236

Manufacturer Part Number

, , , ,

Scroll to Top