1998 ISUZU Hombre Engine Control Module 09366810 Programmed To Your VIN VIN PCM ECM

One-year replacement warranty

*See fitment in the description for exact vehicle fitment*

$115.00

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-06234B-36 Categories: ,
Guaranteed Safe Checkout

1998 ISUZU HOMBRE Powertrain Control Module (PCM) 09366810 – Programmed to Your VIN

Imagine your 1998 Isuzu Hombre suddenly hesitating during acceleration on a busy highway, or the check engine light flashing with erratic idling that leaves you stranded. These frustrating symptoms often stem from a faulty powertrain control module, disrupting fuel delivery and ignition timing. If you’re searching for “how to fix PCM issues on 1998 Isuzu Hombre,” this pre-programmed replacement is your reliable solution. It arrives flashed with the latest GM updates tailored to your VIN, ensuring seamless integration. Compatible with part numbers like 16250279, 09366810, 09355699, it fits various GM models from 1998-1999, including select Chevrolet, GMC, and Isuzu vehicles with matching IDs. This setup restores smooth performance, clears persistent codes, and boosts overall drivability without the hassle of dealership visits.

Key Features & Benefits

  • Delivers precise engine management by optimizing fuel mixture and spark timing for better efficiency on long drives.
  • Includes VIN-specific programming that matches your exact vehicle specs, preventing compatibility headaches.
  • Supports gasoline engines in models like the 4.3L V6, enhancing throttle response and reducing emissions.
  • Offers quick recovery from module failures, helping you avoid towing costs in remote areas.
  • Comes with expert-backed updates from GM, ensuring reliability for daily commutes or heavy loads.
  • Simplifies troubleshooting by addressing common electronic glitches, saving time on diagnostics.

Common Issues & How This Fixes Them

Owners of the 1998 Isuzu Hombre often face PCM-related problems that mimic other engine woes. For instance, a failing module might trigger rough idling or stalling, caused by corrupted software or water intrusion in the engine bay. This leads to diagnostic trouble codes like P0300 for random misfires or P0120 for throttle position sensor faults, making your truck unreliable for errands or work. Another frequent issue is poor fuel economy, where the PCM fails to adjust air-fuel ratios properly, resulting in higher gas bills and sluggish performance. Heat from the engine compartment can also degrade internal components, causing no-start conditions especially after hot soaks.

This programmed PCM resolves these by providing fresh, updated firmware that recalibrates sensors and actuators. In real scenarios, like when your Hombre won’t accelerate smoothly uphill, installing this module restores proper signal processing, eliminating hesitation. Expert tip: Always scan for codes first using an OBD-II tool to confirm PCM involvementโ€”I’ve seen many cases where a simple battery disconnect masked the real culprit. For vehicles exposed to moisture, apply dielectric grease on connectors during install to prevent future corrosion. By fixing these root causes, you regain confident driving, whether navigating city streets or off-road paths.

Easy Installation Guide

  1. Provide your VIN after purchase so we can program the PCM with the latest GM updates for your specific vehicle.
  2. Disconnect the battery to ensure safety and reset any stored codes before starting the swap.
  3. Locate the PCM in the engine compartment (typically right-hand front for your model) and remove the mounting bolts carefully.
  4. Unplug the old module’s connectors, install the new one, and secure it in placeโ€”double-check for firm connections to avoid signal issues.
  5. Reconnect the battery and perform a CASE relearn if needed: Drive at varying speeds for 10-15 minutes to allow the system to adapt crankshaft position data.
  6. If the vehicle doesn’t start post-install due to security protocols, conduct a theft deterrent relearnโ€”insert key, turn to ON for 10 minutes, off for 30 seconds, repeat three times; our programming minimizes this need.

Fitment Details

Compatible with:

1998 ISUZU HOMBRE

Verify part numbers; provide VIN for confirmation.

Don’t let PCM failures sideline your 1998 Isuzu Hombre any longerโ€”grab this VIN-programmed module today to restore peak performance and peace of mind. With easy setup and proven fixes for common glitches, it’s the smart choice for lasting reliability. Order now and get back on the road confidently!

Condition

Refurbished

MPN

09366810

Genuine OEM

Yes

Interchange part number

PartNumber

590

Model

isuzu-hombre

Year

1998

Brand

GM

Manufacturer Part Number

, ,

Scroll to Top