1998-1999 Grand Am PCM 09356741 | VIN Programmed

Restore Your Grand Am’s Performance!

Fix stalling, poor idling, and harsh shifting with this Powertrain Control Module. It arrives pre-programmed to your car’s VIN with the latest GM software, making installation a breeze. No dealer visit required. Get your VIN-programmed PCM and fix your car today!

$64.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-05069-9 Categories: ,
Guaranteed Safe Checkout

Is Your Grand Am Experiencing Frustrating Engine Problems?

As a mechanic with over two decades of experience, I’ve seen countless late-90s GM vehicles, like your Pontiac Grand Am, come into the shop with baffling issues. You might be dealing with a persistent check engine light, sudden stalling at intersections, rough idling, or transmission shifts that are harsh and unpredictable. These aren’t just annoyances; they’re signs that the brain of your vehicle—the Powertrain Control Module (PCM)—is failing. When the PCM falters, it can make your reliable car feel untrustworthy.

This isn’t a part you can just grab off a shelf. A replacement PCM must be programmed specifically for your car’s Vehicle Identification Number (VIN) to work correctly. That’s where we come in. We take the guesswork and dealership hassle out of the equation.

The Direct Solution: A PCM Programmed for Your Exact Vehicle

This Powertrain Control Module (part #09356741) is the definitive solution for your 1998-1999 Grand Am PCM issues. Before we ship it, our technicians will flash it with the latest official GM software updates, precisely matched to your car’s VIN. This ensures that once installed, it communicates flawlessly with your engine, transmission, and all other onboard systems, restoring the performance and reliability you expect.

  • ✔ Eliminate Guesswork: Solves common issues like stalling, no-start conditions, poor fuel economy, and erratic shifting.
  • ✔ Save Time and Money: Arrives pre-programmed and ready for installation. No expensive trip to the dealer for programming is required.
  • ✔ Latest Software: We load the most current GM calibration for your vehicle, often improving on the original factory software.
  • ✔ Guaranteed Compatibility: By using your VIN, we ensure a perfect electronic match for your vehicle’s specific options.

From the Shop Floor: A Real-World Diagnosis

“A customer’s ’99 Grand Am with the 3.4L V6 came in last week with these exact symptoms. It would die at stoplights intermittently, and the transmission would sometimes refuse to shift out of first gear. The owner had already replaced the spark plugs and fuel filter with no luck. My professional scan tool showed multiple communication loss codes with the PCM. After confirming the wiring harness was intact, we knew the module itself was the culprit. We installed a VIN-programmed PCM just like this one, and the car was running perfectly within the hour. It’s a common failure point on these cars, but thankfully, it’s a straightforward fix with the right part.”

Simple Plug-and-Play Installation

You don’t need to be a master mechanic to replace your PCM. With our pre-programmed module, the process is designed to be simple. Just locate your old module, swap it with the new one, and you’re ready to go.

  1. Safety First: Disconnect the negative terminal from your car’s battery to prevent any electrical shorts.
  2. Locate the PCM: On most 1999 Grand Am models, the PCM is found behind a panel in the center of the dashboard, accessible from the driver’s side footwell. On some 1998 models and other compatible vehicles, it may be in the engine compartment. A quick search for your specific model will confirm the location.
  3. Disconnect and Remove: Carefully unplug the electrical connectors. They have locking tabs that need to be released. Once disconnected, unbolt the old module from its mounting bracket.
  4. Install the New Module: Bolt the new PCM into place and securely reconnect the electrical harnesses. You’ll hear a ‘click’ when they are properly seated.
  5. Reconnect Battery: Reattach the negative battery terminal. The vehicle may need to run for a few minutes to complete its internal relearn procedures.

Guaranteed Fitment for Your GM Vehicle

This module is a direct replacement for several service numbers, ensuring wide compatibility. Please verify your original part number or contact us with your VIN if you are unsure. This module replaces the following part numbers: 09356741, 16236757, 9357034, 9357440, 9366314.

This 1998-1999 Grand Am PCM is also the correct computer for the following vehicles:

  • Alero: 1999 (3.4L, check ID)
  • Achieva: 1998 (3.1L)
  • Bonneville: 1998
  • Camaro: 1998 (3.8L)
  • Century: 1998 (3.1L)
  • Cutlass: 1998-1999 (check ID for ’99)
  • Eighty Eight: 1998
  • Firebird: 1998 (3.8L)
  • Grand Am: 1998 (3.1L), 1999 (3.4L, check ID)
  • Grand Prix: 1998
  • Intrigue: 1998
  • LeSabre: 1998 (3.8L)
  • Lumina Car: 1998
  • Malibu: 1998 (3.1L)
  • Monte Carlo: 1998
  • Park Avenue: 1998 (3.8L)
  • Regal: 1998
  • Riviera: 1998 (3.8L)
  • Silhouette: 1998
  • Skylark: 1998 (3.1L)
  • Trans Sport: 1998
  • Venture: 1998 (3.4L)
Condition

Refurbished

Genuine OEM

Yes

MPN

09356741

Interchange part number

PartNumber

590

Model

GRAND AM

Year

1999

Brand

GM

Manufacturer Part Number

, , , , , ,

superseded part number

09356741 16236757 16236757 9356741 9357034 9357440, 9366314

Scroll to Top