1998-1999 Astro PCM 09366810 | Programmed to Your VIN for a Perfect Match

Restore Your Engine’s Performance!

Get your GM truck or van running smoothly again with our VIN-programmed Powertrain Control Module. This is a direct-fit replacement for part 09366810, solving issues like rough idle, poor shifting, and no-start conditions. Order now and provide your VIN for a plug-and-play solution!

$115.00

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-06234B-44 Categories: ,
Guaranteed Safe Checkout

Restore Your Vehicle’s Heartbeat and Drive with Confidence

Is your trusty Astro or GM truck feeling a bit off? Maybe it’s a persistent Check Engine Light, rough idling that makes you nervous at stoplights, or hesitation when you need power the most. These aren’t just annoyances; they’re signs that your vehicle’s brain—the Powertrain Control Module (PCM)—is struggling. Don’t let frustrating electrical gremlins keep you off the road. This direct-fit PCM, programmed specifically for your vehicle, is the definitive solution to restore the smooth, reliable performance you depend on.

Warning Signs and How to Overcome Them

A failing PCM can manifest in numerous ways, often mimicking other component failures. By replacing it, you can solve a host of issues and regain that worry-free drive. Here’s what this module is designed to fix:

  • ✔ Eliminate Stalling & Rough Idle: Get back to smooth, predictable engine performance.
  • ✔ Solve Transmission Problems: Corrects harsh shifting, failure to shift, or erratic gear changes.
  • ✔ Clear Diagnostic Trouble Codes (DTCs): A permanent fix for codes like P0601, P0605, and other internal controller errors.
  • ✔ Restore Fuel Efficiency: A properly functioning PCM ensures the optimal air-fuel mixture, saving you money at the pump.
  • ✔ Pass Emissions Testing: Resolves issues that cause automatic smog test failures.
  • ✔ Fix No-Start Conditions: Addresses communication errors that prevent the engine from starting.

The Power of a Pre-Programmed Solution

The biggest hurdle in replacing a modern engine computer is programming. We’ve eliminated that completely. When you order, simply provide us with your vehicle’s VIN. Our experts will flash this module with the latest, most stable GM-certified software specific to your exact make, model, and options. It arrives at your door ready to install, saving you a costly trip to the dealership and the hassle of specialized tools. This is the key to a straightforward, successful repair.

A Mechanic’s Note: The Comeback King

“I had a customer with a ’99 GMC Sierra, a workhorse he’d owned since it was new. It was stalling randomly and shifting so hard he was afraid to drive it. He’d replaced sensors and was about to sell it for scrap. We traced it to the PCM. After installing one of our pre-programmed units, the truck ran like it just rolled off the line. He called me a week later, overjoyed. It wasn’t just about fixing a truck; it was about saving a part of his history. That’s the impact a reliable component can have.”

– 20-Year ASE Certified Technician

Guided Installation for a Confident Fix

You don’t need to be a master mechanic to complete this job. With basic hand tools and a little patience, you can have your vehicle running right in under an hour. Follow these steps for a smooth installation:

  1. Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait 10-15 minutes for the system to discharge completely.
  2. Locate the Module: On most of these vehicles, the PCM is located in the engine compartment, often on the driver’s or passenger’s side fender well or near the battery.
  3. Disconnect the Harnesses: Carefully unplug the electrical connectors from the old PCM. They have locking tabs that may need to be gently pried or squeezed to release. Inspect the connectors for any corrosion or damage.
  4. Swap the Modules: Unbolt the old PCM from its mounting bracket and set it aside. Secure the new module in its place.
  5. Reconnect and Secure: Firmly plug the electrical harnesses into your new PCM. You should hear or feel a click as they lock into place.
  6. Power Up: Reconnect the negative battery terminal and tighten it securely.
  7. Perform Security Relearn: Your vehicle may require a simple security relearn procedure to recognize the new PCM. This typically involves turning the key to the ‘ON’ position for 10-15 minutes. Consult your owner’s manual for the specific steps for your vehicle.

Tailored Fit for Your GM Truck, Van, or SUV

This 1998-1999 Astro PCM is engineered for seamless compatibility with a wide range of GM vehicles. Please verify your part number (16250279, 09366810, or 09355699) and check the list below to ensure a perfect fit:

  • Astro / Safari Van: 1998-1999
  • Blazer / Jimmy / Bravada / Envoy: 1998
  • S10 / Sonoma / Hombre: 1998
  • Chevrolet / GMC 1500/2500/3500 Pickups: 1998-1999
  • Tahoe / Yukon / Escalade: 1998-1999
  • Suburban 1500/2500: 1998-1999
  • Express / Savana 1500/2500/3500 Vans: 1998

Note: Please match your original part number or consult the detailed fitment list to confirm compatibility. Providing your VIN is mandatory for programming.

Frequently Asked Questions

Do I need to do any programming or flashing myself?

Absolutely not. This is the primary benefit of our service. We handle all the programming before we ship the module to you. All we need is your vehicle’s VIN to load the correct GM software. It arrives ready for installation.

How do I provide my VIN?

After you complete your purchase, you will receive instructions on how to send us your 17-digit Vehicle Identification Number (VIN). We cannot ship your part until we receive this information.

Where is the PCM located on my 1999 Chevy Astro?

On the 1998-1999 Astro and Safari vans, the PCM is typically located in the engine compartment on the driver’s side, near the battery and coolant overflow tank.

What is the security relearn procedure?

It’s a simple process that allows your vehicle’s anti-theft system to synchronize with the new PCM. A common method is the ’10-Minute Relearn’: turn the key to the ‘ON’ position (without starting the engine) for 10 minutes, then turn it ‘OFF’ for 10 seconds. Repeat this two more times for a total of 3 cycles. Your vehicle should then start normally.

Will this fix my specific problem or Check Engine Light code?

This module is a direct solution for internal PCM failures, which cause a wide range of symptoms and codes (like P0601). While it resolves many issues, it’s crucial to ensure your vehicle has been properly diagnosed. A faulty PCM can mimic sensor or wiring failures, so a thorough diagnosis is always recommended for a successful repair.

Condition

Refurbished

MPN

09366810

Year
Genuine OEM

Yes

Interchange part number

PartNumber

590

Model

astro

Year

1998

Brand

GM

Manufacturer Part Number

, ,

Scroll to Top