Is Your 1997 Camaro or Firebird Running Rough?
If you’re dealing with frustrating issues like a persistent check engine light, erratic shifting, a rough idle, or even a no-start condition, a failing Powertrain Control Module (PCM) is often the culprit. In my 20+ years as a diagnostician, I’ve seen how a faulty PCM can create a cascade of problems that seem unrelated, making it a nightmare to pinpoint. The PCM is the brain of your vehicle, and when it starts to fail, it affects everything from fuel delivery to spark timing and transmission control.
This isn’t just a replacement part; it’s a direct solution. We provide a reliable PCM that is professionally programmed with the latest GM software updates specifically for your vehicle’s VIN. This critical step ensures that all factory parameters are correctly set, restoring the performance and reliability you expect from your car.
Expert Pro Tip: Check Your Connectors
Before installing your new PCM, take a moment to inspect the vehicle’s harness connectors. Over the decades, these connectors can accumulate dirt, moisture, or corrosion (a greenish-white powder). Use a quality electronics cleaner and a small nylon brush to gently clean the pins and sockets. A clean, solid connection is vital for the new module to function correctly and prevents damage to the sensitive internal circuits.
The Simple, Reliable Fix for Your 1997 GM Vehicle
Forget about expensive dealership visits and the hassle of finding a shop that can program older modules. This unit arrives at your door ready for installation. By providing your VIN at checkout, you get a module that is a true plug-and-play component for your specific vehicle.
- ✔ VIN-Programmed for Your Car: We flash the module with your vehicle’s specific information and the newest GM calibrations for optimal performance.
- ✔ Solves Common Failure Symptoms: Effectively addresses issues like false sensor codes, poor fuel economy, harsh transmission shifts, and intermittent stalling.
- ✔ No Additional Programming Needed: This module is ready to be installed right out of the box, saving you time and money.
- ✔ Broad Compatibility: A direct-fit solution for a wide range of 1997 GM models equipped with the 3.8L V6 and 3.4L V6 engines.
Easy Installation Guide for Your 1997 Camaro PCM
Replacing the PCM is a straightforward job that most DIY mechanics can handle in under an hour with basic tools. Follow these steps for a smooth installation:
- Safety First: Disconnect the negative terminal from your vehicle’s battery and secure it away from the post to prevent any accidental reconnection.
- Locate the PCM: On a 1997 Camaro or Firebird, the PCM is typically located on the passenger side of the engine compartment, near the fender.
- Disconnect the Harness: Carefully unlatch and remove the electrical harness connectors from the old module. There are usually several color-coded connectors with locking tabs.
- Remove the Old Module: Unbolt the PCM from its mounting bracket. It’s usually held in place by a few small bolts or nuts.
- Install the New Module: Mount your new, pre-programmed PCM onto the bracket and secure it. Reconnect the electrical harnesses, ensuring each one clicks firmly into place.
- Reconnect the Battery: Reattach the negative battery terminal. Your vehicle is now ready to start. The computer will perform a self-learning process as you drive.
Guaranteed Fitment
This electronic control module is a direct replacement for part numbers 16227797 and 19109047. It is guaranteed to fit the following 1997 models with the specified engine options:
- Bonneville: 1997 w/ 3.8L Supercharged Engine
- Camaro: 1997 w/ 3.8L Engine
- Eighty Eight: 1997 w/ 3.8L Supercharged Engine
- Firebird: 1997 w/ 3.8L Engine
- Grand Prix: 1997 w/ 3.8L Supercharged Engine
- Lumina Car: 1997 w/ 3.4L Engine
- Monte Carlo: 1997 w/ 3.4L Engine
- Park Avenue: 1997 w/ 3.8L Engine
- Regal: 1997 w/ 3.8L Supercharged Engine
- Riviera: 1997 w/ 3.8L Engine
Order today and restore your vehicle’s proper function with a reliable, correctly programmed powertrain control module. Simply provide your VIN and let us handle the rest.