Restore Your Vehicle’s Electrical Functions with a Plug-and-Play BCM
If your 2014-2015 Chevy Volt is plagued by bizarre electrical problems—like power windows with a mind of their own, flickering interior lights, or a security system that prevents the car from starting—you’re likely dealing with a failing Body Control Module (BCM). As an expert technician with over two decades of experience, I’ve seen firsthand how a faulty BCM can turn a reliable vehicle into a source of constant frustration. It’s the central command center for all your car’s comfort and convenience features, and when it goes, chaos ensues.
Forget the expensive dealership visit and the hassle of programming a new module from scratch. Our professional cloning service is the simplest, most reliable solution. You ship us your original BCM, and we transfer all its critical data—including VIN, mileage, and key information—to a fully tested replacement unit. We then ship the ready-to-install module back to you. This means no additional programming, no expensive diagnostic tools, and no trip to the dealer. It’s a true plug-and-play fix designed to get you back on the road quickly and affordably.
A Technician’s Notebook: The Case of the Spooked Volt
A customer brought in a 2014 Volt with a list of complaints that sounded like something out of a ghost story. The dome lights would randomly pulse, the radio would shut off, and occasionally the car wouldn’t recognize the key fob. They had already replaced the battery, but the issues persisted. My initial scan showed a handful of communication codes (U-codes), pointing to a network issue. After isolating other modules, all signs pointed to the BCM. Instead of a costly new unit from the dealer, we performed a clone service just like this one. The customer installed the programmed module in their driveway, and every single electrical gremlin vanished. It’s a classic example of how a failing 2014-2015 Volt BCM can mimic a dozen other problems.
Common Signs of a Failing BCM
The Body Control Module manages a wide array of functions. If you’re experiencing any of the following, your BCM is the most likely culprit:
- ✔ Erratic or non-functional power windows, door locks, and mirrors.
- ✔ Interior or exterior lights that stay on, flicker, or don’t work at all.
- ✔ The security or anti-theft light is illuminated, and the vehicle may not start.
- ✔ Instrument cluster gauges behaving erratically or going dark.
- ✔ Remote keyless entry (key fob) not working correctly.
- ✔ Diagnostic Trouble Codes (DTCs) related to communication, such as U0140, U0155, or other U-codes.
Your Straightforward BCM Installation Guide
Installing your pre-programmed BCM is a manageable job for a confident DIYer. For the 2014-2015 Volt, the BCM is located in the engine compartment on the right-hand (passenger) side.
- Safety First: Always disconnect the negative terminal from your vehicle’s 12V battery and secure it away from the post.
- Locate the BCM: Open the hood and find the BCM, typically situated in the right-hand (passenger side) of the engine compartment.
- Disconnect and Remove: Carefully unplug all electrical connectors. Note their orientation. Then, unbolt the module from its mounting bracket and remove it from the vehicle.
- Install the Replacement: Mount your new, pre-programmed BCM in the same location. Securely reconnect all electrical connectors into their correct slots.
- Reconnect Power: Reattach the negative battery terminal.
- Perform Final Checks: Start the vehicle and test all body functions—windows, locks, lights, wipers, etc. Note that some post-install procedures may be necessary (see below).
Important Post-Installation Information
While our cloning service makes this a plug-and-play repair, some vehicle systems may require a quick handshake with the new BCM. Please be aware of the following potential procedures:
- Airbag System Sync: If the airbag warning light is on after installation, a simple ‘Setup SDM Primary Key in BCM’ procedure is needed. This requires a professional-grade scan tool to sync the modules and clear the light.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be required to ensure your brake lights and traction control system function correctly.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Will This Fit My Vehicle?
This BCM is a direct-fit, programmed replacement for a wide range of GM vehicles and part numbers. Please verify your part number or vehicle model from the list below. This module is compatible with part numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, and 13594564.
- Buick LaCrosse: 2014-2015, 2016 (ID 13580698 or 13594564)
- Buick Regal: 2014-2017
- Cadillac ELR: 2014-2016
- Cadillac SRX: 2014-2016
- Chevrolet Camaro: 2014 (Convertible), 2015
- Chevrolet Malibu: 2014-2015, 2016 (Limited, VIN 1)
- Chevrolet Spark EV: 2014-2016 (Electric Model)
- Chevrolet Volt: 2014-2015
How does this cloning service work?
How does this cloning service work?
It’s simple. After you place your order, we’ll contact you with instructions to ship your original BCM to us. Once we receive it, our technicians will extract the unique vehicle data and transfer it to a replacement module. We then ship the fully programmed, ready-to-install BCM back to you.
Do I need to send my keys or any other parts?
How does this cloning service work?
It’s simple. After you place your order, we’ll contact you with instructions to ship your original BCM to us. Once we receive it, our technicians will extract the unique vehicle data and transfer it to a replacement module. We then ship the fully programmed, ready-to-install BCM back to you.
Why is my airbag light on after installing the new BCM?
How does this cloning service work?
It’s simple. After you place your order, we’ll contact you with instructions to ship your original BCM to us. Once we receive it, our technicians will extract the unique vehicle data and transfer it to a replacement module. We then ship the fully programmed, ready-to-install BCM back to you.
Is there a core charge for this part?
How does this cloning service work?
It’s simple. After you place your order, we’ll contact you with instructions to ship your original BCM to us. Once we receive it, our technicians will extract the unique vehicle data and transfer it to a replacement module. We then ship the fully programmed, ready-to-install BCM back to you.
How long does the service take?
How does this cloning service work?
It’s simple. After you place your order, we’ll contact you with instructions to ship your original BCM to us. Once we receive it, our technicians will extract the unique vehicle data and transfer it to a replacement module. We then ship the fully programmed, ready-to-install BCM back to you.