Restore Your Camaro’s Performance with a Plug-and-Play BCM Solution
If you’re dealing with baffling electrical issues in your 2014-2015 Chevrolet Camaro—like flickering dash lights, power windows with a mind of their own, or a security system that prevents your car from starting—the Body Control Module (BCM) is the likely culprit. As a technician with over two decades of experience, I’ve seen how a failing BCM can turn a reliable vehicle into a source of constant frustration. It’s the central nervous system for your car’s comfort and convenience features, and when it fails, chaos ensues. Forget the dealership’s high prices and lengthy programming appointments. We offer a straightforward, reliable solution that gets you back on the road fast.
This is not just a replacement part; it’s a comprehensive programming service. Here’s how it works: After your purchase, you’ll ship your original BCM to us. We then transfer its unique data—including your vehicle’s specific options and security information—directly onto this replacement module. The result is a fully synchronized, plug-and-play unit. This cloning process is critical because it ensures all systems communicate correctly, just as they did from the factory, eliminating the need for expensive dealer-specific tools for programming.
From the Diagnostic Bay: The Case of the Haunted Camaro
A customer brought in a 2015 Camaro convertible with a list of complaints that sounded like a ghost was in the machine. The radio would change stations on its own, the interior lights would pulse randomly, and occasionally, the power top wouldn’t operate. There were no consistent trouble codes, just a slew of intermittent communication errors (U-codes). After ruling out wiring and grounding issues, we pinpointed the BCM. Instead of a costly new module and hours of programming at the dealer, we opted for a cloned unit. The customer sent us their original BCM, we performed our service, and sent the replacement back. They installed it in under an hour, and every single electrical gremlin vanished. It’s a perfect example of how the right part and process can save hundreds of dollars and a massive headache.
Is Your Camaro’s BCM Failing?
A faulty Body Control Module can manifest in numerous ways. Look out for these common indicators that it’s time for a replacement. In my shop, these symptoms almost always point to a BCM issue, often accompanied by communication codes like U0140.
- ✔ Erratic or non-functional power windows, locks, and mirrors.
- ✔ Interior or exterior lights flickering, staying on, or not working at all.
- ✔ Horn honking unexpectedly or not working when pressed.
- ✔ Key fob not being recognized, leading to starting issues.
- ✔ False warnings on the instrument cluster (e.g., “Service Theft Deterrent System”).
- ✔ Wipers operating intermittently or not parking correctly.
Your Straightforward BCM Installation Guide
Installing your programmed 2014-2015 Camaro BCM is a manageable job for a DIYer with basic tools. For the Camaro, the BCM is typically located behind the right-hand side of the dashboard.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes before beginning work.
- Access the Module: You will need to remove the glove box or lower dash trim panels on the passenger side to gain access to the BCM.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt the module from its mounting bracket.
- Install the New Module: Mount your new, programmed BCM in place and securely reconnect all electrical connectors.
- Final Steps: Reinstall the trim panels and reconnect the battery terminal. Start the vehicle to confirm that the electrical issues are resolved.
Important Post-Installation Note: In some cases, additional steps may be required. If your airbag light is on, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. Similarly, a Brake Pedal Position Relearn might be necessary for proper brake light and traction control function. Always consult a factory service manual for specifics related to your vehicle.
Will This Fit My Vehicle?
This BCM is a direct-fit, programmed solution for a wide range of GM vehicles. Please verify that your vehicle and original part number are on this list. This module is compatible with part numbers: 13580698, 13578458, 13589115, 13589637, 13590173, 13590851, 13591300, 13592376, 13593775, 13593776, and 13594564.
- Buick LaCrosse: 2014-2016
- Buick Regal: 2014-2017
- Cadillac ELR: 2014-2016
- Cadillac SRX: 2014-2016
- Chevrolet Camaro: 2014-2015
- Chevrolet Malibu: 2014-2016 (including Limited models)
- Chevrolet Spark EV: 2014-2016 (electric model)
- Chevrolet Volt: 2014-2015
Frequently Asked Questions About Our Service
How does the cloning service work?
How does the cloning service work?
After you place your order, we will contact you with instructions to ship your original BCM to our facility. Once we receive it, our technicians will extract the vehicle-specific data and transfer it to the replacement module. We then ship the ready-to-install module back to you, typically within 1-2 business days of receiving your original part.
Do I need to have the new BCM programmed by a dealer?
How does the cloning service work?
After you place your order, we will contact you with instructions to ship your original BCM to our facility. Once we receive it, our technicians will extract the vehicle-specific data and transfer it to the replacement module. We then ship the ready-to-install module back to you, typically within 1-2 business days of receiving your original part.
What is a core charge? Do I need to send my old part back?
How does the cloning service work?
After you place your order, we will contact you with instructions to ship your original BCM to our facility. Once we receive it, our technicians will extract the vehicle-specific data and transfer it to the replacement module. We then ship the ready-to-install module back to you, typically within 1-2 business days of receiving your original part.
What if the airbag light comes on after installation?
How does the cloning service work?
After you place your order, we will contact you with instructions to ship your original BCM to our facility. Once we receive it, our technicians will extract the vehicle-specific data and transfer it to the replacement module. We then ship the ready-to-install module back to you, typically within 1-2 business days of receiving your original part.
Is this a guaranteed fix for my car’s problems?
How does the cloning service work?
After you place your order, we will contact you with instructions to ship your original BCM to our facility. Once we receive it, our technicians will extract the vehicle-specific data and transfer it to the replacement module. We then ship the ready-to-install module back to you, typically within 1-2 business days of receiving your original part.