2009 Corvette Engine Control Module 12625453 Programmed To Your VIN VIN ECM PCM

Plug-and-Play Engine Control Solution

Get your 2009 Corvette back to peak performance with this Engine Control Module (12625453). It arrives fully programmed to your VIN with the latest GM software for a simple, no-hassle installation. Fix check engine lights, stalling, and performance issues today. Provide your VIN at checkout and we’ll handle the rest!

$149.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01536-24 Categories: ,
Guaranteed Safe Checkout

Restore Peak Performance to Your High-Powered Machine

Is your 2009 Corvette suffering from mysterious electrical gremlins, a persistent check engine light, or a frustrating no-start condition? The Engine Control Module (ECM), often called the brain of your vehicle, is the central command unit responsible for managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it begins to fail, it can cause a cascade of confusing and performance-robbing symptoms. This genuine GM Engine Control Module, part number 12625453, is the definitive solution to restore your vehicle’s factory performance, drivability, and reliability.

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the guesswork and additional expense out of the repair process. Upon purchase, simply provide us with your vehicle’s 17-digit Vehicle Identification Number (VIN). Our certified technicians will then program the module with the very latest, most stable software updates directly from General Motors. This ensures perfect compatibility with your Corvette’s specific systems, including the anti-theft system (VATS), and often corrects underlying software issues that may have existed even with your original module. The result is a true plug-and-play installation with no need for an expensive trip to the dealership for programming.

From the Diagnostic Bay

We once had a 2009 Corvette ZR1 in the shop with an intermittent stalling issue that was driving the owner crazy. He had already replaced the crankshaft position sensor, camshaft position sensor, and even the fuel pump based on various recommendations. The car would run fine for days, then suddenly die at a stoplight. After hours of diagnostics, we traced the issue to a failing driver circuit inside the original ECM that controlled the ignition coils. It would overheat and momentarily cut power. Installing a correctly programmed 2009 Corvette ECM like this one not only solved the stalling issue instantly but also improved the car’s throttle response, thanks to the updated GM software we flashed onto it. It’s a perfect example of how chasing symptoms can be costly, while addressing the root cause with the right part is the most effective fix.

Is Your 2009 Corvette ECM Failing?

A faulty engine computer can manifest in numerous ways, often mimicking other component failures. If you’re experiencing any of the following, a failing ECM could be the culprit. This replacement module is designed to resolve these common problems and get you back on the road with confidence.

  • ✔ Check Engine Light: An illuminated Check Engine Light (CEL) with communication-related codes (U-codes) or multiple seemingly unrelated sensor codes is a strong indicator of an ECM issue.
  • ✔ No-Start or Hard-Starting: The engine cranks but refuses to start, or takes an excessively long time to fire up, especially when warm.
  • ✔ Poor Engine Performance: Noticeable loss of power, hesitation during acceleration, and rough idling.
  • ✔ Reduced Fuel Economy: A sudden and unexplained drop in your vehicle’s gas mileage as the ECM fails to manage the air-fuel mixture correctly.
  • ✔ Intermittent Stalling: The engine randomly shuts off while driving or when coming to a stop.
  • ✔ Automatic Transmission Issues: Harsh shifting, delayed engagement, or getting stuck in a single gear (limp mode) can be caused by poor communication with the ECM.

VIN-Programmed for a Seamless Installation

The key to a successful ECM replacement is proper programming. This module is not a one-size-fits-all part. It must be specifically calibrated to your vehicle’s VIN to communicate with the other modules, sensors, and security systems. Our professional programming service handles this for you. By flashing the unit with your VIN and the latest GM software, we ensure it works perfectly out of the box. This eliminates the need for special scan tools or dealership intervention, saving you time and money.

Broad Compatibility Across the GM Family

While this is the ideal 2009 Corvette ECM, part number 12625453 is also a direct replacement for a wide range of other GM vehicles. It is fully interchangeable with service numbers 12636659, 12639300, 1263605, 12628993, 12628911, 12622175, 12630464, and 12678512. It fits models such as the Cadillac CTS, STS, DTS, and SRX; Chevrolet Colorado and Trailblazer; GMC Canyon and Envoy; Hummer H3; and more. Please verify the part number or consult the fitment list to ensure compatibility with your specific vehicle.

Frequently Asked Questions

Do I need to do any additional programming after I receive this ECM?

No. This ECM comes fully programmed to your vehicle’s VIN with the latest GM software. In most cases, it is a direct plug-and-play installation. Some vehicles may require a simple security relearn procedure, which can be done without any special tools and typically takes about 10-15 minutes. Instructions are readily available online for this process.

How do I provide my VIN?

After you place your order, you can send us a message with your 17-digit VIN. You can find your VIN on your vehicle’s registration, insurance card, or on the driver’s side dashboard visible through the windshield.

Will this fix my specific problem or check engine light?

This module is a direct solution for a failed ECM. If your vehicle has been properly diagnosed with a faulty engine computer, this part will resolve the associated symptoms and check engine codes. It will not fix issues caused by other faulty components like sensors or wiring.

Is this a new or used part?

This is a high-quality, tested, and guaranteed functional OEM part. Each unit is inspected and then programmed by our technicians to ensure it meets or exceeds factory specifications for performance and reliability.

My original part number is slightly different but on your interchange list. Will this work?

Yes. GM often updates part numbers over the years. The service numbers listed (like 12636659, 12639300, etc.) are all 100% interchangeable. As long as your original part number is on our list, this module will be a correct replacement for your vehicle.

Genuine OEM

Yes

Year

MPN

12625453

Interchange part number

Condition

Refurbished

PartNumber

590

Model

CORVETTE

Make

Year

2009

Brand

CHEVROLET TRUCK

Manufacturer Part Number

, , , , , , , ,

GTIN

Does not apply

Scroll to Top