2006-2007 Rendezvous Powertrain Control Module PCM 12600928 Programmed

Experiencing stalling, no-start, or random check engine lights?

Your 2006-2007 Rendezvous’s PCM might be the culprit. This Powertrain Control Module (part #12600928) arrives programmed to your vehicle’s VIN with the latest GM software. It’s a direct-fit solution to restore performance and reliability without a costly dealer visit. Fix your issue today!

$114.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-00140-13 Categories: ,
Guaranteed Safe Checkout

Is Your Rendezvous or GM Vehicle Running Erratically? The PCM is a Likely Suspect.

As a diagnostic technician for over two decades, I’ve seen countless drivers get frustrated by vehicles that seem to have a mind of their own. One day your 2006 Pontiac G6 runs fine, the next it’s stalling at a stoplight. Your 2007 Buick Rendezvous might throw a check engine light for a sensor you just replaced, or your Chevy Equinox might refuse to start on a cold morning for no apparent reason. These baffling, intermittent problems often point to one central component: a failing Powertrain Control Module (PCM).

The PCM is the electronic brain of your vehicle’s engine and transmission. It processes information from dozens of sensors to manage everything from fuel injection and spark timing to transmission shift points and emissions controls. When it starts to fail, the symptoms can be widespread and confusing, leading to incorrect diagnoses and wasted money on unnecessary parts.

A Real-World Story: The Phantom Misfire

“A customer’s 2006 Chevy Malibu came in last week with these exact symptoms. He had spent hundreds replacing spark plugs, ignition coils, and even an oxygen sensor trying to fix a persistent P0300 random misfire code. The engine ran rough, and fuel economy was terrible. After checking all the new parts, which were fine, we hooked up our professional scan tool. We noticed the PCM was slow to respond and was sending erratic signals to the coils. The internal processors were failing. We installed a VIN-programmed PCM, and the car immediately ran like new. The customer was relieved to finally have the real problem solved.”

Common Symptoms of a Failing 12600928 PCM

If your vehicle is experiencing any of the following, a faulty PCM is a strong possibility. I’ve personally traced these issues back to the module hundreds of times in my shop:

  • โœ” Check Engine Light: The light is on, often with communication error codes (like U0100 – Lost Communication with ECM/PCM) or false sensor codes that keep returning after parts are replaced.
  • โœ” Engine Stalling: Your vehicle may stall unexpectedly while driving or when coming to a stop.
  • โœ” No-Start Condition: The engine cranks but refuses to start, even with a good battery and fuel.
  • โœ” Poor Performance: You may notice a significant drop in power, acceleration, and fuel efficiency.
  • โœ” Erratic Transmission Shifting: The transmission may shift harshly, slip between gears, or get stuck in one gear (limp mode).
  • โœ” Intermittent Misfires: The engine misfires randomly, even with new ignition components.

The Direct-Fit, Programmed Solution

This Powertrain Control Module is the definitive solution to these problems. It’s not just a replacement part; it’s a fully prepared component that restores your vehicle’s core functionality. The most critical aspect of this module is our professional programming service.

Before we ship your part, we flash it with the latest GM-authorized software updates and program it specifically to your vehicle’s VIN. This is a step that typically requires an expensive trip to a dealership. By doing it for you, we ensure the module is ready for installation right out of the box.

Why Our VIN-Programmed PCM is the Smart Choice

  • โœ” No Dealer Visit Required: Save hundreds of dollars and the hassle of having the module programmed after installation.
  • โœ” VIN-Specific Flashing: We match the software to your exact vehicle, ensuring perfect communication with the anti-theft system (Passlock/VATS), transmission, and all other onboard computers.
  • โœ” Latest GM Updates: Your module comes with the most current software, which can resolve factory bugs and improve performance and efficiency.
  • โœ” Simple Installation: Located in the left-hand (driver’s side) front of the engine compartment on most models, swapping the module is a straightforward job for a DIYer or any professional mechanic. Just disconnect the battery, unbolt the old unit, and plug this one in.

Guaranteed Compatibility

This module, service part number 12600928 (interchangeable with 19210070), is the correct fit for the following vehicles:

  • โœ” 2006 Pontiac G6 (with ID 12600928)
  • โœ” 2006-2007 Buick Rendezvous (3.5L)
  • โœ” 2006 Chevrolet Uplander (3.5L)
  • โœ” 2006 Pontiac Torrent
  • โœ” 2006 Chevrolet Malibu (3.5L)
  • โœ” 2006 Chevrolet Equinox
  • โœ” 2006 Buick Terraza (3.5L)
  • โœ” 2006 Pontiac Montana (SV6, 3.5L)

Don’t let a faulty PCM keep you off the road. Restore your vehicle’s reliability and performance with this professionally programmed, ready-to-install Powertrain Control Module. Please provide your VIN at checkout so we can get started on your order immediately.

Condition

Refurbished

MPN

12600928

Genuine OEM

Yes

PartNumber

590

Model

RENDEZVOUS

Year

2006

Brand

GM

Manufacturer Part Number

,

Interchange part number

Scroll to Top