Restore Your Vehicle’s Electrical System with a Plug-and-Play BCM
Are you tired of dealing with baffling electrical problems in your 2007-2009 Chevrolet Equinox or other GM vehicle? Flickering dash lights, power windows with a mind of their own, or a security system that randomly goes off are classic signs of a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, a faulty BCM can make your daily drive incredibly frustrating. In my 20+ years of diagnostics, I’ve seen how a single failing module can mimic a dozen different problems, leading to wasted time and money on incorrect repairs.
This isn’t just another part; it’s a complete, reliable solution. We take a genuine OEM-quality Body Control Module and flash it with the latest official GM software, specifically programmed to your vehicle’s VIN. This means you get a part that’s ready to install right out of the box, eliminating the need for an expensive trip to the dealership for programming. We handle the complex part so you can focus on the straightforward installation and get your vehicle back to 100% functionality.
From the Diagnostic Bay: A Technician’s Notebook
A customer brought in their 2008 GMC Acadia with a list of bizarre symptoms: the radio would turn off randomly, the driver’s side power lock didn’t work, and the dome light would stay on, draining the battery. They had already replaced the battery and checked fuses with no luck. After connecting my scan tool, I saw multiple communication error codes pointing towards the BCM. Instead of sending them to a dealer for a new module and a hefty programming fee, we provided a pre-programmed unit just like this one. The swap took less than an hour, and all the strange electrical gremlins were gone instantly. This is the value of a part that’s prepared for your specific vehicle before it even ships.
Is Your Vehicle Showing These Symptoms?
A failing BCM can cause a wide array of issues. If you’re experiencing any of the following, this module is the likely solution:
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Erratic behavior from interior or exterior lights (flickering, staying on, or not turning on).
- ✔ Malfunctioning security system or keyless entry.
- ✔ Dashboard warning lights that appear without a clear cause.
- ✔ Communication errors with other vehicle modules (DTC codes starting with ‘U’).
- ✔ Problems with the radio or climate control systems.
Your Straightforward BCM Installation Guide
Installing your new 2007-2009 Equinox Body Control Module is a manageable job for a DIYer with basic tools. Follow these steps to ensure a smooth process.
- Safety First: Always disconnect the negative terminal from your vehicle’s battery and wait a few minutes to ensure all systems are powered down.
- Locate the BCM: On a 2007-2009 Equinox, the BCM is typically located in the center dash area. For other models, its location can vary (e.g., under the steering column, behind the dash). Consult a vehicle-specific repair guide if you’re unsure.
- Remove Trim Panels: Carefully remove any plastic trim or panels necessary to access the BCM. Use a trim removal tool to avoid scratching or breaking clips.
- Disconnect and Remove: Unplug the electrical connectors from the old BCM. They have locking tabs that must be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket and remove it.
- Install the New Module: Mount your new, pre-programmed BCM in the same location and reconnect all electrical connectors, ensuring they click securely into place.
- Post-Installation Procedures: Reconnect the battery. You will need to perform a couple of critical relearn procedures. Using a capable diagnostic scan tool, perform the ‘Setup SDM Primary Key in BCM’ to clear the airbag light. Some vehicles may also require a Brake Pedal Position Sensor Calibration. These steps are essential for safety and proper function.
- Test Everything: Start the vehicle and test all body functions: windows, locks, lights, radio, etc., to confirm the repair was successful.
Verified Vehicle Compatibility
This BCM is a direct replacement for a wide range of General Motors vehicles. Please verify your part number and model from the list below. This unit replaces part numbers including 10382479, 15819552, 15921352, 20815898, 22860591, 25892622, and many more.
TORRENT 07-09 Body Control (BCM); (center dash)
ACADIA 07-12 Body Control (BCM); (LH dash)
ENCLAVE 08-12 Body Control (BCM); (LH dash)
OUTLOOK 07-10 Body Control (BCM); (center dash)
TRAVERSE 09-12 Body Control (BCM); (LH dash)
IMPALA 06-12 Body Control (BCM); (LH dash)
MONTE CARLO 06-07 Body Control (BCM); (LH steering column)
LUCERNE 06-11 Body Control (BCM); (right side dash)
DTS 06-11 Body Control (BCM); (RH center dash)
CTS 08-13 Body Control (BCM); LH dash
SRX 07-09 Body Control (BCM); LH dash
TAHOE/YUKON/ESCALADE 10 Body Control (BCM); (under steering column)
SUBURBAN/YUKON XL 10 Body Control (BCM); (under steering column)
AVALANCHE 10 Body Control (BCM); (under steering column)
EXPRESS/SAVANA VANS 08-12 Body Control (BCM); (center dash)
HUMMER H2 08-09 Body Control (BCM); (LH firewall)
…and many other models. Please check the full list or contact us with your VIN to confirm fitment.
Frequently Asked Questions
Do I need to program this BCM?
No. The main benefit of our service is that this Body Control Module comes pre-programmed to your vehicle’s specific VIN. This saves you a trip to the dealership and the associated programming fees. You will, however, need to perform a couple of minor relearn procedures after installation as noted in the guide.
What information do you need from me?
After you complete your purchase, you must provide us with your vehicle’s 17-digit VIN (Vehicle Identification Number). We cannot program and ship the module without it. This ensures the software is a perfect match for your vehicle’s options and configuration.
What tools are needed for the post-installation procedures?
To perform the ‘Setup SDM Primary Key in BCM’ (for the airbag system) and the ‘Brake Pedal Position Sensor Calibration’, you will need a professional-grade bidirectional scan tool. Many advanced DIY and all professional mechanic scan tools have this capability. If you do not have one, a local repair shop can perform these quick procedures for you.
Is this a new or used part?
This is a top-quality, inspected, and tested recycled OEM part that has been restored to full functionality. We load it with the newest, clean software directly from GM, ensuring it performs reliably, just like a new module from the dealer, but at a fraction of the cost.
Where is the BCM located on my 2008 Chevy Equinox?
For the 2007-2009 Chevrolet Equinox and Pontiac Torrent, the Body Control Module is located inside the center of the dashboard, typically part of the center console stack assembly.