Programmed 2001 Silverado BCM 9392990 | Flashed to Your VIN

Restore Your Truck’s Electrical Systems with a Reliable, Programmed BCM

Are you tired of chasing electrical gremlins in your 2001 GM truck or SUV? Intermittent power windows, door locks with a mind of their own, or a security light that randomly immobilizes your vehicle are classic signs of a failing Body Control Module (BCM). As the central hub for your truck’s comfort and convenience features, a faulty BCM can cause a cascade of frustrating issues. This is a direct-fit, VIN-programmed 2001 Silverado BCM, loaded with the latest GM software to restore your vehicle’s functionality and get you back on the road with confidence.

Is Your Truck Exhibiting These BCM Failure Signs?

A failing BCM can manifest in numerous ways, often making you think multiple components have failed at once. Before you start replacing individual switches and motors, check if you’re experiencing these common symptoms:

• ✔ Erratic or non-functional power windows, door locks, or mirrors.
• ✔ The security or anti-theft light stays on, potentially causing a no-start condition.
• ✔ Interior or exterior lights flicker, stay on, or don’t work at all.
• ✔ The horn honks randomly or doesn’t work when pressed.
• ✔ Wipers operate intermittently or won’t turn off.
• ✔ Diagnostic trouble codes (DTCs) related to body systems or communication errors (e.g., U1000, B1001).

Your Straightforward Installation Guide

Replacing the BCM is a manageable job for a DIYer with basic tools. Our pre-programmed module eliminates the need for a trip to the dealership for expensive software flashing.

1. Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
2. Locate the BCM: On most of these GM trucks, the BCM is located under the driver’s side of the dashboard, to the left of the steering column.
3. Remove Trim Panels: You may need to remove the lower dash panel or knee bolster to gain clear access. These are typically held in by a few screws and clips.
4. Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt the module from its mounting bracket.
5. Install the New BCM: Mount your new, pre-programmed BCM in the same location, and securely reconnect all electrical harnesses.
6. Final Steps: Reinstall any trim panels you removed and reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all functions (windows, locks, lights, etc.).

Important Post-Installation Information

While our programming handles the core functions, your vehicle’s security and safety systems may require a handshake with the new module. In some cases, you may need to perform a ‘Brake Pedal Position Relearn’ or an ‘Airbag System Sync’ if a warning light appears. These procedures typically require a bi-directional scan tool and are often necessary to ensure all systems communicate correctly with the new 2001 Silverado BCM.

Verified Fitment for Your 2001 GM Vehicle

This module is a guaranteed fit for the following 2001 models, replacing part numbers 09375899, 9392990, 09370249, and 19180223. We program it specifically for your truck using the VIN you provide at checkout.

• ✔ 2001 Chevrolet Silverado 1500, 2500, 3500
• ✔ 2001 GMC Sierra 1500, 2500, 3500
• ✔ 2001 Chevrolet Tahoe (4×2, ID 9392990)
• ✔ 2001 Chevrolet Suburban 1500 & 2500 (ID 9392990)
• ✔ 2001 GMC Yukon (4×2, ID 9392990)
• ✔ 2001 GMC Yukon XL 1500 & 2500 (ID 9392990)