2009-2010 Sierra Denali Engine Control Module 12625455 Programmed To Your VIN

Restore Your Truck’s Performance!

Get your 2009-2010 Sierra Denali running like new with this pre-programmed Engine Control Module (ECM). We flash it with the latest GM software using your VIN for a perfect, plug-and-play fit. Solves check engine lights, poor running, and no-start issues. Order today to restore power and reliability!

$139.95

+11.99 USPS Priority Shipping

Availability: In stock



Guaranteed Safe Checkout

Restore Peak Performance to Your GM Truck or SUV

Is your 2009-2010 GMC Sierra Denali, Chevrolet Silverado, or other compatible GM vehicle suffering from perplexing issues like a persistent check engine light, rough idling, stalling, or a complete no-start condition? The Engine Control Module (ECM), the central computer of your vehicle, is often the source of these frustrating problems. It governs everything from fuel injection and ignition timing to transmission shifting and emissions control. When it fails, the entire vehicle’s performance and reliability are compromised. This replacement Engine Control Module, part number 12625455 (also compatible with 12629009), is the definitive solution to get your vehicle back on the road and running smoothly.

From the Diagnostic Bay

I once had a 2009 Silverado 2500 in the shop that was driving the owner crazy. He had already replaced two oxygen sensors and a crankshaft position sensor trying to fix an intermittent stalling issue and a handful of confusing diagnostic codes. The truck would run fine for days, then suddenly die at a stoplight. After checking the wiring harnesses and confirming the new sensors were good, we hooked up a scope to the ECM outputs. We discovered the driver circuit for the fuel injectors was dropping out intermittently when the module got warm. A new, properly programmed ECM fixed the issue completely. It’s a classic case of how a failing computer can mimic sensor or mechanical failures, making proper diagnosis essential.

Is Your Vehicle Showing Signs of ECM Failure?

A failing engine computer can manifest in various ways, often being misdiagnosed as other component failures. If you’re experiencing any of the following symptoms, a faulty ECM could be the culprit:

  • ✔ Persistent Check Engine Light (CEL) that won’t clear, especially with communication-related codes (U-codes).
  • ✔ Unexplained drop in fuel economy.
  • ✔ Engine stumbling, hesitating, or misfiring during acceleration.
  • ✔ Rough or erratic idling.
  • ✔ Difficulty starting the engine or a no-start condition where the engine cranks but won’t fire.
  • ✔ Automatic transmission shifting erratically or harshly.
  • ✔ Loss of power and sluggish performance.

The Direct-Fit Solution: A Pre-Programmed 2009-2010 Sierra Denali ECM

Don’t settle for a generic, unprogrammed module that requires an expensive trip to the dealership for coding. We eliminate that hassle. When you purchase this ECM, you provide us with your vehicle’s 17-digit VIN. Our technicians will then flash the module with the latest, most stable GM-certified software specifically for your vehicle’s configuration. This ensures that the ECM communicates flawlessly with the Body Control Module (BCM), Transmission Control Module (TCM), and all other onboard systems right out of the box. This VIN-specific programming is critical for proper engine performance, transmission function, and anti-theft system operation.

This module is a direct replacement for a wide array of popular GM vehicles from 2009 and 2010, including the Cadillac Escalade, Chevy Suburban, Tahoe, Avalanche, Express vans, and many more. Please verify your part number and check the detailed fitment list to ensure compatibility.

Frequently Asked Questions

Is this ECM really plug-and-play?

Yes, for most vehicles. Because we program it to your specific VIN, it arrives ready to install. In some cases, a simple security relearn procedure (often called a ‘CASE relearn’ or ‘anti-theft relearn’) may be required. This can typically be done without special tools and instructions are readily available online or in service manuals.

How do I provide my VIN?

After you complete your purchase, you will receive an email with simple instructions on where to send your 17-digit Vehicle Identification Number (VIN). We cannot program and ship your part until we receive this information.

Will this fix my check engine light?

This ECM will resolve any diagnostic trouble codes (DTCs) and symptoms that are directly caused by a faulty engine computer. It is crucial that you have properly diagnosed the issue. This part will not fix problems related to failed sensors, wiring issues, or mechanical failures elsewhere in the vehicle.

What’s the difference between part numbers 12625455 and 12629009?

These are interchangeable GM service numbers for the same hardware family. Our module is a direct, fully compatible replacement for either part number. The crucial factor is the VIN-specific software we install, which makes it correct for your vehicle.

Do I need to send my old computer back?

No. There is no core charge or need to return your old, faulty module. You can recycle it locally or dispose of it as you see fit.

Brand

GM

Year
Condition

Refurbished

Year

2009

MPN

12625455

Model

Sierra Denali

Hardware Type

Genuine OEM

Yes

Interchange part number

PartNumber

590

Manufacturer Part Number

,

Scroll to Top