Is Your Jeep Grand Cherokee Running Rough?
If your 2009 or 2010 Jeep Grand Cherokee or Commander with the 3.7L V6 engine is experiencing frustrating issues like stalling, erratic idling, a persistent check engine light, or a complete no-start condition, a failing Engine Control Module (ECM) is a very likely culprit. The ECM is the brain of your vehicle’s engine, managing everything from fuel injection and ignition timing to emissions controls and transmission shifting. When it fails, the symptoms can be widespread and difficult to diagnose, often leading to costly and unnecessary repairs of other components.
Don’t let a faulty computer keep your Jeep off the road. This direct-fit engine computer, part number 68059196, is the definitive solution to restore your vehicle’s performance, reliability, and drivability. We take the guesswork and hassle out of the repair process by programming this unit specifically to your vehicle’s unique Vehicle Identification Number (VIN) and current mileage. This means it arrives at your doorstep completely Plug & Play, ready for a straightforward installation without requiring any expensive trips to the dealership for additional programming.
From the Diagnostic Bay
We had a 2010 Grand Cherokee 3.7L come into the shop that was driving the owner crazy. It would randomly stall at stoplights and sometimes wouldn’t start at all after being parked. They had already replaced the crankshaft position sensor and the throttle body based on some generic advice, but the problem persisted. After hooking up our advanced scanner, we noticed communication dropouts with the main computer. We tested the wiring and power feeds to the ECM, which were all solid. The diagnosis pointed to an internal failure in the original module. Instead of a costly new unit from the dealer, we installed one of our pre-programmed modules. The installation took less than 30 minutes, and the Jeep fired right up and idled perfectly. The customer was thrilled to have their reliable vehicle back without the dealership price tag—a classic case where targeting the ‘brain’ was the correct and final fix.
Common Symptoms of a Failing 2009-2010 Grand Cherokee ECM
- ✔ Persistent and illuminated Check Engine Light (CEL)
- ✔ Engine stalling or shutting off unexpectedly while driving
- ✔ Rough or erratic engine idle
- ✔ Vehicle entering ‘limp mode’ with reduced power
- ✔ Complete no-start or intermittent starting issues
- ✔ Poor fuel economy and decreased engine performance
- ✔ Unexplained error codes for various sensors, even after replacement
- ✔ Problems with the automatic transmission shifting smoothly
The Plug & Play Advantage: Your Simple Solution
The biggest hurdle when replacing a modern vehicle’s computer is the complex programming required to sync it with the rest of the vehicle’s systems, including the anti-theft immobilizer. Our process eliminates this completely. By providing your VIN during checkout, you empower our technicians to flash the module with the correct software and security information for your specific Jeep. When you receive the part, the process is as simple as disconnecting the battery, swapping the old module with the new one, and reconnecting the battery. Your Jeep’s keys will be recognized, and the engine will operate on the correct factory parameters immediately. No special tools, no towing, no dealership appointments needed.
This module is a direct replacement for a wide range of original part numbers, ensuring compatibility and proper function. Please verify that one of the following numbers is printed on your original ECM:
Compatible Part Numbers: 05150467AA, 05150467AB, 68028166AB, 68028166AC, 68028166AD, 68028166AE, 68028166AF, 05150467AB, 68060531AB, 68060531AC, 68060531AD, 68059198AA, 68059198AB, 68028167AB, 68028167AC, 68028167AD, 68028167AE, 68028162, 68059197, 68028163, 68028154, 68059196, 68028155, 68028155AD, 68028150, 68059195, 68028151, 68028174, 68028175, 68028176
Frequently Asked Questions
What does ‘Plug & Play’ mean for this ECM?
Plug & Play means the engine computer comes fully programmed to your vehicle’s specific VIN. Once installed, it will function immediately without any need for a trip to the dealership or a mechanic for further programming. It’s ready to go right out of the box.
Do I need to have my keys reprogrammed after installation?
No. Because we flash the module with your vehicle’s security information from the VIN you provide, your existing keys will be recognized automatically. The anti-theft system will work just as it did before.
Where is the ECM located on my 2009-2010 Grand Cherokee?
On the 2009-2010 Jeep Grand Cherokee, the Electronic Control Module (ECM) is located in the engine bay, on the right-hand (passenger) side, towards the rear near the firewall. For the Jeep Commander, it is in a similar location on the right-hand side of the engine compartment.
Is this part difficult to install myself?
For someone with basic mechanical skills, the installation is straightforward. It primarily involves disconnecting the vehicle’s battery, unplugging the electrical connectors from the old ECM, unbolting it, and then bolting the new one in its place and reconnecting everything. Always disconnect the negative battery terminal before starting work.
Will this fix my check engine light?
If the check engine light and the associated diagnostic trouble codes are being caused by a faulty ECM, then yes, this replacement part is designed to resolve those issues. It’s crucial to ensure the ECM is indeed the root cause of the problem.