Is Your 2013 Minivan Experiencing Frustrating Engine Problems?
If you’re dealing with a 2013 Chrysler Town & Country or Dodge Caravan that’s suddenly stalling, refusing to start, idling erratically, or showing a persistent Check Engine Light, a failing Engine Control Module (ECM) is a very common culprit. The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to transmission shifting. When it fails, it can cause a wide range of confusing and debilitating symptoms, leaving you stranded and facing a costly trip to the dealership.
Don’t let a faulty computer sideline your family’s vehicle. This is a direct-fit, professionally programmed replacement ECM designed to solve these issues and restore your minivan’s reliability and performance. We take the guesswork and high cost out of the repair by programming the module to your vehicle’s specific VIN and mileage before it ships. This means it arrives at your door ready for a simple, plug-and-play installation.
From the Diagnostic Bay
We had a 2013 Caravan come in on a tow truck with a classic ‘crank, no-start’ condition. The owner had already replaced the fuel pump and crankshaft position sensor based on some forum advice, with no luck. When we hooked up our professional scan tool, we couldn’t communicate with the engine computer at all. Before condemning the ECM, we always perform a critical check: verifying power and ground signals at the ECM connector. We found solid 12V power and good grounds, which confirmed our suspicion. The original ECM had an internal failure. We installed one of our pre-programmed units, and the van fired right up on the first try. Always check the basics first, but a ‘no-communication’ issue often points directly to the module itself.
Common Symptoms of a Failing 2013 Town & Country ECM
If you’re experiencing any of the following issues, it’s a strong indicator that your engine computer needs to be replaced:
- ✔ Persistent Check Engine Light (CEL) that won’t clear
- ✔ Vehicle refuses to start or has a ‘crank, no-start’ condition
- ✔ Stalling unexpectedly while driving or at idle
- ✔ Rough or erratic engine idle
- ✔ Noticeable decrease in fuel economy
- ✔ Poor engine performance, hesitation, or misfires
- ✔ Automatic transmission shifting problems
- ✔ Error codes related to module communication (U-codes) or processor faults (P06xx codes)
- ✔ Inability for a scan tool to communicate with the ECM
The Plug-and-Play Advantage
Traditionally, replacing an ECM required towing your vehicle to a dealership, paying for the expensive new part, and then paying additional labor and programming fees. Our solution eliminates these steps. By providing us with your vehicle’s VIN during checkout, our technicians can flash the module with the correct software and security information for your specific Town & Country or Caravan. This ensures that when you receive the part, it integrates seamlessly with your vehicle’s existing systems, including the ignition key and anti-theft system. No special tools, no dealer visits—just a straightforward installation you can often do in your own driveway.
Guaranteed Compatibility
This ECM is a direct replacement for a wide range of original part numbers, ensuring a perfect match for your vehicle. It is compatible with the following Chrysler, Dodge, and Mopar part numbers:
05150724AC, 68164371AA, 68164371AB, 68164371AC, 68164371AD, 68164371AE, 68164371AF, 68164370AA, 68164370AB, 68164370AC, 68164370AD, 68164370AE, 68164370AF, 68164369AA, 68164369AB, 68164369AC, 68164369AD, 68164369AE, 68164369AF
This module is engineered for the following vehicles equipped with the 3.6L engine:
- 2013 Chrysler Town & Country
- 2013 Dodge Grand Caravan
Frequently Asked Questions
Is this ECM really plug and play?
Yes. As long as you provide your correct Vehicle Identification Number (VIN) during checkout, we will program the module specifically for your vehicle. This allows it to work immediately upon installation without any need for a trip to the dealership for further programming.
What information do you need from me to program the module?
We require your vehicle’s 17-digit VIN. We also ask for the current mileage, which we program into the unit for your records. The VIN is the most critical piece of information and can be found on your driver’s side dashboard (visible through the windshield) or on the sticker in the driver’s side door jamb.
Will this fix my check engine light?
If the check engine light is caused by an internal fault within your original ECM, then this replacement part will solve the problem. After installation, it is recommended to use a basic code scanner to clear any stored trouble codes to turn off the light.
Do I need to send my old computer back?
No core charge is required for this part. You do not need to send your old, faulty module back to us. We do, however, encourage you to dispose of it at a local electronics recycling facility.
How difficult is the installation?
For most DIYers with basic tools, the installation is straightforward. It typically involves disconnecting the vehicle’s battery, locating the old ECM (often in the engine bay near the battery or firewall), unplugging the electrical connectors, unbolting the module, and then installing the new one in the reverse order. The entire process can usually be completed in under an hour.