Is Your 2013 Caravan or Town & Country Experiencing Frustrating Engine Problems?
A failing Engine Control Module (ECM) can turn your reliable family minivan into a source of constant stress. If you’re dealing with unexplained check engine lights, poor fuel economy, stalling, or a vehicle that won’t start at all, the ECM is a likely culprit. The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to transmission shifting. When it fails, it can create a cascade of confusing and disruptive symptoms. Don’t let a faulty computer keep you off the road. This direct-fit replacement ECM is the solution you need to restore your vehicle’s performance and reliability.
From the Diagnostic Bay
We had a 2013 Town & Country come in with classic signs of a bad ECM: intermittent stalling at red lights and a check engine light with a host of communication codes. The owner had already replaced the alternator and battery on the advice of another shop, with no improvement. Before condemning the computer, we did a full ground circuit check. We found the main engine-to-chassis ground strap under the battery tray was corroded and frayed. After cleaning the contact points and replacing the $20 strap, all the ‘ECM’ symptoms vanished. It’s a powerful reminder: always verify the power and ground circuits to the ECM before replacing the unit itself. A solid foundation is key for any computer to operate correctly.
Common Symptoms of a Failing 2013 Caravan ECM
- ✔ Check Engine Light: The check engine light is illuminated, often with codes related to module communication, sensor circuits, or processor faults.
- ✔ No-Start Condition: The engine cranks but refuses to start, or won’t crank at all, despite having a good battery and starter.
- ✔ Engine Stalling or Misfiring: Your minivan may stall unexpectedly while driving or at idle. You might also experience rough idling or noticeable engine misfires.
- ✔ Poor Performance & Fuel Economy: A significant and sudden drop in gas mileage or a noticeable lack of acceleration and power can point to a failing computer.
- ✔ Transmission Shifting Issues: The ECM works with the transmission controller, so a faulty module can cause harsh shifting, getting stuck in gear, or other erratic transmission behavior.
- ✔ Intermittent Problems: Issues that come and go with temperature changes or seemingly at random are a hallmark of failing electronic components inside the ECM.
The Plug & Play Solution for Your Minivan
Replacing an ECM has traditionally been a costly and inconvenient process, requiring a tow to the dealership for expensive programming. Our solution eliminates that hassle. This engine computer comes fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and current mileage. This means the module arrives at your door ready for installation. There is no need for additional programming or dealer intervention. It’s a true Plug & Play solution designed to get your vehicle running smoothly again as quickly and easily as possible.
Key Features & Benefits:
- VIN-Programmed: We flash the module with your vehicle’s specific software, ensuring perfect communication with all other onboard systems.
- No Dealer Visit Required: Save hundreds of dollars and significant time by avoiding the dealership’s service bay.
- Direct-Fit Replacement: Engineered to be a direct replacement for a wide range of original part numbers, guaranteeing proper fit and function.
- Restores Original Performance: Corrects the root cause of many electronic and drivability issues, bringing your vehicle back to its factory-specified operation.
Compatible Part Numbers:
This module is a direct replacement for the following Mopar part numbers: 05150724AC, 68164371AA, 68164371AB, 68164371AC, 68164371AD, 68164371AE, 68164371AF, 68164370AA, 68164370AB, 68164370AC, 68164370AD, 68164370AE, 68164370AF, 68164369AA, 68164369AB, 68164369AC, 68164369AD, 68164369AE, and 68164369AF.
Frequently Asked Questions
Do I need to do any programming after I install this ECM?
No. This unit comes fully programmed to your vehicle’s VIN. It is a plug-and-play installation. Once you connect the battery and plug in the module, you are ready to start the vehicle. In some cases, a throttle body relearn procedure may be needed, which can be done without special tools.
How do I provide my VIN and mileage?
After placing your order, you will be prompted to provide your vehicle’s information. It is critical that you provide the correct 17-digit VIN to ensure the programming is accurate for your specific vehicle.
Is this compatible with my 2013 Chrysler Town & Country?
Yes, this ECM is fully compatible with both the 2013 Dodge Grand Caravan and the 2013 Chrysler Town & Country, as long as your vehicle is equipped with the 3.6L engine.
What if I have an anti-theft or immobilizer system?
Our programming process includes flashing the security information from your VIN. This ensures the new ECM communicates correctly with your vehicle’s existing anti-theft system, allowing the car to start and run without any security lockout issues.
Where is the ECM located on my 2013 Caravan?
On the 2013 Dodge Caravan and Chrysler Town & Country, the ECM is typically located in the engine bay, mounted to the front of the driver’s side shock tower, near the battery and fuse box.