Is Your 2013 Chrysler 200 or Dodge Avenger Running Rough?
If you’re experiencing frustrating engine problems with your 2013 Chrysler 200 or Dodge Avenger, a failing Engine Control Module (ECM) could be the culprit. The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to transmission shifts and emissions. When it starts to fail, it can cause a cascade of issues that can be difficult to diagnose and leave your car unreliable or even undrivable. This replacement engine computer, part number 68164368AA, is the definitive solution to restore your vehicle’s performance and reliability.
From the Diagnostic Bay
We had a 2013 Dodge Avenger come into the shop last month with a complaint of intermittent stalling and a check engine light that would come and go. The owner had already replaced the spark plugs and a coil pack with no improvement. Our initial scan pulled codes for multiple sensor circuits and a random misfire. Instead of just chasing parts, we checked the power and ground signals to the ECM and found they were solid. However, monitoring the 5-volt reference signal from the ECM to the sensors showed it was dropping out intermittently. This pointed directly to an internal failure in the main computer. We installed one of these pre-programmed units, and the car ran perfectly. The VIN-specific programming meant no trip to the dealer was needed, saving the customer both time and significant expense.
Common Symptoms of a Failing ECM
A faulty engine computer can manifest in numerous ways. If you’re noticing any of the following issues with your 2.4L engine, it’s time to consider a replacement 2013 Chrysler 200 ECM.
- âś” Check Engine Light is on with various, often unrelated, trouble codes.
- âś” The engine cranks but refuses to start.
- âś” Poor fuel economy and a noticeable drop in power.
- âś” Rough idling, stalling, or hesitation during acceleration.
- âś” Harsh or erratic shifting from the 6-speed automatic transmission.
- âś” Communication errors with diagnostic scan tools.
- âś” Intermittent issues that seem to have no logical cause.
The Plug-and-Play Solution for Your Vehicle
Don’t let a complex computer repair keep you off the road. This isn’t just a generic part off a shelf; it’s a complete, ready-to-install solution. We take the guesswork and additional cost out of the equation by programming the module specifically for your car before it ships. Simply provide us with your vehicle’s VIN and current mileage during checkout, and we handle the rest. The unit you receive will be fully flashed with the latest factory software and your vehicle’s specific data. This means:
- No Dealer Programming Needed: Save hundreds of dollars and the hassle of a dealership visit.
- True Plug-and-Play Installation: Disconnect the battery, swap the old module with your new one, reconnect the battery, and start your car. It’s that simple.
- Guaranteed Compatibility: This module is a direct replacement for a wide range of part numbers, ensuring a perfect match for your vehicle’s original equipment.
Compatible Part Numbers and Fitment
This 2013 Chrysler 200 ECM is a direct replacement for the following Mopar and Chrysler part numbers: 04606838AB, 04606838AC, 05094956AA, 05094956AB, 05094956AC, 05094956AE, 68164368AA, 68164368AB, 68164368AC, 68164368AD, 68164368AE, 68164367, 68164366, 68164365, and 68164364.
This part is confirmed to fit:
- 2013 Chrysler 200 with 2.4L Engine & 6-Speed Automatic Transmission
- 2013 Dodge Avenger with 2.4L Engine & 6-Speed Automatic Transmission
Ordering the correct 2013 Chrysler 200 ECM is crucial for resolving your vehicle’s issues. Restore the smooth operation and dependability you expect from your car with this pre-programmed, high-quality engine computer.
Frequently Asked Questions
Do I need to have this ECM programmed by a dealer?
No. This engine computer comes fully programmed to your vehicle’s specific VIN and mileage. It is a true plug-and-play unit, requiring no additional programming or flashing from a dealer or mechanic.
What information do you need from me to program it?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically provide this information during the checkout process or by contacting us after placing your order.
Is this a difficult part to install myself?
For someone with basic mechanical skills, the installation is straightforward. It typically involves disconnecting the vehicle’s battery, locating and unplugging the old ECM, unbolting it, and then installing the new one in its place. Always disconnect the battery before starting the job.
Will this fix my car’s specific problem?
This ECM will correct issues directly caused by a faulty engine computer. While the symptoms listed are common indicators of ECM failure, it’s always best to have a proper diagnosis performed to rule out other potential causes like faulty sensors, wiring, or mechanical problems.
What is the warranty on this part?
This part comes with a comprehensive warranty that covers any defects in the module itself. Please refer to the warranty section on our website for specific terms and duration.