Restore Peak Performance to Your 2.4L Engine
Is your 2013 Chrysler 200 or Dodge Avenger suffering from frustrating and unpredictable engine problems? Issues like a persistent Check Engine Light, sudden stalling, rough idling, or a noticeable drop in fuel efficiency often point directly to a failing Engine Control Module (ECM). The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it begins to fail, it can cause a cascade of problems that are difficult to diagnose and can leave your vehicle unreliable.
This replacement Engine Control Module is the definitive solution for getting your vehicle back on the road quickly and confidently. It arrives at your door fully programmed to your vehicle’s specific VIN and mileage. This means there is no need for expensive trips to the dealership for coding or flashing. It’s a true plug-and-play component designed for a straightforward installation, allowing you to restore your car’s original performance and reliability without hassle.
From the Diagnostic Bay
We had a 2013 Dodge Avenger come into the shop that was a real head-scratcher for the owner. He had replaced the spark plugs, ignition coils, and even the crankshaft position sensor trying to chase down an intermittent stalling issue and a P0606 code (ECM Processor Fault). The car would run fine for days, then suddenly die at a stoplight. After confirming all sensor inputs were good, we focused on the ECM. Once we installed a pre-programmed module just like this one, the stalling vanished, the code cleared, and the car ran perfectly. It’s a classic case where chasing individual symptoms can be costly, while addressing the root cause—the failing computer—provides a lasting fix.
Is Your Chrysler 200 or Avenger Exhibiting These Symptoms?
- ✔ Persistent Check Engine Light that won’t clear
- ✔ Error codes related to internal processor failure (e.g., P0601, P0606)
- ✔ Intermittent stalling or engine shutting off while driving
- ✔ Rough or erratic idling
- ✔ Noticeable decrease in fuel economy
- ✔ Hesitation or stumbling during acceleration
- ✔ Difficulty starting the engine, or a no-start condition
- ✔ Automatic transmission shifting harshly or at the wrong times
The Plug-and-Play Advantage for Your 2013 Chrysler 200 ECM
The biggest hurdle in replacing a modern vehicle computer is the complex programming required to sync it with your car’s security system and other modules. Our service eliminates this completely. We handle all the necessary programming using your vehicle’s VIN before the part is shipped. When you receive your 2013 Chrysler 200 ECM, the process is as simple as disconnecting the battery, swapping the old module for the new one, and reconnecting the battery. No specialized tools, no software, and no dealership appointments are necessary. This saves you significant time and money, turning a potentially complicated repair into a manageable DIY task.
Guaranteed Compatibility
This module is a direct replacement for a range of part numbers, ensuring a perfect fit and function for your vehicle. Please verify that your original part number is on the list below to guarantee compatibility.
This part is a direct fit for the following vehicles:
- 2013 Chrysler 200 with 2.4L Engine & 6-Speed Automatic Transmission
- 2013 Dodge Avenger with 2.4L Engine & 6-Speed Automatic Transmission
Compatible Part Numbers: 04606838AB, 04606838AC, 05094956AA, 05094956AB, 05094956AC, 05094956AE, 68164368AA, 68164368AB, 68164368AC, 68164368AD, 68164368AE, 68164367, 68164366, 68164365, 68164364
Frequently Asked Questions
What information do you need to program the ECM?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. The VIN is essential to load the correct software and security information for your specific car. You can typically find the VIN on your driver’s side dashboard (visible through the windshield) or on the driver’s side door jamb sticker.
Is this ECM really “plug and play”?
Yes, absolutely. “Plug and play” means the unit arrives fully programmed and requires no additional work after installation. Once you connect it, your vehicle will recognize it and start and run as it should, with the immobilizer and all other systems functioning correctly.
Will this fix my car’s check engine light?
If the check engine light is caused by a faulty ECM (indicated by codes like P0601, P0606, or other internal processor faults), then this replacement module will resolve the issue. However, if the light is on due to a separate failed component like an oxygen sensor or a catalytic converter, those parts will still need to be addressed.
How difficult is the installation?
For most DIYers with basic tools, the installation is straightforward. It typically involves disconnecting the vehicle’s battery, locating the old ECM in the engine bay, unplugging the electrical connectors, unbolting the module, and then reversing the process with the new one. The entire process can often be completed in under an hour.
How do I find my original part number?
The part number is printed on a sticker on the housing of your current ECM. You will need to locate the module in your engine bay and read the number directly from the label to ensure you are ordering the correct compatible part.
Does this part also fit the 2013 Dodge Avenger?
Yes, this ECM is compatible with both the 2013 Chrysler 200 and the 2013 Dodge Avenger, as long as the vehicle is equipped with the 2.4L engine and the 6-speed automatic transmission.