Is Your 2013 Avenger or 200 Running Rough?
If your 2013 Dodge Avenger or Chrysler 200 is experiencing frustrating issues like stalling, erratic idling, a persistent check engine light, or a complete no-start condition, a failing Engine Control Module (ECM) is a very likely culprit. The ECM is the brain of your vehicle, managing everything from fuel injection and ignition timing to transmission shifts. When it starts to fail, the symptoms can be widespread and confusing. This replacement engine computer is the definitive solution to restore your vehicle’s performance and reliability, arriving at your door fully programmed and ready for a simple, plug-and-play installation.
From the Diagnostic Bay
We had a 2013 Avenger come into the shop with classic signs of a bad ECM: it would crank but not start, and when it did, it ran terribly for a few seconds before stalling. The owner had already replaced the spark plugs and a coil pack with no success. After hooking up our diagnostic scanner, we found a ‘No Communication with ECM’ error. Before condemning the module, we did our due diligence and checked the main power and ground circuits to the computer. Everything was solid. This confirmed our suspicion: the internal processor of the ECM had failed. We installed one of our pre-programmed units, and the car fired up on the first try and idled perfectly. It’s a reminder that while you should always check the basics, sometimes the core component is indeed the problem.
Symptoms of a Failing Engine Computer
- ✔ Persistent Check Engine Light (CEL) with communication-related or internal processor fault codes.
- ✔ Engine cranks but refuses to start.
- ✔ Stalling, stumbling, or hesitation during acceleration.
- ✔ Noticeable decrease in fuel economy.
- ✔ Rough or erratic idling.
- ✔ Harsh or incorrect shifting from the 4-speed automatic transmission.
- ✔ Intermittent electrical issues or warning lights on the dashboard.
The Plug-and-Play Advantage for Your 2013 Avenger Engine Computer
The biggest hurdle in replacing a modern vehicle’s computer is the complex programming required to sync it with your car’s specific Vehicle Identification Number (VIN) and security systems. Our process eliminates this completely. We handle all the programming for you before the part is shipped. Using the VIN you provide at checkout, we flash the module with your vehicle’s exact factory software and security information. This means no expensive trips to the dealership, no special tools, and no additional programming fees. It’s designed for a straightforward installation that you or your trusted mechanic can perform in minutes.
Guaranteed Compatibility
This ECM is a direct replacement for 2013 Dodge Avenger and Chrysler 200 models equipped with the 2.4L engine and 4-speed automatic transmission. It is compatible with a wide range of original part numbers, ensuring a perfect match for your vehicle. Please verify your original part number against the list below:
Compatible Part Numbers: 04606838AB, 04606838AC, 05187067AA, 05187067AB, 05187067AC, 05187067AE, 05187066AA, 05187066AB, 05187066AC, 05187066AD, 05187066AE, 05187065AA, 05187065AB, 05187065AC, 05187064AA, 05187064AB, 05187064AC, 05187064AD, 05187064AE, 05187008AB, 05187008AC, 05187008AD, 05187008AE
Don’t let a faulty module keep your car off the road. This pre-programmed 2013 Avenger Engine Computer is the fastest and most reliable way to solve your engine management problems and get back to driving with confidence.
Frequently Asked Questions
Is this engine computer truly plug-and-play?
Yes. We program the unit with your vehicle’s specific VIN and mileage before shipping. This ensures it communicates correctly with all other modules in your car, requiring no further programming or dealer intervention. Simply install it, connect the battery, and start your vehicle.
What information do I need to provide?
During the checkout process, you will need to provide your vehicle’s 17-digit VIN (Vehicle Identification Number) and current mileage. This is crucial for us to program the module correctly for your specific car.
How can I be sure my original ECM is the problem?
The symptoms listed above are strong indicators of a failing ECM. However, we always recommend a thorough diagnosis by a qualified mechanic. Issues with wiring, sensors, or power grounds can sometimes mimic ECM failure. Confirming the diagnosis can save you time and money.
Will this fix my check engine light?
If the check engine light is on due to an internal fault within the original ECM, this replacement will resolve the issue. If the light is caused by another failing component on the vehicle (like an oxygen sensor or catalytic converter), the light may return, and that component will also need to be addressed.
What’s the difference between an ECM, ECU, and PCM?
The terms are often used interchangeably. ECM stands for Engine Control Module, and ECU for Electronic Control Module. PCM, or Powertrain Control Module, is a term for a module that controls both the engine and the transmission. For this specific 2013 Avenger, this module functions as the core brain for the powertrain.