Is Your Dodge Journey or Chrysler Sebring Running Rough?
If your 2009-2010 Dodge Journey, Avenger, or Chrysler Sebring with the 2.4L engine is experiencing frustrating issues like a persistent check engine light, stalling, rough idling, or a complete no-start condition, a failing Engine Control Module (ECM) is a very likely culprit. The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and spark timing to transmission shifting. When it fails, it can cause a wide range of confusing and debilitating problems. Don’t let a faulty computer keep your vehicle off the road. This direct replacement engine computer is the reliable, straightforward solution you need.
From the Diagnostic Bay
We had a 2010 Dodge Journey come into the shop that was driving the owner crazy. It would run fine for a few days, then suddenly start stalling at red lights and throwing a P0606 (ECM/PCM Processor Fault) code. We checked all the wiring and sensors, which all tested good. The intermittent nature of the problem pointed directly to an internal failure in the engine computer. We installed one of our pre-programmed units, keyed to the customer’s VIN, and the problem was solved instantly. The Journey ran smoothly, the code never returned, and the customer was back on the road with confidence the same day.
Common Symptoms of a Failing 2.4L Engine Computer
- âś” Persistent Check Engine Light (CEL) with codes related to the PCM or sensor circuits.
- âś” Engine stalling or shutting off unexpectedly while driving.
- âś” Rough or erratic idling and poor engine performance.
- âś” A significant drop in fuel economy for no apparent reason.
- âś” Difficulty starting the engine or a complete no-start condition.
- âś” Transmission shifting problems or getting stuck in ‘limp mode’.
- âś” Communication errors with diagnostic scan tools.
Why Choose Our 2009-2010 Journey Engine Computer?
Finding the right part is only half the battle. Our goal is to make the repair process as simple and painless as possible. This is not just a part in a box; it’s a complete solution. We handle the complex programming for you. Upon ordering, we will flash the module with your vehicle’s specific Vehicle Identification Number (VIN) and current mileage. This critical step ensures that the computer communicates perfectly with all the other modules in your vehicle, like the instrument cluster and anti-theft system. The result is a true Plug & Play installation. There is no need for an expensive trip to the dealership for additional programming. Simply install the module, connect the battery, and start your engine.
This unit is a direct replacement for a wide range of original part numbers, ensuring broad compatibility. Please verify your original part number against the list below to confirm fitment.
Compatible Part Numbers: 05150472AA, 05150518AA, 68046281AA, 68046281AB, 68046281AC, 68046281AD, 68046282AA, 68046282AB, 05187273AD, 68046282AC, 68046282AD, 05187273AA, 05187273AB, 05187273AC, 05187274AA, 05187274AD, 05187271AA, 05187272, 05187265, 05187266, 05187263, 05187267, 05187269, 05187270, 05187254, 05187255, 05187861, 05187251, 05187991, 05187252, 05187992, 05187250, 05187990, 05187237, 05187243, 05187236, 05187862, 05187239, 05187233, 05187240, 05187232, 05187238, 05187249
Frequently Asked Questions
Is this engine computer really “Plug & Play”?
Yes. We program the module with the VIN and mileage you provide during checkout. This ensures it integrates seamlessly with your vehicle’s existing systems, eliminating the need for any additional programming or dealer visits. Just install it and you’re ready to go.
What information do I need to provide for programming?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) to program the computer correctly. You can usually find this on your driver’s side dashboard (visible through the windshield), on the driver’s side door jamb sticker, or on your vehicle’s registration and insurance documents.
Will this fit my 2008 Dodge Avenger?
Yes, this ECM is compatible with several vehicles, including the 2008-2010 Dodge Avenger and 2008-2010 Chrysler Sebring, as long as they are equipped with the 2.4L engine. Please cross-reference your original module’s part number with our compatible list to ensure a perfect match.
What is the difference between an ECM, ECU, and PCM?
The terms are often used interchangeably. ECM stands for Engine Control Module, ECU for Engine Control Unit, and PCM for Powertrain Control Module. In most modern vehicles like your Journey, the PCM controls both the engine and the transmission, but many people still refer to it as the ECM or ECU. This part serves as your vehicle’s primary powertrain computer.
What if I install this part and my problem doesn’t go away?
While this ECM is a common solution for many engine-related issues, proper vehicle diagnostics are key. If the new module doesn’t solve the problem, it may indicate another issue, such as a faulty sensor, wiring problem, or a bad ground connection. We always recommend confirming the diagnosis before ordering.