Is Your Dodge Avenger, Sebring, or Journey Running Rough?
If you’re dealing with frustrating issues like a persistent check engine light, poor fuel economy, engine stalling, or a complete no-start condition, a failing Engine Control Module (ECM) is a very likely culprit. The ECM is the brain of your vehicle’s engine, managing everything from fuel injection and ignition timing to emissions controls. When it starts to fail, it can cause a cascade of problems that are often difficult to diagnose. Don’t let a faulty computer keep your car off the road. This direct-fit replacement engine computer is the reliable, cost-effective solution you need.
From the Diagnostic Bay
We had a 2009 Dodge Avenger come into the shop that was giving its owner fits. It would randomly stall at stoplights and sometimes wouldn’t start at all, but there were no consistent trouble codes pointing to a specific sensor. After checking all the usual suspects—fuel pump, crank sensor, wiring harnesses—we focused on the ECM. We connected a scan tool and noticed erratic data readings from multiple sensors simultaneously, a classic sign of an internal computer fault. We installed one of our pre-programmed ECMs, and the car fired right up and ran perfectly. The owner was thrilled to have his reliable daily driver back without an expensive trip to the dealer for programming.
Why Choose Our Pre-Programmed 2008-2010 Avenger ECM?
The biggest hurdle when replacing an ECM is the programming. Most replacement computers are sold ‘blank’ and require specialized, expensive tools at a dealership or high-end repair shop to flash them with your vehicle’s specific software. Our process eliminates that step entirely. We take your vehicle’s Vehicle Identification Number (VIN) and current mileage at checkout and program the module for you. When it arrives at your door, it’s a true Plug & Play solution. Simply disconnect the battery, swap the old module with the new one, reconnect the battery, and you’re ready to go. No additional programming, no key relearn procedures, no hidden fees.
Symptoms of a Failing Engine Computer
- âś” Check Engine Light is on or flashing
- âś” Engine stalling or misfiring unpredictably
- âś” Car won’t start, but the battery and starter are good
- âś” Noticeable decrease in fuel efficiency
- âś” Poor engine performance, hesitation, or rough idling
- âś” Automatic transmission shifting issues
- âś” Communication errors with diagnostic scan tools
Guaranteed Fitment and Compatibility
This ECM is a direct replacement for a wide range of part numbers, ensuring compatibility with your 2008, 2009, or 2010 Dodge Avenger, Dodge Journey, or Chrysler Sebring equipped with the 2.4L 4-cylinder engine. It is engineered to meet or exceed original equipment specifications for performance and reliability. Please verify your vehicle’s fitment using the list below and ensure one of the compatible part numbers matches your original unit.
This module is a direct replacement for the following part numbers: 05150472AA, 05150518AA, 68046281AA, 68046281AB, 68046281AC, 68046281AD, 68046282AA, 68046282AB, 05187273AD, 68046282AC, 68046282AD, 05187273AA, 05187273AB, 05187273AC, 05187274AA, 05187274AD, 05187271AA, 05187272, 05187265, 05187266, 05187263, 05187267, 05187269, 05187270, 05187254, 05187255, 05187861, 05187251, 05187991, 05187252, 05187992, 05187250, 05187990, 05187237, 05187243, 05187236, 05187862, 05187239, 05187233, 05187240, 05187232, 05187238, 05187249.
This part will fit these makes and models with these options:
- AVENGER 09-10 Electronic Control Module; 2.4L
- AVENGER 08 Electronic Control Module; 2.4L, ID 5187232AD
- AVENGER 08 Electronic Control Module; 2.4L, ID 5150472AA
- SEBRING 09-10 Electronic Control Module; 2.4L
- SEBRING 08 Electronic Control Module; 2.4L, ID 5187232AD
- SEBRING 08 Electronic Control Module; 2.4L, ID 5150472AA
- JOURNEY 09-10 Electronic Control Module; 2.4L
Frequently Asked Questions
Is this ECM really Plug and Play?
Yes, absolutely. We program the module using the VIN you provide during checkout. This ensures it has the correct software and security information for your specific vehicle. Once installed, no further programming is required.
Where do I provide my VIN?
You can enter your vehicle’s 17-digit VIN in the designated box on the checkout page. Please double-check it for accuracy, as the programming is based entirely on this number.
Do I need to have my keys reprogrammed?
No. Our programming process syncs the module to your vehicle’s existing immobilizer system, so your original keys will work without any additional steps.
Is this a difficult part to install myself?
For most DIY mechanics, this is a straightforward installation. The ECM is typically located in the engine bay and is held in place by a few bolts and has several electrical connectors. The most important step is to disconnect the vehicle’s battery before starting the job. If you are not comfortable working on your vehicle, we recommend professional installation.
What if my original part number isn’t on the list?
The list provided covers the most common part numbers for this application. If your part number is not listed, please contact us with your VIN and original part number. We can verify compatibility for you to ensure you receive the correct module.