Is Your 2006 Minivan Acting Up? It Could Be the Engine Computer.
If your 2006 Chrysler Town & Country or Dodge Caravan is experiencing perplexing issues like random stalling, a persistent check engine light, rough idling, or a complete failure to start, the root cause is often the Engine Control Module (ECM). As the central computer of your vehicle, the ECM is responsible for managing everything from fuel injection and ignition timing to transmission shifting and emissions control. When it begins to fail, it can create a cascade of problems that are frustrating and difficult to diagnose. Don’t let a faulty computer keep your reliable minivan off the road. This direct-fit replacement ECM is the solution you need to restore performance and peace of mind.
From the Diagnostic Bay
We had a 2006 Caravan come in on a tow truck. The owner said it would crank but never start, and he had already replaced the fuel pump and crank sensor with no luck. His local mechanic was stumped. When we connected our scanner, we couldn’t communicate with the engine module at all—a dead giveaway. We confirmed the ECM had power and ground, pointing to an internal failure. We installed one of our pre-programmed modules, and the van fired up on the first try. It’s a classic case where what seems like a complex mechanical issue is actually a straightforward computer problem.
Common Symptoms of a Failing 2006 Town & Country ECM
A failing engine computer can manifest in numerous ways. If you’re noticing any of the following issues, it’s a strong indicator that your ECM may need replacement:
- ✔ Check Engine Light: The light is on, and you may have codes related to module communication (like U-codes) or multiple, unrelated sensor failures.
- ✔ No-Start Condition: The engine cranks over but refuses to start, even with a good battery and fuel supply.
- ✔ Poor Engine Performance: You may experience rough running, hesitation during acceleration, reduced power, and a significant drop in fuel economy.
- ✔ Intermittent Stalling: The vehicle stalls for no apparent reason, either while driving or at idle, and may or may not restart immediately.
- ✔ Transmission Problems: The ECM also communicates with the transmission controller, so a faulty module can cause harsh shifting, getting stuck in gear, or other erratic transmission behavior.
- ✔ Cooling Fans Inoperative: The ECM controls the cooling fans. If they don’t turn on when the engine gets hot, it can lead to overheating.
The Plug-and-Play Solution for Your Minivan
Replacing an ECM used to mean a trip to the dealership for expensive and time-consuming programming. Our process eliminates that hassle. This 2006 Town & Country ECM arrives at your doorstep fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and mileage. This ensures that all factory settings, including anti-theft (SKIM) data, are correctly configured before it even ships. The result is a true plug-and-play installation.
Simply disconnect the battery, unbolt the old module located on the driver’s side (LH) fender, plug in the new one, and reconnect the battery. There is no need for specialized tools or a visit to the dealer. You can get your vehicle running correctly again in your own driveway.
Guaranteed Compatibility
This module is a direct replacement for a wide range of part numbers, ensuring a perfect match for your vehicle. It is compatible with 2006 Chrysler Town & Country and Dodge Caravan models equipped with either the 3.3L or 3.8L engine. Please verify that your original part number is on the list below to ensure proper fitment.
Compatible Part Numbers: 05094650AC, 05094650AD, 05187758AA, 05187758AB, 05187758AC, 05094658AA, 05094658AB, 05094658AC, 05094658AD, 05094658AE, 05094658AF, 05094675AA, 05094675AB, 05094675AC, 05094675AD, 05094675AE, 05094659AB, 05094659AC, 05094659AD, 05094659AE, 05187756AA, 05187756AB, 0518775.
Frequently Asked Questions
Do I need to have this ECM programmed by a dealer?
No. This module comes pre-programmed to your vehicle’s VIN and mileage. It is a 100% plug-and-play unit, so you can install it yourself without any additional programming or dealer visits.
Where is the ECM located on my 2006 Town & Country or Caravan?
The Electronic Control Module is located in the engine bay, on the driver’s side (LH) inner fender, near the battery.
How do I provide my VIN and mileage for programming?
After you place your order, you will be prompted to provide your vehicle’s VIN and current mileage. We cannot ship the module until we have this information to ensure it is programmed correctly for your specific vehicle.
Will this fix my check engine light?
If the check engine light is caused by an internal failure of the original ECM, then yes, this replacement module will resolve the issue. However, it’s important to ensure that any codes are not being caused by other faulty components like sensors or wiring before ordering.
Is this compatible with both the 3.3L and 3.8L engines?
Yes, this engine computer is compatible with 2006 Dodge Caravan and Chrysler Town & Country models equipped with either the 3.3L or 3.8L engine. Our programming process tailors it to your specific vehicle configuration based on your VIN.