Restore Peak Performance to Your Minivan
Is your 2006 Chrysler Town & Country or Dodge Caravan suffering from frustrating issues like a persistent check engine light, poor fuel economy, rough idling, or even a no-start condition? These are classic signs of a failing Engine Control Module (ECM). The ECM is the brain of your vehicle, managing everything from fuel injection and ignition timing to transmission shifting. When it fails, the entire system is compromised. This replacement Engine Control Module, part number 05094659AE, is the definitive solution to get your minivan back on the road, running like it should.
From the Diagnostic Bay
We had a 2006 Town & Country come into the shop that was giving its owner fits. The van would randomly stall at stoplights, and the transmission would occasionally shift erratically. The owner had already replaced the spark plugs, ignition coil, and a few sensors, but the problem persisted. After hooking up our diagnostic scanner, we noticed communication dropouts with the main computer. We confirmed the wiring was solid, which pointed directly to an internal failure in the original ECM. After installing one of our pre-programmed modules, the van ran perfectly. The random stalling vanished, and the shifting became smooth and predictable. It’s a common story for these vehicles, and a new ECM is often the final, correct fix.
Is Your Minivan Showing These Symptoms?
A failing engine computer can manifest in numerous ways. If you’re experiencing any of the following, it’s highly likely that your ECM is the culprit. This part is designed to solve these exact problems.
- ✔ Persistent Check Engine Light (CEL) with various codes
- ✔ Engine stalling or shutting off unexpectedly
- ✔ Rough or unstable idle
- ✔ Noticeable decrease in fuel efficiency
- ✔ Hesitation or stumbling during acceleration
- ✔ Difficulty starting the engine or a complete no-start condition
- ✔ Harsh or erratic automatic transmission shifting
- ✔ Communication errors with diagnostic scan tools
The Plug & Play Solution for Your 2006 Town & Country ECM
The biggest hurdle in replacing an engine computer has always been the expensive and time-consuming programming required at a dealership. We eliminate that step entirely. This 2006 Town & Country ECM arrives at your door fully programmed to your vehicle’s specific Vehicle Identification Number (VIN) and mileage. This means there is no need for additional flashing or calibration. It’s a true Plug & Play solution. You simply disconnect the battery, swap the old module with this new one, reconnect the battery, and you’re done. You save hundreds of dollars in dealership labor and programming fees.
This module is a direct replacement for a wide range of original part numbers, ensuring broad compatibility. If your original module carries any of the following numbers, this unit is the correct replacement for you: 05094650AC, 05094650AD, 05187758AA, 05187758AB, 05187758AC, 05094658AA, 05094658AB, 05094658AC, 05094658AD, 05094658AE, 05094658AF, 05094675AA, 05094675AB, 05094675AC, 05094675AD, 05094675AE, 05094659AB, 05094659AC, 05094659AD, 05094659AE, 05187756AA, and more. By providing your VIN at checkout, we ensure the software loaded onto the module is a perfect match for your vehicle’s factory settings and features.
Don’t let a faulty computer keep your reliable minivan off the road. This is the most straightforward and cost-effective way to restore its engine management system to factory specifications. Order your pre-programmed 2006 Town & Country ECM today and solve those persistent engine problems for good.
Frequently Asked Questions
Do I need to get this ECM programmed by a dealer?
Absolutely not. This unit comes fully programmed to your specific vehicle using the VIN you provide during checkout. It is a 100% Plug & Play solution, ready for installation right out of the box.
Where is the ECM located on my 2006 Town & Country or Caravan?
The Electronic Control Module (ECM) is located in the engine bay, on the driver’s side (LH) fender, near the battery and fuse box.
What information do you need from me to program the module?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This ensures we can program the module to match your vehicle’s exact configuration and keep your odometer reading accurate.
Will this fix my check engine light?
If the check engine light is on due to an internal fault within the ECM itself, then yes, this part will resolve the issue. However, if the light is on because of a faulty sensor or other component elsewhere in the vehicle, you will still need to address that separate issue.
Is this part compatible with my 2006 Dodge Caravan?
Yes, this ECM is fully compatible with the 2006 Dodge Caravan equipped with either the 3.3L or 3.8L engine, as well as the 2006 Chrysler Town & Country with the same engine options.