Is Your Chrysler Sebring or Dodge Avenger Experiencing Engine Problems?
If your 2007-2008 Chrysler Sebring or 2008 Dodge Avenger is suffering from issues like a persistent check engine light, stalling, rough idling, or a complete no-start condition, the root cause is often a failing Engine Control Module (ECM). The ECM is the central computer of your vehicle, responsible for managing everything from fuel injection and ignition timing to emissions and transmission shifting. When it begins to fail, it can create a cascade of frustrating and difficult-to-diagnose problems. Don’t let a faulty computer keep your car off the road. This direct-replacement ECM is the reliable, hassle-free solution you need.
The Plug-and-Play Solution for a Fast Repair
The biggest challenge when replacing an ECM is the complex programming required to sync it with your vehicle’s specific systems, including the anti-theft immobilizer. A trip to the dealership for this service can be both costly and time-consuming. We eliminate that step completely. Before this unit ships, we program it with your vehicle’s unique Vehicle Identification Number (VIN) and current mileage. This ensures that when it arrives, it is 100% plug-and-play. Simply disconnect the old module, connect this one, and you’re ready to go. No additional programming, no special tools, and no expensive dealer visits are necessary.
From the Diagnostic Bay
We once had a 2008 Dodge Avenger come into the shop that had its owner completely stumped. The car would randomly stall at red lights and occasionally refuse to start. The owner had already replaced the crankshaft position sensor, camshaft position sensor, and even the fuel pump based on various forum suggestions, spending hundreds of dollars with no success. After connecting our diagnostic scanner, we noticed intermittent communication loss with the ECM (a classic U0100 code). We swapped in a pre-programmed ECM, and the car fired up instantly and ran perfectly. It’s a tough lesson, but sometimes the ‘brain’ is the problem, not the ‘senses’. This highlights the importance of considering the ECM when multiple, unrelated electronic issues appear simultaneously.
Symptoms of a Failing 2007-2008 Sebring Engine Computer
- ✔ Persistent Check Engine Light (CEL) that won’t clear
- ✔ Engine stalling or shutting off unexpectedly while driving
- ✔ No-start or crank-no-start conditions
- ✔ Rough or erratic engine idle
- ✔ Noticeable decrease in fuel economy
- ✔ Poor engine performance, hesitation, or misfires
- ✔ Harsh or incorrect automatic transmission shifting
- ✔ Communication error codes with diagnostic scanners
Guaranteed Fitment and Compatibility
This Electronic Control Module is a direct replacement for a range of vehicles and part numbers, ensuring a perfect match for your car. Please verify your vehicle and part number before ordering.
Fits Models:
- 2007-2008 Chrysler Sebring (with 2.7L or 3.5L engine)
- 2008 Dodge Avenger (with 2.7L or 3.5L engine)
Replaces Part Numbers: 05033708AD, 05033708AE, 05033707AJ, 05033708AF, 05094721AA, 05094721AB, 05094721AC, 05094721AE, 05094721AG, 05094721AH, 05094721AI, 05094721AJ, 05094721AK, 05094721AL, 05094721AM, 05094721AN, 05150157AH, 05094721AO, 05094858AA, 05094858AC, 05094858AD, 05094858AE, 05094858AF, 05187343AF, 05150245AC
Frequently Asked Questions
Is this part truly plug and play?
Yes, absolutely. We flash the module with the VIN and mileage you provide during checkout. This process ensures the computer is fully synchronized with your vehicle’s factory settings, including the security system. When it arrives, you can install it without any further programming.
What information do you need from me?
To ensure proper programming, we require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically find the VIN on your dashboard (visible through the windshield) or on the driver’s side door jamb sticker.
Where is the ECM located on my 2007-2008 Sebring?
On the 2007-2008 Chrysler Sebring and Dodge Avenger, the ECM is typically located in the engine bay. Look for it mounted to the firewall or on one of the inner fender wells, often near the battery or the air filter housing. It is a metal box with several large electrical connectors.
Do I need any special tools for installation?
No special tools are required. Basic hand tools, such as a socket set and a screwdriver, are usually all that’s needed to access and replace the module. The most important step is to disconnect the vehicle’s battery before you begin to prevent any electrical damage.
Will this fix my specific check engine light codes?
This ECM will resolve issues directly caused by a faulty computer, including many communication codes (like U-series codes) and internal processor fault codes. However, if your check engine light is on due to a bad sensor (like an O2 sensor or knock sensor), you will still need to replace that sensor. A faulty ECM is often the culprit when multiple, seemingly unrelated codes appear at once.