Is Your 2006 Caravan or Town & Country Running Rough?
If you’re experiencing frustrating issues like stalling, a persistent check engine light, or a complete no-start condition in your 2006 Dodge Caravan or Chrysler Town & Country, a failing Engine Control Module (ECM) is a very likely culprit. The ECM is the central computer of your vehicle, managing everything from fuel injection and ignition timing to transmission shifting. When it starts to fail, it can cause a cascade of problems that are often difficult to diagnose. Don’t let a faulty computer keep your reliable minivan off the road. This direct-replacement 2006 Caravan ECM is your plug-and-play solution to restore your vehicle’s performance and dependability.
From the Diagnostic Bay
We recently had a 2006 Town & Country towed in that had its owner completely stumped. He had replaced the spark plugs, ignition coil, and even the crankshaft position sensor trying to solve an intermittent stalling and rough idle issue. The check engine light would come on and off with vague codes. After hooking up our advanced scanner, we noticed the live data from the sensors was erratic, but the sensors themselves tested fine. This pointed directly to the brain of the operation—the ECM. The internal processors were failing, corrupting the signals. Once we installed a pre-programmed ECM matched to his VIN, the van started instantly and idled perfectly. It’s a classic case where chasing sensors costs more time and money than addressing the root cause.
Common Symptoms of a Failing 2006 Caravan ECM
- ✔ Persistent and illuminated Check Engine Light (CEL)
- ✔ Engine stalling or shutting off unexpectedly while driving
- ✔ Difficulty starting the engine or a complete no-start condition
- ✔ Noticeable decrease in fuel economy
- ✔ Rough or erratic engine idling
- ✔ Hesitation or stumbling during acceleration
- ✔ Harsh or incorrect automatic transmission shifting
- ✔ Communication errors with diagnostic scan tools
The Plug-and-Play Solution
Taking your vehicle to a dealership for an ECM replacement can be a costly and time-consuming process. They often require multiple appointments for diagnosis, ordering the part, and then a lengthy programming session. We eliminate that hassle. This Engine Control Module comes fully programmed specifically for your vehicle. Simply provide us with your vehicle’s Vehicle Identification Number (VIN) and current mileage during checkout, and we handle the rest. The module you receive will be ready for immediate installation, with no additional programming or flashing required. It’s a true plug-and-play fix that you can often install yourself in under an hour.
Installation is Straightforward
The ECM on the 2006 Caravan and Town & Country is conveniently located on the driver’s side (LH) fender in the engine bay. The process is as simple as disconnecting the battery, unplugging the electrical connectors from the old module, unbolting it from the fender, and then installing the new one in the reverse order. Once the new module is connected and the battery is reconnected, your vehicle will be ready to start, synced with all its original settings and security information.
Guaranteed Compatibility
This module is a direct replacement for a wide range of original part numbers, ensuring a perfect match for your vehicle. It is compatible with 2006 Dodge Caravan and Chrysler Town & Country models equipped with either the 3.3L or 3.8L engine. It directly replaces the following part numbers: 05094650AC, 05094650AD, 05187758AA, 05187758AB, 05187758AC, 05094658AA, 05094658AB, 05094658AC, 05094658AD, 05094658AE, 05094658AF, 05094675AA, 05094675AB, 05094675AC, 05094675AD, 05094675AE, 05094659AB, 05094659AC, 05094659AD, 05094659AE, 05187756AA, 05187756AB, and 0518775.
Frequently Asked Questions
Will I need to program this ECM after I receive it?
No. This ECM is a complete plug-and-play solution. We program it to your vehicle’s specific VIN and mileage before it ships, so it’s ready for immediate installation without any need for a trip to the dealer or a mechanic with special tools.
Where is the ECM located on my 2006 Dodge Caravan?
The Engine Control Module is located in the engine bay, mounted to the driver’s side (LH) fender wall. It is a silver metal box with several large electrical connectors.
What information do you need from me to program the module?
To ensure perfect compatibility, we require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. You can typically find the VIN on your dashboard (visible through the windshield) or on the driver’s side door jamb sticker.
Is this part compatible with my 2006 Chrysler Town & Country with a 3.8L engine?
Yes, absolutely. This ECM is fully compatible with both the 2006 Dodge Caravan and the 2006 Chrysler Town & Country, for models equipped with either the 3.3L or 3.8L V6 engine.
Could other issues cause the same symptoms as a bad ECM?
While the symptoms listed are very common for a failing ECM, other issues like a bad sensor, wiring problems, or fuel delivery issues can sometimes present similarly. It is always a good practice to have a proper diagnosis performed by a qualified mechanic to confirm the ECM is the root cause before ordering.