Is Your 2008 Dodge Avenger or Sebring Experiencing Critical Engine Problems?
Dealing with a vehicle that won’t start, stalls unexpectedly, or has a persistent Check Engine Light can be incredibly frustrating. These aren’t just minor inconveniences; they are often symptoms of a failing Engine Control Module (ECM), the central computer that manages your vehicle’s engine performance, fuel economy, and emissions. When the ECM begins to fail in your 2008 Dodge Avenger or 2007-2008 Sebring, you’ll notice a significant decline in drivability and reliability. Our pre-programmed ECM is the definitive solution to restore your vehicle’s original performance and get you back on the road with confidence.
From the Diagnostic Bay
We had a 2008 Avenger come into the shop with a classic complaint: intermittent stalling at stoplights and a P0606 (Internal Control Module Processor Error) code that would come and go. The owner had already spent hundreds replacing the crankshaft and camshaft position sensors, thinking they were the cause. After hooking up our diagnostic scanner and monitoring live data, we saw erratic voltage readings originating from the ECM itself. It was a clear case of internal failure. We installed one of our pre-programmed modules, and the car ran perfectly. It’s a common scenario where chasing sensor codes leads to a dead end, when the real culprit is the brain of the operation: the engine computer.
Common Symptoms of a Failing ECM
- ✔ Persistent Check Engine Light (CEL) that won’t clear or returns immediately.
- ✔ Engine stalling, stumbling, or hesitating during acceleration.
- ✔ Complete no-start condition where the engine cranks but won’t fire up.
- ✔ A noticeable decrease in fuel economy for no apparent reason.
- ✔ Misfire codes (P0300-P0306) even after replacing spark plugs and coils.
- ✔ Communication errors with diagnostic scan tools.
- ✔ Erratic automatic transmission shifting or gear selection problems.
- ✔ Issues with other electronic systems, as the ECM communicates with multiple modules.
The Simple, Plug-and-Play Solution
Forget about expensive dealership visits, towing fees, and the headache of programming a new module. This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take care of all the complex programming for you. Simply provide us with your vehicle’s Vehicle Identification Number (VIN) and current mileage during checkout, and we will flash the unit with your car’s specific software. When it arrives, the installation is straightforward: disconnect the battery, swap the old module with the new one, reconnect the battery, and start your car. It’s a true Plug-and-Play experience, designed to save you time and money.
Why Choose Our 2008 Avenger Engine Computer?
When you’re dealing with a critical component like the ECM, you need a part you can trust. Our modules are meticulously inspected and programmed to meet or exceed original factory specifications. We ensure that every unit is loaded with the latest Chrysler-approved software for your 2008 Avenger or Sebring, addressing any known bugs or drivability issues from the original programming. This attention to detail ensures optimal engine performance, fuel efficiency, and emissions control. By choosing our **2008 Avenger Engine Computer**, you are getting a reliable, cost-effective solution that eliminates the guesswork and gets the job done right the first time.
Guaranteed Compatibility
This ECM is a direct fit for the following vehicles and engine configurations:
- 2008 Dodge Avenger with 2.7L or 3.5L engine
- 2007-2008 Chrysler Sebring with 2.7L or 3.5L engine
It is fully compatible and interchangeable with the following part numbers:
05033708AD, 05033708AE, 05033707AJ, 05033708AF, 05094721AA, 05094721AB, 05094721AC, 05094721AE, 05094721AG, 05094721AH, 05094721AI, 05094721AJ, 05094721AK, 05094721AL, 05094721AM, 05094721AN, 05150157AH, 05094721AO, 05094858AA, 05094858AC, 05094858AD, 05094858AE, 05094858AF, 05187343AF, 05150245AC
Frequently Asked Questions
Do I need to do any programming after I receive this part?
No. This module is a complete Plug-and-Play solution. We program it to your vehicle’s specific VIN and mileage before it ships. You will not need to visit a dealer or mechanic for additional programming.
Where do I provide my VIN and mileage?
You can provide your vehicle’s VIN and current mileage during the checkout process. There will be a designated field for this information. Accurate information is crucial for correct programming.
Is this difficult to install myself?
For someone with basic mechanical skills, the installation is straightforward. It typically involves disconnecting the vehicle’s battery, locating and unplugging the old ECM, removing it, and installing the new one in its place. However, if you are not comfortable working on your vehicle, we always recommend professional installation.
Will this fix my specific problem?
This ECM will resolve issues directly caused by a faulty engine computer. While the symptoms listed are common indicators of ECM failure, we always recommend a proper diagnosis by a qualified mechanic to confirm the ECM is the root cause before ordering.
Do I need to send my old part back?
Please check the product page or your order confirmation for information regarding a core charge or return. In many cases, returning the old unit is not required, but policies can vary.