Is Your 2011 Chrysler 200 or Dodge Avenger Running Rough?
If you’re experiencing frustrating issues like a persistent check engine light, poor fuel economy, erratic engine performance, or even a no-start condition, the problem might be a failing Engine Control Module (ECM). The ECM is the brain of your vehicle’s engine, controlling critical functions like fuel injection, ignition timing, and transmission shifting. When it starts to fail, it can cause a cascade of problems that are often difficult to diagnose, leaving you stranded and facing expensive dealership repair bills.
Don’t let a faulty computer keep your car off the road. This is a direct-fit, reliable solution for your 2011 Chrysler 200 or Dodge Avenger equipped with the 2.4L engine and 6-speed automatic transmission. The best part? It arrives at your door fully programmed to your vehicle’s specific VIN and mileage. This means no expensive trips to the dealership for programming—it’s a true Plug & Play installation.
From the Diagnostic Bay
We had a 2011 Avenger come into the shop with a complaint of intermittent stalling and a check engine light for a random misfire. The owner had already replaced the spark plugs, ignition coils, and even the crankshaft position sensor based on advice from forums, but the problem persisted. After hooking up our advanced scanner, we noticed the live data for the fuel injectors was behaving erratically. Instead of immediately replacing the injectors, we checked the command signals from the ECM. Sure enough, the ECM was intermittently failing to send the correct signals, causing the misfire and stalling. A new, programmed ECM like this one solved the problem instantly, saving the customer from spending hundreds more on parts they didn’t need.
Common Symptoms of a Failing 2011 Chrysler 200 ECM
A failing engine computer can manifest in various ways. If you’re noticing any of the following issues, your ECM could be the culprit. Look for these common warning signs:
- ✔ Check Engine Light is on with various, often inconsistent, trouble codes.
- ✔ Engine stalling or shutting off unexpectedly while driving.
- ✔ Difficulty starting the engine or a complete no-start condition.
- ✔ Noticeable decrease in fuel efficiency.
- ✔ Harsh or erratic shifting from the 6-speed automatic transmission.
- ✔ Misfires, rough idling, or poor acceleration.
- ✔ Communication errors with diagnostic scan tools.
The Plug & Play Solution You Need
The biggest hurdle in replacing an engine computer is the complex programming required to sync it with your vehicle’s anti-theft system and other modules. Our service eliminates this completely. We handle all the programming for you before we ship the part. Simply provide us with your vehicle’s VIN during checkout, and we’ll flash the module with your car’s exact software. When it arrives, you or your mechanic can install it in under an hour with basic hand tools. Just disconnect the battery, swap the modules, and reconnect the battery. It’s that simple.
This module is a direct replacement for a wide range of original part numbers, ensuring compatibility and proper function. It is built to meet or exceed original equipment specifications for reliability and performance.
This ECM is a direct fit for the following vehicles:
- 2011 Chrysler 200 with 2.4L Engine & 6-Speed Automatic Transmission
- 2011 Dodge Avenger with 2.4L Engine & 6-Speed Automatic Transmission
Compatible Part Numbers: 05150627AB, 68057006AA, 68057006AB, 68057006AC, 68057006AD, 68057006AE, 68057006AF, 68057006AG, 68057008AA, 68057008AB, 68057008AC, 68057008AD, 68057008AE, 68057008AF, 68057015AA, 68057015AB, 68057015AC, 68057015AD, 68057015AE, 68057015AF, 68057015AG, 68057015AH
Ordering this pre-programmed 2011 Chrysler 200 ECM is the most efficient and cost-effective way to restore your vehicle’s performance and get back to driving with confidence.
Frequently Asked Questions
Is this engine computer truly Plug & Play?
Yes, absolutely. We program the module using the VIN you provide during checkout. This ensures it has the correct software and security information for your specific vehicle. No further programming or dealer visit is required for installation.
Where is the ECM located on my 2011 Chrysler 200?
On the 2011 Chrysler 200 and Dodge Avenger, the ECM is typically located in the engine bay, mounted to the driver’s side inner fender well, near the battery and air filter housing. It’s a silver metal box with several large electrical connectors.
What information do you need from me to program it?
We only need your vehicle’s 17-digit Vehicle Identification Number (VIN). You can find this on your dashboard (visible through the windshield), on the driver’s side door jamb sticker, or on your vehicle’s registration and insurance documents.
Will this fix my transmission shifting problems?
In many cases, yes. The ECM works in conjunction with the Transmission Control Module (TCM) to control shift points and behavior. If the ECM is sending faulty data, it can cause poor shifting. Replacing a bad ECM often resolves these related transmission issues.
Do I need to perform a key relearn procedure after installation?
No. Because we program the module to your VIN, it will recognize your existing keys. The vehicle’s security system will function normally immediately after installation without any special procedures.
How can I be sure my original ECM is the problem?
While the symptoms listed are strong indicators, a definitive diagnosis is always recommended. This involves a professional mechanic using a scan tool to check for specific ECM-related fault codes (like P0600-P0606) and to verify that the ECM is communicating properly with other modules on the vehicle’s network.