Is Your 2011 Dodge Avenger or Chrysler 200 Running Rough?
If your 2011 Dodge Avenger or Chrysler 200 is experiencing frustrating issues like a persistent check engine light, erratic shifting, poor fuel economy, or even a no-start condition, the root cause is often a failing Engine Control Module (ECM). The ECM is the central computer of your vehicle, responsible for managing everything from the air-fuel mixture and ignition timing to the operation of the 6-speed automatic transmission. When it begins to fail, it can create a cascade of problems that are difficult to diagnose and can leave you stranded. Don’t let a faulty computer dictate your vehicle’s reliability. This direct-fit, pre-programmed engine computer is the definitive solution to restore your vehicle’s performance and get you back on the road with confidence.
From the Diagnostic Bay
We had a 2011 Avenger come into the shop with a classic complaint: intermittent stalling at stoplights and a check engine light with codes for multiple sensor failures – O2 sensor, throttle position sensor, and a random misfire. The owner had already replaced two of the sensors with no improvement. Our lead tech suspected the ECM from the start. On these vehicles, a failing processor or internal power supply in the module can send erratic voltage signals, making good sensors appear faulty. Instead of continuing to chase phantom sensor issues, we installed a correctly programmed ECM. The codes vanished, the stalling stopped, and the engine ran smoothly. It’s a textbook case of how a failing computer can mimic other problems, costing you time and money on unnecessary parts.
The Ultimate Plug & Play Solution for Your 2011 Avenger ECM
Replacing an ECM has historically been a complicated and expensive process, often requiring a trip to the dealership for costly programming. We’ve eliminated that step entirely. This Engine Control Module is not just a replacement part; it’s a complete, ready-to-install solution. When you place your order, we use the Vehicle Identification Number (VIN) you provide to flash the module with the exact factory software and calibrations for your specific vehicle. We also program your current mileage, ensuring seamless integration with the instrument cluster and other onboard systems. The result is a true Plug & Play experience. Simply disconnect the old module, connect this one, and you’re done. No special tools, no dealer visits, no additional programming required.
Common Symptoms of a Failing Engine Computer
- ✔ Persistent and illuminated Check Engine Light (CEL)
- ✔ Vehicle refuses to start or has difficulty starting
- ✔ Rough idling, stalling, or engine hesitation
- ✔ Noticeable decrease in fuel efficiency
- ✔ Harsh or erratic automatic transmission shifting
- ✔ Communication errors with diagnostic scan tools
- ✔ Engine misfires or loss of power during acceleration
- ✔ Inaccurate dashboard gauge readings
Guaranteed Compatibility and Fitment
This ECM is a direct replacement for your 2011 Dodge Avenger or 2011 Chrysler 200, specifically for models equipped with the 2.4L engine and a 6-speed automatic transmission. It is fully compatible with a wide range of original equipment part numbers, ensuring you receive the correct unit for your vehicle. Please verify that your original part number is on the list below to guarantee a perfect match.
Compatible Part Numbers: 05150627AB, 68057006AA, 68057006AB, 68057006AC, 68057006AD, 68057006AE, 68057006AF, 68057006AG, 68057008AA, 68057008AB, 68057008AC, 68057008AD, 68057008AE, 68057008AF, 68057015AA, 68057015AB, 68057015AC, 68057015AD, 68057015AE, 68057015AF, 68057015AG, 68057015AH
By purchasing this pre-programmed 2011 Avenger ECM, you are not just buying a part; you are investing in a reliable repair that addresses the core of your vehicle’s electronic management system. Restore the precise engine and transmission control your car had when it left the factory.
Frequently Asked Questions
Do I need to have this ECM programmed by a dealer?
Absolutely not. This unit is sold as a Plug & Play solution. We program it with your vehicle’s specific VIN and mileage before it ships. All you need to do is install it.
Where is the engine computer located on my 2011 Dodge Avenger?
On the 2011 Dodge Avenger with the 2.4L engine, the ECM is typically located in the engine bay, mounted to the firewall or near the driver’s side front wheel well, behind the bumper cover. It’s a silver metal box with several large electrical connectors.
What information do you need from me to program the module?
We require your vehicle’s 17-digit Vehicle Identification Number (VIN) and the current mileage. This ensures we can load the correct software and keep your vehicle’s systems synchronized.
Will this fix my check engine light?
If the check engine light is caused by a faulty ECM, then yes, this part will resolve the issue. A failing ECM can trigger a wide variety of diagnostic trouble codes (DTCs). This replacement will clear all module-related codes.
Is this part also for the 2011 Chrysler 200?
Yes, this ECM is fully compatible with the 2011 Chrysler 200 models equipped with the 2.4L engine and 6-speed automatic transmission, as they share the same platform and powertrain components as the Avenger.
What tools are needed for installation?
Installation typically requires only basic hand tools, such as a socket set (commonly 8mm or 10mm sockets) and a flathead screwdriver to release the connector clips. It is a straightforward process for a DIY mechanic.