2007-2011 Silverado 2500 BCM Body Control Module 25971916 Programmed

Restore Your Truck’s Electronics!

Eliminate frustrating electrical problems with this VIN-programmed Body Control Module for your 2007-2011 Silverado 2500. It’s the direct-fit solution for faulty lights, windows, and locks, arriving ready for a simple plug-and-play installation. Get your truck’s features working like new and order today!

$224.95

+11.99 USPS Priority Shipping

Availability: In stock



Guaranteed Safe Checkout

Is Your Silverado 2500 Plagued by Electrical Gremlins?

The Body Control Module, or BCM, is the central command center for your truck’s body electronics. When it begins to fail, it can cause a wide range of confusing and frustrating issues, from flickering lights to a non-responsive climate control system. If you’re experiencing strange electrical behavior in your 2007-2011 Silverado 2500, a faulty BCM is a very likely culprit. This genuine GM Body Control Module, part number 25971916, is the definitive solution. We pre-program it to your truck’s specific Vehicle Identification Number (VIN), ensuring it works correctly right out of the box, with no expensive dealership programming required.

From the Diagnostic Bay

We had a 2009 Silverado 2500 come into the shop that was driving the owner crazy. The radio would turn on and off by itself, the driver’s side power window worked only when it wanted to, and the airbag light was on. The owner had already replaced the window switch and checked fuses with no luck. After connecting our scanner, we saw multiple communication error codes pointing to the BCM. Instead of a complicated wiring repair, the fix was simple: we installed a VIN-programmed BCM. In under 10 minutes, all the strange electrical issues were gone, and the truck was back to being the reliable workhorse it was meant to be.

Common Symptoms of a Failing BCM

  • ✔ Power windows, door locks, or mirrors operating intermittently or not at all.
  • ✔ Interior or exterior lights flickering, staying on, or failing to turn on.
  • ✔ HVAC and climate control functions not working correctly (e.g., blower motor issues).
  • ✔ Vehicle security system acting up, causing no-start conditions or false alarms.
  • ✔ Airbag warning light illuminated on the dash, often with DTC B1001.
  • ✔ Wipers behaving erratically or not parking in the correct position.
  • ✔ A variety of communication-related Diagnostic Trouble Codes (DTCs) stored in the system.

The Plug-and-Play Solution: A Programmed 2007-2011 Silverado 2500 BCM

Don’t waste time and money at the dealership. Our service provides a BCM that is fully programmed with the latest GM software updates tailored to your truck’s VIN. This critical step ensures that all the specific options and features your vehicle was built with are recognized and controlled correctly by the new module. This direct-fit component restores the precise, reliable function of all body-related electronics, from the power seats to the horn. Installation is straightforward for any DIY mechanic; the module is typically located under the driver’s side dashboard near the steering column. In most cases, it’s a simple swap. However, please note that if your airbag light was on, a special procedure called ‘Setup SDM Primary Key in BCM’ may be required using a professional scan tool to sync the new BCM with the airbag system.

Frequently Asked Questions

What does the Body Control Module do on my Silverado 2500?

The BCM acts as the central computer for your truck’s comfort and convenience electronics. It controls functions like power windows, door locks, interior/exterior lighting, the security system, wipers, and the HVAC system.

Is this BCM ready to install out of the box?

Yes. We pre-program the module to your vehicle’s VIN before shipping. This ensures it is a plug-and-play installation with no need for additional dealership programming for most functions.

Where is the BCM located on a 2007-2011 Silverado 2500?

The BCM is typically located inside the cab, under the driver’s side of the dashboard, often near the steering column or integrated into the fuse panel area.

My airbag light is on. Will this fix it?

This module will fix airbag lights caused by an internal BCM failure (like DTC B1001). However, after installation, you may need a scan tool with special functions to perform the ‘Setup SDM Primary Key in BCM’ procedure to sync the new module with the airbag system and turn off the light.

Do I need to send my old BCM back?

No, there is no core charge for this part. You can keep your old module, which saves you the time and hassle of a return shipment.

Genuine OEM

Yes

Year
Condition

Refurbished

Model

Silverado 2500 Pickup

Make

Year

2008

Brand

CHEVROLET TRUCK

Warranty

1 Year

Interchange part number

MPN

25971916

Manufacturer Part Number

, , , , , , , , , , , , , , , , , , , ,

Scroll to Top