Is Your Vehicle Plagued by Baffling Electrical Problems?
If your 2011 Camaro, or another compatible GM vehicle, is experiencing a host of strange electrical issues, a failing Body Control Module (BCM) is often the culprit. The BCM is the central nervous system for your car’s body electronics, managing everything from your power windows and locks to the interior lighting and security system. When it starts to fail, it can create a cascade of frustrating and seemingly unrelated problems that can be difficult to diagnose.
Symptoms of a Failing Body Control Module
A faulty BCM doesn’t always fail completely. Often, it begins to exhibit intermittent problems that can leave you scratching your head. If you’re noticing any of the following, it’s time to consider your BCM as the potential source:
- ✔ Erratic or non-functional power windows, door locks, or mirrors.
- ✔ Interior or exterior lights that stay on, flicker, or don’t work at all.
- ✔ The security system or keyless entry failing to operate correctly.
- ✔ Horn honking unexpectedly or not working when pressed.
- ✔ Wipers activating on their own or not responding to the switch.
- ✔ False warnings on the dashboard instrument cluster.
- ✔ Communication errors with other modules when scanned with a diagnostic tool.
- ✔ Rapid battery drain while the vehicle is parked.
The Simple, No-Hassle Solution: Our BCM Programming Service
Forget about expensive dealership visits, towing fees, and the headache of programming a new module. Our unique service provides you with a replacement BCM that is a direct, plug-and-play solution for your vehicle. We handle all the complex programming for you by cloning the essential data from your original, failing module onto a fully functional replacement unit. This process ensures that the replacement BCM is perfectly matched to your vehicle’s specific configuration, including its VIN and factory options.
How Our Mail-In Service Works:
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ We Contact You: We will reach out to you with clear instructions and a shipping address to send your original BCM to us.
- ✔ Ship Your Original BCM: Carefully package and ship your module to our facility.
- ✔ We Program Your Replacement: Upon receiving your module, our expert technicians will transfer all the critical data to the replacement BCM, typically within 1-2 business days.
- ✔ Receive Your Plug-and-Play Module: We ship the programmed replacement BCM back to you. Once it arrives, simply install it, and you’re ready to go!
Compatibility and Your 2011 Camaro BCM
This service and module are a direct solution for the 2011 Camaro BCM and a wide array of other General Motors vehicles. This module, identified by part number 13583450, is also a compatible replacement for the following part numbers: 13579004, 13580198, 13582396, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, and 13583451. It fits models such as the Buick LaCrosse, Cadillac SRX, Chevrolet Volt, Equinox, Cruze, Orlando, and GMC Terrain from various years. Please verify your part number to ensure compatibility.
Important Post-Installation Information
While our goal is to provide a 100% plug-and-play part, certain vehicle systems may require a simple recalibration procedure after the new BCM is installed. These are not programming steps but rather synchronization procedures that can often be performed with a high-end diagnostic scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed to sync the airbag system with the new BCM. This is a security measure and is only required if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure proper operation of the brake lights and traction control system.
Always consult a factory service manual or a qualified technician for vehicle-specific procedures.
Frequently Asked Questions
Is this BCM truly plug-and-play?
Yes, for over 95% of installations. We clone all the necessary vehicle-specific data, so you won’t need to visit a dealer for programming. In rare cases, a simple relearn procedure as mentioned above may be required.
How long does the programming service take?
Once we receive your original BCM, our technicians typically complete the cloning process and ship your replacement module back out within 24-48 business hours.
Do I need to send my keys with the BCM?
No, you do not need to send your keys. All the necessary security information is stored within the BCM itself, which we transfer to the new unit.
What if my original BCM is completely dead or not communicating?
In many cases, even if the BCM is not communicating with the vehicle, we can still extract the necessary data directly from the board. Please contact us before ordering if your module is completely non-responsive.
Will this fix my specific electrical problem?
This service corrects issues caused by a faulty BCM. While the symptoms listed are common indicators, it’s essential to have your vehicle properly diagnosed to confirm the BCM is the root cause before ordering.