Is Your Cadillac SRX Experiencing Strange Electrical Problems?
If your 2011-2012 Cadillac SRX is acting possessed—with flickering lights, malfunctioning power windows, a haywire security system, or other bizarre electrical gremlins—a failing Body Control Module (BCM) is the most likely culprit. The BCM is the central nervous system for your vehicle’s body electronics, coordinating everything from your interior lights and door locks to the key fob and instrument cluster. When it fails, it can create a cascade of frustrating and seemingly unrelated issues that can be difficult to diagnose.
From the Diagnostic Bay
We had a 2012 SRX come into the shop that was driving its owner crazy. The radio would randomly change stations, the driver’s side window wouldn’t go down, and the alarm would go off in the middle of the night. The owner had already replaced the battery and checked all the fuses. After connecting our diagnostic tool, we saw multiple communication errors all pointing back to one component: the BCM. Instead of a costly and time-consuming replacement at the dealership, we performed a cloning service just like this one. We transferred the data from his faulty module to a replacement unit. After a simple plug-in installation, every single one of his vehicle’s electrical issues was gone. It was a straightforward fix that saved him hundreds of dollars and a lot of headaches.
The Simple, No-Dealer-Visit Solution
Forget about expensive dealership visits, towing fees, and the hassle of programming a new module from scratch. Our service provides a fully programmed 2011-2012 SRX BCM that is ready for installation right out of the box. We achieve this through a professional cloning service. Simply purchase this item, and we will contact you with instructions to ship your original BCM to us. Our expert technicians will extract the unique vehicle-specific data from your module and transfer it directly onto this replacement unit. We then ship the ready-to-install module back to you. This process ensures a seamless, plug-and-play installation that retains all your vehicle’s original settings and key programming.
Common Symptoms of a Failing BCM
- ✔ Intermittent or non-working power windows, door locks, or mirrors.
- ✔ Erratic behavior from interior or exterior lights (flickering, staying on, or not turning on at all).
- ✔ Security system malfunctions, including false alarms or preventing the vehicle from starting.
- ✔ Unresponsive key fobs or push-to-start systems.
- ✔ Warning lights on the dashboard illuminating for no reason (e.g., airbag, ABS, traction control).
- ✔ Radio, climate control, or infotainment system acting up.
- ✔ Wipers operating on their own or not working when needed.
Why Choose Our Programmed 2011-2012 SRX BCM Service?
This isn’t just a part; it’s a complete solution. By cloning your original module, we eliminate the need for any additional programming or calibration with expensive scan tools. Your vehicle won’t know the difference, and all its electronic features will be restored to their original working condition. This service is a cost-effective and reliable way to fix your vehicle’s electrical problems and get back on the road with confidence. This module is a direct fit for a wide range of GM vehicles, ensuring broad compatibility.
Installation and Post-Install Notes
Installation is typically a straightforward plug-and-play process. However, in some cases, minor post-installation procedures may be required:
- Airbag System Sync: If the airbag warning light is on after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure proper brake light and traction control functionality.
Always consult a factory service manual or a qualified technician if you are unsure about any part of the installation process.
Compatible Part Numbers:
This module and service are compatible with the following part numbers: 13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, 13583451.
Frequently Asked Questions
What is a BCM cloning service?
It’s a process where we transfer the vehicle-specific software, key data, and settings from your original Body Control Module to a replacement unit. This makes the replacement module plug-and-play, avoiding the need for expensive dealership programming.
Do I need to take my car to a dealer after installation?
No. Our programming service ensures the module is ready to install and function immediately. In the rare case an airbag light appears, a technician with a high-end scan tool can perform a quick sync procedure, but a dealer visit is not required.
How long does the programming service take?
Once we receive your original BCM, the cloning process is typically completed and the new module is shipped back out within 1-2 business days. We will provide you with a tracking number as soon as it ships.
Will this fix my car not starting?
If the no-start condition is caused by the BCM’s security system (the immobilizer), then yes, this programmed module will resolve the issue. However, a no-start can be caused by many other components, so proper diagnosis is key.
Is this compatible with other GM vehicles besides the SRX?
Yes. As you can see from the fitment list, this BCM fits a wide variety of GM models including the LaCrosse, Volt, Terrain, Equinox, Camaro, and more. Please verify your part number from the provided list to ensure compatibility.