Is Your Chevrolet Volt or GM Vehicle Experiencing Bizarre Electrical Issues?
If your car’s lights are flickering, windows are acting on their own, or you’re facing intermittent starting problems, the culprit is often a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s electronic accessories, managing everything from power locks and interior lighting to the security system. When it fails, it can cause a cascade of frustrating and unpredictable problems. Don’t let a faulty module keep you off the road. We offer a simple, reliable, and cost-effective solution.
From the Diagnostic Bay
We recently had a 2013 Chevy Volt come in with a classic case of BCM failure. The owner reported that the radio would randomly turn off, the dome lights would stay on, and occasionally, the car wouldn’t recognize the key fob. After confirming power and grounds were good, we pinpointed the BCM. Instead of a costly trip to the dealer for a new module and programming, the owner used our cloning service. We transferred the data from his original, faulty unit to our replacement module. He received it back, plugged it in, and all the strange electrical gremlins were gone. It’s a straightforward fix that saves hundreds of dollars and significant time.
Symptoms of a Failing Body Control Module
- ✔ Intermittent or non-functional power windows, locks, or mirrors.
- ✔ Erratic behavior from interior or exterior lights (flickering, staying on, or not turning on).
- ✔ Malfunctioning dashboard gauges or warning lights that appear for no reason.
- ✔ Problems with the vehicle’s security system or keyless entry.
- ✔ Unexplained battery drain when the vehicle is turned off.
- ✔ Communication errors with other vehicle modules, leading to various drivability issues.
Your Plug-and-Play Solution: The 2013 Volt BCM Cloning Service
Forget about expensive dealership visits and the hassle of programming a new module from scratch. Our professional cloning service makes this repair as simple as possible. Here’s how it works: you purchase this service and ship your original BCM to us. Our technicians will extract the unique, vehicle-specific data—including the VIN, mileage, and key programming—and flash it directly onto this replacement module. We then ship the fully programmed module back to you. The result is a true plug-and-play component that is ready for installation right out of the box, restoring full functionality to your vehicle without any additional steps.
Installation and Post-Install Considerations
Physically installing the BCM is typically a simple process, involving disconnecting the battery and swapping the modules. However, due to the integration of various safety systems, a couple of post-installation procedures may be necessary:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be required to ensure proper operation of the brake lights and traction control system.
Please note: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Guaranteed Compatibility
This BCM is a direct replacement for a wide range of GM vehicles. It is compatible with the following part numbers:
13579004, 13580198, 13582396, 13583450, 13586856, 13582688, 13586278, 13501737, 13501739, 13577924, 13580773, 13583451
It fits models including the Chevrolet Volt, Cruze, Camaro, Equinox, Orlando; Buick LaCrosse, Regal; GMC Terrain; and Cadillac SRX from approximately 2011-2013. Please verify your part number to ensure a perfect match.
Frequently Asked Questions
What exactly does the Body Control Module (BCM) do?
The BCM is a computer that controls and monitors many of your vehicle’s non-engine related functions. This includes power windows, door locks, interior and exterior lighting, wipers, the security system, and more. It acts as a central hub for these body electronics.
How does this programming service work?
After you place your order, we will provide instructions for you to ship your original BCM to us. Our technicians will then clone all the essential data from your module to the replacement unit. We then ship the new, pre-programmed module back to you, ready for installation.
Is this part difficult to install?
The physical installation is generally straightforward for someone with basic mechanical skills. It usually involves disconnecting the battery, accessing the BCM (location varies by model), and swapping the electrical connectors. The main benefit of our service is that it eliminates the difficult and expensive software programming step.
Will I need to visit a dealer after installing this BCM?
No, our service is designed to completely avoid dealer programming. The module arrives ready to be installed. In some cases, as noted above, a simple relearn procedure for the airbag or brake pedal sensor may be needed, which can be done by most independent repair shops.
How long does the cloning service take?
We typically perform the programming service and ship the replacement module back to you within 1-2 business days of receiving your original BCM. Return tracking information will be provided as soon as it ships.