Are you battling bizarre electrical issues in your 2012, 2013, or 2014 Chevrolet Camaro? From flickering lights and malfunctioning power windows to a car that refuses to start, a failing Body Control Module (BCM) can turn your prized vehicle into a source of constant frustration. The BCM acts as the central hub for your car’s body electronics, and when it fails, chaos ensues. Dealerships often charge a fortune for a new module plus mandatory programming fees. We offer a smarter, more affordable solution.
This listing is for a replacement BCM that comes fully programmed and ready for installation. How? Through our simple and reliable mail-in cloning service. You simply purchase this part, ship your original BCM to us, and we handle the rest. We will transfer all the critical data—including VIN, mileage, and security information—from your original module to this replacement unit. The result is a true plug-and-play solution that gets you back on the road without the dealership hassle. This service is the definitive fix for your 2012-2014 Camaro BCM problems.
From the Diagnostic Bay: The Case of the Haunted Camaro
A customer brought in a 2013 Camaro with a list of complaints that sounded like a ghost was in the machine. The radio would turn on by itself, the driver’s side window would sometimes not respond, and the security light would flash intermittently, occasionally preventing the car from starting. We checked for bad grounds and wiring issues, but everything seemed fine. The scan tool showed multiple U-codes (loss of communication) with various modules. After spending hours chasing these electrical phantoms, we isolated the BCM as the culprit. Instead of a costly new unit and programming, a cloned BCM had the car fixed in a day, proving that sometimes the most complex problems have the simplest solutions.
Common Signs of BCM Failure
If your vehicle’s BCM is failing, you might be experiencing one or more of the following issues. In my 20+ years of experience, these are the most frequent indicators:
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors working intermittently or not at all.
- ✔ The security system acting up, causing no-start conditions or false alarms.
- ✔ Horn honking unexpectedly or not working when pressed.
- ✔ Dashboard warning lights appearing for no reason.
- ✔ Diagnostic trouble codes (DTCs) related to communication errors, such as U0140, U0155, or other U-codes.
Your Straightforward BCM Installation Guide
Once you receive your programmed module from us, installation is a direct swap. For the 2012-2014 Camaro, the BCM is located behind the passenger-side dash panel.
- Safety First: Always disconnect the negative terminal from your car’s battery and wait a few minutes before working on any electronic components.
- Locate the BCM: On the Camaro, you’ll need to access the area behind the right-hand (passenger) side of the dashboard. This may require removing the glove box or a lower kick panel for access.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New Module: Mount your new, pre-programmed BCM in the same location and securely plug in all the electrical connectors. Ensure they click into place.
- Reconnect and Test: Reconnect the negative battery terminal. Turn the key to the ‘On’ position and test all body functions—lights, windows, locks, etc.—to confirm proper operation.
Important Post-Installation Steps
While our cloning service makes this a nearly plug-and-play process, some GM vehicles may require additional steps to ensure all systems are perfectly synced. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is on after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is needed. This requires a professional-grade scan tool to sync the airbag system with the new BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary for correct brake light and traction control operation.
Disclaimer: Vehicle systems can vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any step.
Will This Fit My Vehicle?
This BCM cloning service is guaranteed to work for the following vehicles and part numbers. Please match your part number or vehicle model to ensure compatibility. This module is a direct replacement for part numbers 13580696, 123589093, 13588446, 13584692, and 13583542.
- Buick LaCrosse: 2012 (ID 13580696), 2013
- Buick Regal: 2012
- Buick Verano: 2012
- Cadillac SRX: 2012 (ID 13580696)
- Chevrolet Camaro: 2012-2014
- Chevrolet Equinox: 2012
- Chevrolet Spark: 2013
- Chevrolet Volt: 2012
- GMC Terrain: 2012
Frequently Asked Questions
How does the mail-in cloning service work?
After you place your order, we will contact you with instructions to ship your original BCM to our facility. Once we receive it, our technicians will transfer all the essential data to the replacement module. We then ship the programmed replacement back to you, typically within 1-2 business days.
What if my original BCM is completely dead or unreadable?
In most cases, even if the BCM is failing, we can still extract the necessary data. If your module is severely damaged (e.g., by fire or water) and unreadable, we will contact you to discuss other options or provide a full refund.
Is this a permanent fix for my 2012-2014 Camaro BCM issues?
Yes. This service provides you with a fully functional, tested replacement BCM programmed specifically for your vehicle. It is designed to restore your car’s electronics to their original operating condition and resolve the symptoms of a faulty module.
Do I need any special tools for installation?
For most models, you will only need basic hand tools like a socket set and screwdrivers to access and swap the module. However, as noted, a professional scan tool may be required for post-installation procedures like the airbag system sync if the warning light appears.
Is there a core charge?
No, there is no core charge. We need your original module to perform the cloning service, but you do not need to return the replacement part to us after installation.