Tired of Chasing Electrical Gremlins in Your Camaro?
Is your 2012-2014 Camaro suffering from bizarre electrical issues? Flickering interior lights, power windows with a mind of their own, a security light that won’t turn off, or even a frustrating no-start condition? These aren’t just annoyances; they’re classic signs of a failing Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it malfunctions, it can cause a cascade of confusing and unpredictable problems. Taking your car to the dealership often means a hefty bill for diagnostics, the part itself, and expensive programming fees. We offer a better, more direct solution.
This is a comprehensive repair service for your vehicle’s BCM. You send us your original module, and we transfer all its critical data—including VIN, mileage, and key programming—to this fully tested replacement unit. The result? You receive a truly plug-and-play 2012-2014 Camaro BCM that is ready for installation right out of the box, eliminating the need for a trip to the dealer. It’s the most efficient way to restore your car’s functionality and get you back on the road with confidence.
A Technician’s Notebook: The Camaro That Wouldn’t Cooperate
A few months back, a 2013 Camaro was towed into the shop. The owner was at his wit’s end. The instrument cluster would randomly go dark, the radio would shut off, and sometimes the car just wouldn’t start, even with a new battery. He’d replaced relays and checked fuses, but the problems were intermittent and maddening. After connecting my scan tool, I saw a flurry of U-codes (communication errors) pointing to a network breakdown. The common denominator was the BCM. Instead of a costly new module and hours of programming, we used this exact cloning service. Once the programmed replacement BCM arrived, the physical swap took less than an hour. The car started on the first try, and every single electrical gremlin was gone. It’s a testament to how effective this solution is for complex electronic issues.
Common Signs of a Failing BCM
If you’re experiencing any of the following, a faulty BCM is the likely culprit. This replacement service is designed to permanently solve these issues.
- ✔ Intermittent or non-functional power windows, door locks, or interior lighting.
- ✔ The security or anti-theft system light stays on, preventing the engine from starting.
- ✔ Horn honking unexpectedly or not working at all.
- ✔ Inaccurate gauge readings on the instrument cluster.
- ✔ Communication error codes (U-codes) stored in the system, such as U0140.
- ✔ Wipers or turn signals operating erratically.
A Straightforward Guide to Installation
After you receive your pre-programmed BCM from us, installation is simple. The BCM in the 2012-2014 Camaro is typically located behind the right-hand side of the dashboard.
- Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
- Access the Module: You will likely need to remove the glove box or a lower dash panel on the passenger side to gain access to the BCM.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that must be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the Replacement: Mount your new, programmed BCM in the same location and securely reconnect all electrical connectors. You should hear a ‘click’ as they lock into place.
- Reconnect Power: Reattach the negative battery terminal.
- Perform Final Checks: Start the vehicle and test all body functions—lights, locks, windows, radio, etc.—to confirm the repair. Refer to the post-installation notes below for any additional steps that may be required.
Will This Fit My Vehicle?
This BCM service is guaranteed to be compatible with the following vehicles and part numbers. Please verify your part number or vehicle model to ensure a perfect match.
Part Numbers: 13580696, 123589093, 13588446, 13584692, 13583542
- Chevrolet Camaro: 2012, 2013, 2014 (Coupe, RH dash)
- Chevrolet Equinox: 2012 (LH side dash)
- Chevrolet Spark: 2013 (Left lower A-pillar)
- Chevrolet Volt: 2012 (RH engine compartment)
- Buick LaCrosse: 2012, 2013 (LH kick panel, ID 13580696)
- Buick Regal: 2012 (LH dash)
- Buick Verano: 2012 (Below center of dash)
- Cadillac SRX: 2012 (LH dash, ID 13580696)
- GMC Terrain: 2012 (LH side dash)
Important Post-Installation Information
While our cloning service makes this a plug-and-play repair, some vehicle systems may require a quick sync-up procedure after the new module is installed.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This is only necessary if the light appears.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be needed to ensure flawless brake light and traction control operation.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Frequently Asked Questions
How does the programming service work?
It’s simple! After you purchase, we will contact you with instructions to ship your original BCM to us. Once we receive it, we extract the vehicle-specific data and flash it onto the replacement module. We then ship the ready-to-install BCM back to you.
Do I need a dealership to install this?
No. Because we’ve handled all the programming, this part is plug-and-play. A confident DIYer or any independent mechanic can perform the physical installation, saving you hundreds in dealership fees.
Is there a core charge?
No, there is no core charge. We need your original module to perform the cloning service, but you are not required to return it after receiving the replacement.
What if the airbag light comes on after I install it?
In some cases, the new BCM needs to be electronically ‘introduced’ to the airbag module (SDM). This is a simple procedure called ‘Setup SDM Primary Key in BCM’ that can be performed with a professional-grade scan tool.
How do I know if this 2012-2014 Camaro BCM is the right part?
Please match your vehicle’s year and model to our fitment list. The most accurate way is to match the part number on your existing BCM to 13580696 or any of the alternate part numbers listed.