Tired of Unpredictable Electrical Gremlins in Your GM Vehicle?
As a technician with over two decades of experience, I’ve seen it all. A customer comes in with a car that seems possessed: the radio turns on and off by itself, the power windows have a mind of their own, the security light is flashing, and sometimes, it just refuses to start. These aren’t random, unrelated issues. More often than not, the culprit is a failing Body Control Module (BCM). The BCM is the nerve center for your vehicle’s comfort and security features, and when it starts to go, it can cause a cascade of frustrating and confusing problems. This is especially true for the complex electronics in modern GM vehicles.
If you’re dealing with these symptoms, you’ve likely been quoted a sky-high price at the dealership for a new module plus several hours of labor for programming. We offer a smarter, more affordable solution. This listing is for a replacement BCM that comes fully programmed with your vehicle’s specific data. By cloning the information from your original module, we provide a true plug-and-play part that eliminates the need for expensive dealer tools or additional programming fees. You get a reliable fix that restores your vehicle’s functionality without breaking the bank.
Case Study: The Ghost in the Machine
A few months back, a 2012 Chevy Orlando came into my shop with a truly baffling set of symptoms. The owner reported intermittent no-starts, flickering interior lights, and the horn honking randomly. He’d already replaced the battery and checked the alternator. My initial scan showed a dozen communication error codes (U-codes) pointing to multiple modules. This is a classic sign of a network issue, but the wiring harness checked out perfectly. The real breakthrough came when I noticed the BCM’s data stream would periodically freeze on my scan tool. It was the BCM itself, the central hub, that was corrupting the entire communication network. We performed a BCM clone just like this service, and the car was back to perfect working order in a day. It’s a perfect example of how a single failing module can mimic a dozen different problems.
Is Your Vehicle Showing These Signs of BCM Failure?
A failing BCM can manifest in numerous ways. If you’re experiencing any of the following, this programmed module is your solution.
- ✔ Unresponsive or erratic power windows, door locks, or mirrors.
- ✔ Interior or exterior lights that flicker, stay on, or don’t work at all.
- ✔ The security or anti-theft light is illuminated, preventing the engine from starting.
- ✔ The horn honks unexpectedly or doesn’t work when pressed.
- ✔ Multiple, seemingly unrelated warning lights on the dashboard (e.g., ABS, Airbag, Traction Control).
- ✔ Communication error codes, such as U0140, U0155, or other U-series codes.
- ✔ Wipers activating on their own or not working when switched on.
Your Simple Installation Roadmap
Our cloning service makes the final installation incredibly straightforward. Here’s how the process works from start to finish:
- Purchase & Ship: After you place your order, we will contact you with detailed instructions for shipping your original BCM to our facility. Please ensure your contact information is accurate.
- Expert Programming: Once we receive your module, our technicians will professionally extract all critical data (VIN, key information, option content) and transfer it to the replacement BCM.
- Receive & Install: We ship the plug-and-play replacement BCM back to you. Once it arrives, locate and disconnect your old BCM. For the 2012 Orlando, this is typically found below the center console.
- Safety First: Before you begin, always disconnect the negative terminal of your vehicle’s battery to prevent electrical shorts.
- Swap the Module: Carefully unplug the electrical connectors from the old BCM and remove it from its mounting bracket. Install the new, programmed module in its place and securely reconnect all connectors.
- Final Checks: Reconnect the battery terminal. Start the vehicle and test all body functions—lights, locks, windows, radio, etc.—to confirm the repair.
Important Post-Installation Notes
In some cases, specific systems may require a relearn procedure after the BCM is replaced. This is standard for many modern vehicles. Please be aware of the following:
- Airbag System Sync: If the airbag warning light is on after installation, a procedure called ‘Setup SDM Primary Key in BCM’ is needed. This requires a professional-grade scan tool to sync the new BCM with the airbag system.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor relearn to ensure correct brake light operation and to prevent issues with the traction control system.
Disclaimer: Vehicle systems vary. We always recommend consulting a factory service manual or a certified technician if you are unsure about any step of the process.
Verified Vehicle Compatibility
This BCM is a direct replacement for part numbers 13582688, 13583450, 13579004, 13580198, 13582396, 13586856, 13586278, 13501737, 13501739, 13577924, 13580773, and 13583451. It is confirmed to fit the following makes and models:
- Buick LaCrosse: 2011, 2012
- Buick Regal: 2011 (w/opt AUA)
- Cadillac SRX: 2011, 2012
- Chevrolet Camaro: 2011 (Convertible)
- Chevrolet Cruze: 2012
- Chevrolet Equinox: 2011
- Chevrolet Orlando: 2012
- Chevrolet Volt: 2011, 2013
- GMC Terrain: 2011
Our cloning process ensures that even if your vehicle has specific options, the replacement module will function exactly as the original did. Plus, there is no core charge—you can keep your old module.
Frequently Asked Questions
How does the mail-in cloning service work?
After your purchase, we’ll provide a shipping address. You send us your original BCM. We then copy its unique programming to our replacement module and ship it back to you. This ensures it’s a perfect match for your vehicle’s VIN and options.
Do I need to do any programming myself?
No. The module you receive from us is pre-programmed and ready for installation. This service completely bypasses the need for expensive dealership programming or specialized scan tools for the initial setup.
What is the turnaround time?
We typically program and ship your replacement module within 1-2 business days of receiving your original BCM. Return shipping time will depend on your location.
Is this a guaranteed fix for my vehicle’s electrical problems?
If your vehicle’s issues match the common symptoms of BCM failure and a professional has diagnosed the BCM as the faulty component, this service is the definitive solution. It restores the BCM to full factory functionality.
Why is cloning better than just buying a used BCM?
A used BCM from another vehicle will have the wrong VIN and security data, which will prevent your car from starting. Our cloning service transfers your car’s exact data, making our module a true plug-and-play solution that works correctly right away.
Where is the BCM located on my 2012 Chevy Orlando?
On the 2012 Chevrolet Orlando, the Body Control Module is typically located underneath the center console area. Always consult a service manual for the precise location and removal procedure for your specific vehicle.