Is your 2013-2017 Buick Verano or other GM vehicle suffering from bizarre electrical issues? Flickering lights, unresponsive power windows, a security system that acts up, or an instrument cluster that seems possessed are classic signs of a failing Body Control Module (BCM). As the central nervous system for your car’s comfort and convenience features, a faulty BCM can make driving a frustrating experience. Dealerships will quote you a high price for a new module, plus expensive programming fees. We offer a smarter, more affordable solution.
This is a comprehensive cloning service for a replacement BCM compatible with part number 13588447. You simply send us your original BCM, and we transfer all its critical data—including VIN, mileage, and key information—to a fully tested replacement unit. We then ship the ready-to-install module back to you. This process completely eliminates the need for a trip to the dealer for programming, saving you time, money, and hassle.
From the Diagnostic Bay: The Case of the Confused Cruze
A customer brought in a 2015 Chevy Cruze with a laundry list of complaints: the radio would turn off randomly, the driver’s side window wouldn’t go down, and occasionally, the car wouldn’t start at all. There were no check engine lights, just a slew of communication (U-codes) stored in various modules. After tracing the communication network, I pinpointed the BCM as the source of the electrical noise. The owner had already tried a junkyard BCM, but the car wouldn’t even recognize the key. This is a classic BCM scenario. By cloning his original module’s data onto our replacement, we had him back on the road in a day with all functions restored, no extra programming needed. It’s the most reliable fix for these complex systems.
What to Watch For: Signs of a Failing BCM
A failing BCM can cause a wide range of symptoms that may seem unrelated. If your car is experiencing any of the following, your BCM is the likely culprit:
- ✔ Erratic or non-functional power windows, door locks, or interior/exterior lights.
- ✔ The security system light stays on, or the alarm goes off for no reason.
- ✔ Intermittent no-start condition where the engine cranks but won’t fire up.
- ✔ Instrument panel gauges behaving erratically or going dark.
- ✔ Stored diagnostic trouble codes (DTCs) related to communication, such as U0140, U0155, or other U-codes pointing to a loss of communication with other modules.
- ✔ Features like remote keyless entry or windshield wipers stop working.
Your Straightforward BCM Replacement Guide
Our goal is to make this repair as simple as possible. Here’s how our professional cloning service works:
- Step 1: Place Your Order. Purchase this BCM cloning service.
- Step 2: Await Contact. We will contact you via the information on your order to coordinate the shipping of your original module.
- Step 3: Ship Your Original BCM. Carefully package and send your vehicle’s original BCM to our facility.
- Step 4: We Handle the Programming. Upon receipt, our technicians will meticulously transfer all necessary data to the replacement BCM.
- Step 5: Receive Your Ready-to-Install Part. We ship the fully programmed BCM back to you, typically within one business day of receiving your original. Tracking information will be provided.
- Step 6: Install and Drive. Simply install the BCM. In most cases, it’s a direct plug-and-play process.
Important Post-Installation Notes
While our programming makes this a plug-and-play solution, some vehicle systems may require a quick sync-up after the BCM is reconnected. Please be aware of the following possibilities:
- Airbag System Sync: If your airbag warning light illuminates after installation, a simple “Setup SDM Primary Key in BCM” procedure is needed. This requires a professional-grade scan tool to sync the modules and clear the light.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor relearn may be required to ensure your brake lights and traction control system function correctly.
Disclaimer: Always consult a factory service manual or a qualified technician if you are unsure about any part of the installation process.
Verified Fitment for Your General Motors Vehicle
This BCM is a direct replacement for part number 13588447 and is compatible with several other part numbers. It is guaranteed to fit the following vehicles:
- Buick Verano: 2013-2017 (Body Control (BCM); below center of dash)
- Buick Encore: 2013-2014 (Body Control (BCM); LH side of dash)
- Buick Regal: 2013 (Body Control (BCM); LH dash)
- Cadillac SRX: 2013 (Body Control (BCM); LH dash)
- Chevrolet Cruze: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited) (Body Control (BCM); LH kick panel)
- Chevrolet Equinox: 2013-2017 (Body Control (BCM); LH side dash)
- Chevrolet Malibu: 2013 (Body Control (BCM); LH kick panel)
- Chevrolet Orlando: 2013-2014 (Body Control (BCM); below center console)
- Chevrolet Spark: 2014-2015 (gasoline model, left lower a-pillar)
- Chevrolet Trax: 2013-2014 (Body Control (BCM); LH side of dash)
- Chevrolet Volt: 2013 (RH engine compartment, ID 13580697 or 13586273)
- GMC Terrain: 2013-2017 (Body Control (BCM); LH side dash)
This module also replaces the following part numbers: 13584695, 13586273, 13580697, 13589197, 13589324, 13589325.
Frequently Asked Questions
What exactly does a Body Control Module (BCM) do?
The BCM is a computer that manages many of your vehicle’s non-engine related functions. This includes power windows, locks, interior and exterior lighting, wipers, security system, and communication between other onboard computers.
Why do I have to send you my original BCM?
Your original BCM contains unique data specific to your vehicle, including the VIN and security information for your keys. By cloning this data to the replacement module, we ensure it works perfectly with your car without any additional, expensive programming.
Is this BCM truly plug-and-play?
Yes, because we clone your original data, the module is programmed and ready for installation upon arrival. In rare cases, a secondary procedure like an airbag sync may be needed, which is common for this type of repair.
How long does the cloning service take?
We perform the cloning and ship the replacement module back to you within one business day of receiving your original BCM. Total time depends on shipping transit times.
Is there a core charge or do I get my old part back?
There is absolutely no core charge for this service. We will return your original, non-working BCM along with the programmed replacement unit.