Restore Your Vehicle’s Electrical System with a Plug-and-Play BCM
Are you experiencing frustrating electrical issues in your Buick Verano, Chevy Cruze, Equinox, or other compatible GM vehicle? Problems like flickering lights, non-responsive power windows and locks, or a security system that prevents your car from starting are often traced back to a single component: a failing Body Control Module (BCM). The BCM acts as the central command center for your car’s body electronics, and when it fails, it can cause a wide range of perplexing symptoms. This replacement BCM, part number 13584695, is the definitive solution to get your vehicle back in perfect working order.
The Simple, No-Hassle Programming Solution
Forget expensive trips to the dealership for programming and calibration. Our unique service makes this repair straightforward and cost-effective. We perform a direct data transfer, or ‘cloning,’ from your original, failing BCM to this replacement unit. This process copies all of your vehicle’s specific settings, key information, and security data. The result is a truly plug-and-play module. Once you receive it back from us, you simply install it, and your vehicle will recognize it as the original. No additional programming or dealer intervention is required.
From the Diagnostic Bay
We recently had a 2015 Chevy Equinox in the shop with a classic case of BCM failure. The customer reported that the interior lights would stay on, draining the battery overnight, and the remote key fob worked only intermittently. After confirming the BCM was the culprit, we performed this exact data cloning service. The customer was able to install the replacement module themselves in under an hour, completely resolving all the electrical gremlins and saving them hundreds compared to the dealership’s quote.
Common Symptoms of a Failing BCM
- ✔ Erratic or non-functional power windows, door locks, and mirrors.
- ✔ Interior dome lights or exterior lamps flickering, staying on, or not working at all.
- ✔ The vehicle’s anti-theft or security system activating randomly or preventing startup.
- ✔ Unexplained and persistent battery drain when the vehicle is turned off.
- ✔ False warning indicators appearing on the instrument cluster.
- ✔ Horn honking unexpectedly or not working when pressed.
- ✔ Intermittent operation of the windshield wipers.
How Our BCM Programming Service Works
The process is designed for your convenience:
- Place Your Order: Complete your purchase through our secure checkout. Please ensure your contact information is accurate.
- We Contact You: Our team will reach out to you with clear, step-by-step instructions for shipping your original BCM to our facility.
- We Program Your Module: Upon receiving your original BCM, our technicians will expertly transfer all the necessary data to the replacement unit, typically within 1-2 business days.
- We Ship It Back: We will ship your newly programmed, ready-to-install BCM back to you and provide tracking information.
Installation and Post-Install Considerations
Physical installation is generally straightforward, involving disconnecting the battery and swapping the modules. However, in some cases, additional electronic ‘handshake’ procedures may be needed after the part is installed.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure must be performed with a professional-grade scan tool. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: To ensure proper brake light and traction control function, a brake pedal position sensor recalibration may be necessary on certain models.
Always consult a factory service manual or a qualified technician for vehicle-specific guidance.
Guaranteed Fitment for Your 2013-2017 Verano Body Control Module
This module is a direct replacement for a wide range of General Motors vehicles. It is compatible with the following part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325. It fits the following models:
- Buick Verano: 2013-2017 (below center of dash)
- Buick Encore: 2013-2014 (LH side of dash)
- Buick Regal: 2013 (LH dash)
- Cadillac SRX: 2013 (LH dash)
- Chevrolet Cruze: 2013-2015 & 2016 Limited (LH kick panel)
- Chevrolet Equinox: 2013-2017 (LH side dash)
- Chevrolet Malibu: 2013 (LH kick panel)
- Chevrolet Orlando: 2013-2014 (below center console)
- Chevrolet Spark: 2014-2015 (gasoline model, left lower a-pillar)
- Chevrolet Trax: 2013-2014 (LH side of dash)
- Chevrolet Volt: 2013 (RH engine compartment)
- GMC Terrain: 2013-2017 (LH side dash)
Frequently Asked Questions
What is a ‘cloning’ service?
Cloning is the process of reading the critical vehicle-specific data—such as VIN, key codes, and security information—from your original BCM and writing it onto the replacement module. This makes the new module an exact electronic match to your old one, avoiding the need for dealership programming.
Why do I have to ship my original part to you?
Your original BCM holds the unique electronic key to your vehicle. We need it in our possession to perform the data transfer. Without it, the replacement module would not be able to communicate with your car’s other systems.
How long does the entire process take?
Once we receive your original module, our programming service typically takes 1-2 business days. The total time will depend on shipping times to and from our facility. We will provide you with tracking information as soon as your programmed module is on its way back to you.
Is this part difficult to install myself?
For most DIYers with basic tools, the physical installation is manageable. The BCM is typically located under the dash. The main challenge is accessing it. The key benefit of our service is that the electronic side is already handled, making it a plug-and-play installation.
What if my airbag light is on after I install it?
This is a known possibility. It simply means the BCM and the airbag module (SDM) need to be electronically re-introduced. A qualified mechanic with a professional scan tool can perform the ‘Setup SDM Primary Key in BCM’ procedure to resolve this.