Is Your GM Vehicle Plagued by Electrical Gremlins?
If your Buick Verano, Chevy Cruze, or GMC Terrain is experiencing bizarre electrical issues like flickering lights, malfunctioning power windows, or random warning messages, a failing Body Control Module (BCM) is the most likely culprit. The BCM is the central nervous system for your vehicle’s body electronics, controlling everything from the interior lights and power locks to the security system. When it fails, it can create a cascade of frustrating and unpredictable problems, making your car unreliable and difficult to operate.
Symptoms of a Failing Body Control Module
A faulty BCM can manifest in numerous ways. If you’re noticing several of the following symptoms, it’s a strong indication that your BCM needs attention. This replacement module is the definitive solution for these common issues.
- ✔ Erratic or non-functional interior and exterior lights.
- ✔ Power windows, door locks, or mirrors working intermittently or not at all.
- ✔ The vehicle’s security system engaging randomly or preventing the car from starting.
- ✔ Key fob or remote entry system failure.
- ✔ Instrument cluster gauges behaving erratically or displaying incorrect information.
- ✔ Horn sounding unexpectedly or not working when pressed.
- ✔ Communication error codes (U-codes) stored when scanned with a diagnostic tool.
The Simple, No-Hassle Solution: Our BCM Cloning Service
Replacing a BCM isn’t as simple as swapping the part. A new module from the dealership requires expensive and complex programming to sync it with your vehicle’s unique VIN, security information, and optional features. Our professional cloning service completely eliminates this step. We transfer all the critical data from your original BCM directly onto this replacement unit. The result is a true plug-and-play module that is ready for installation right out of the box, saving you hundreds of dollars in dealership fees and programming labor.
How The Process Works:
- ✔ Place Your Order: Complete your purchase through our secure checkout.
- ✔ We Contact You: We will reach out to you with clear, step-by-step instructions for shipping your original BCM to our facility. Please ensure your contact information is accurate.
- ✔ Ship Your Module: Carefully package and send us your original BCM.
- ✔ We Program Your Replacement: Upon arrival, our technicians will professionally clone all necessary data to the replacement module.
- ✔ We Ship It Back: We ship the ready-to-install BCM back to you, typically within 1-2 business days, and provide you with tracking information.
Guaranteed Fitment for Your 2013-2017 Verano BCM and More
This BCM is a direct replacement for several part numbers and fits a wide range of General Motors vehicles. Please verify that your vehicle is on the list below. This module is compatible with part numbers: 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325.
- Buick Encore: 2013-2014 (LH side of dash)
- Buick Regal: 2013 (LH dash)
- Buick Verano: 2013-2017 (below center of dash)
- Cadillac SRX: 2013 (LH dash)
- Chevrolet Cruze: 2013 (LH kick panel, w/o opt ATH), 2014-2015 (LH kick panel), 2016 (LH kick panel, VIN P – Limited)
- Chevrolet Equinox: 2013-2017 (LH side dash)
- Chevrolet Malibu: 2013 (LH kick panel)
- Chevrolet Orlando: 2013-2014 (below center console)
- Chevrolet Spark: 2014-2015 (left lower a-pillar, gasoline model)
- Chevrolet Trax: 2013-2014 (LH side of dash)
- Chevrolet Volt: 2013 (RH engine compartment, ID 13580697 or 13586273)
- GMC Terrain: 2013-2017 (LH side dash)
Important Post-Installation Information
While our cloning service makes this a plug-and-play part, some vehicle systems may require a recalibration procedure after the BCM is installed. These are simple procedures for a qualified technician with a professional scan tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, the ‘Setup SDM Primary Key in BCM’ procedure must be performed. This syncs the new BCM with the airbag system’s Sensing and Diagnostic Module (SDM).
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be necessary to ensure correct brake light operation and to satisfy the traction control system.
Disclaimer: Specific procedures can vary by vehicle. Always consult a factory service manual or a qualified technician for guidance.
Frequently Asked Questions
What is this cloning service and how does it work?
Our cloning service is a process where we transfer the essential vehicle-specific data—like the VIN, security keys, and options configuration—from your original BCM to this replacement unit. This makes the replacement module plug-and-play, avoiding the need for expensive dealership programming.
Do I need to take my car to the dealer after installation?
No. Because we have cloned your original module’s data, you will not need to visit a dealer or locksmith for programming. In some rare cases, a simple relearn procedure like for the brake pedal sensor may be needed, which any competent shop can perform.
What if my original BCM is water damaged or won’t communicate?
In many cases, even with water damage or communication failure, we can still extract the necessary data. Please contact us before ordering if your module has severe physical damage or is completely non-responsive, and we can advise on the likelihood of a successful clone.
How long does the entire process take?
Once we receive your original module, our service typically takes 1-2 business days. The total time will depend on the shipping speed you choose to send your module to us and for us to return it to you.
Will this fix all of my vehicle’s electrical problems?
This BCM will resolve all issues directly caused by a faulty BCM. However, it will not fix problems originating from other sources, such as bad wiring, faulty sensors, or other failing modules. A proper diagnosis is key to ensuring you are replacing the correct part.
Is there a core charge for this part?
No, there is no core charge. We require your original module for the data transfer service only. You can keep your original module after the service is complete if you wish, although it will no longer be functional for your vehicle.