Restore Your Vehicle’s Electrical System with a Hassle-Free BCM
Are you dealing with baffling electrical issues in your 2013-2014 Chevrolet Trax? Flickering lights, unresponsive power windows, or random warning chimes can point directly to a failing Body Control Module (BCM). As the central hub for your vehicle’s body electronics, a faulty BCM can make driving frustrating and unpredictable. This isn’t just a replacement part; it’s a complete, straightforward solution. We provide a fully programmed BCM that is a direct clone of your original, eliminating the need for expensive dealership visits and complex programming procedures.
The process is simple: after your purchase, you’ll ship your original BCM to our facility. Our expert technicians will extract the essential data and transfer it directly to this replacement unit. We then ship the ready-to-install module back to you. This ensures seamless integration with your vehicle’s existing systems, including the immobilizer and key settings. It’s the most efficient way to get a reliable, functioning 2013-2014 Trax BCM without the typical dealership headaches.
A Technician’s Notebook: The Phantom Window Problem
A customer brought in a 2014 Chevy Trax with a driver’s side window that worked intermittently. They had already replaced the window switch and the motor, but the problem persisted. Diagnostics showed no power at the switch, but only sometimes. This is a classic BCM failure symptom I’ve seen dozens of times. The internal relays and circuits within the BCM that control power to these accessories begin to fail, creating phantom problems that seem impossible to trace. We swapped in a programmed BCM, and the window has worked flawlessly ever since. It saved the customer from chasing electrical gremlins and replacing perfectly good parts.
Is Your Vehicle Showing These Symptoms?
A failing BCM can cause a wide range of confusing issues. If you’re experiencing any of the following, your BCM is the likely culprit:
- ✔ Power windows, door locks, or interior lights working erratically or not at all.
- ✔ The security system acting up or preventing the car from starting.
- ✔ Horn honking randomly or not working when pressed.
- ✔ Dashboard warning lights appearing for no reason.
- ✔ Communication error codes, such as U0140 (Lost Communication With Body Control Module).
- ✔ Wipers or turn signals behaving unpredictably.
A Straightforward Guide to Your BCM Swap
Once you receive your programmed module from us, the physical installation is very manageable. Here’s a general guide for the Chevy Trax:
- Safety First: Always disconnect the negative terminal from your vehicle’s battery before working on any electronic components.
- Locate the BCM: In the 2013-2014 Trax, the BCM is typically found on the left-hand (driver’s) side of the dash, often behind the lower dash panel or near the kick panel.
- Disconnect and Remove: Carefully unplug the electrical connectors from the old BCM. They have locking tabs that need to be depressed. Once disconnected, unbolt or unclip the module from its mounting bracket.
- Install the New BCM: Mount your new, pre-programmed BCM in the same location and securely reconnect all the electrical harnesses.
- Reconnect Power: Re-attach the negative battery terminal.
- Test Functions: Start the vehicle and test all body functions—windows, locks, lights, wipers, and radio—to confirm everything is working correctly.
Important Post-Installation Information
In some cases, additional synchronization procedures may be needed after installing your new 2013-2014 Trax BCM. These are typically required if specific warning lights appear:
- Airbag System Sync: If the airbag light is on, a professional scan tool is needed to perform the ‘Setup SDM Primary Key in BCM’ procedure. This syncs the new BCM with the airbag system.
- Brake Pedal Position Relearn: Some models may require a brake pedal position sensor recalibration to ensure proper brake light and stability control operation.
Disclaimer: Vehicle systems vary. Always consult a factory service manual or a qualified technician for procedures specific to your vehicle.
Verified Vehicle Compatibility
This BCM is a direct fit for a wide range of GM vehicles. Please verify your part number and model from the list below. This module is compatible with part numbers 13584695, 13586273, 13580697, 13588447, 13589197, 13589324, and 13589325.
- Chevrolet Cruze: 2013 (w/o opt ATH), 2014-2015, 2016 (Limited)
- Chevrolet Equinox: 2013-2017
- Chevrolet Malibu: 2013
- Chevrolet Orlando: 2013-2014
- Chevrolet Spark: 2014-2015 (Gasoline)
- Chevrolet Trax: 2013-2014
- Chevrolet Volt: 2013
- Buick Encore: 2013-2014
- Buick Regal: 2013
- Buick Verano: 2013-2017
- Cadillac SRX: 2013
- GMC Terrain: 2013-2017
Frequently Asked Questions
How does the cloning service work?
After you place your order, we will contact you with instructions to ship your original BCM to us. We then copy its unique data to the replacement BCM and ship the new, ready-to-install module back to you.
Do I need to take my car to a dealer after installation?
No. Because we clone your original module’s data, this replacement BCM is plug-and-play. This service is designed to help you avoid dealership programming fees.
What is the turnaround time?
We typically program and ship your replacement module within 1-2 business days of receiving your original BCM. We will send you tracking information once it is on its way back to you.
Is this a reliable fix for my 2013-2014 Trax BCM issues?
Absolutely. This is a tested and verified solution for the common electrical failures associated with the original BCM. It restores factory functionality without altering your vehicle’s core programming.
What if my original BCM is completely dead or not communicating?
In many cases, we can still recover the necessary data even from a non-communicating module. Please contact us with the specifics of your issue before ordering if you have concerns about your module’s condition.