Restore Full Electrical Function to Your GM Vehicle
Are you battling a storm of bizarre electrical problems in your Chevrolet Orlando, Equinox, or Cruze? Flickering lights, unresponsive power windows, a security system that acts on its own, or a vehicle that refuses to start can often be traced back to a single, critical component: the Body Control Module (BCM). The BCM is the central command center for your vehicle’s body electronics, and when it begins to fail, it can trigger a cascade of frustrating and seemingly disconnected issues. Our professional BCM cloning service provides a simple, permanent, and cost-effective solution to restore your vehicle’s proper operation without the high costs and complexities of dealership programming.
Common Symptoms of a Failing BCM
If you’re experiencing any of the following issues, a faulty Body Control Module is the likely culprit. Proper diagnosis is always recommended, but these symptoms are classic indicators of BCM failure:
- ✔ Intermittent or completely non-functional power windows, door locks, and interior lighting.
- ✔ The horn sounding randomly or not working when pressed.
- ✔ Security system malfunctions, such as false alarms or the inability to recognize your key fob.
- ✔ Instrument cluster gauges behaving erratically, dropping to zero, or not working at all.
- ✔ Warning messages like “Service Theft Deterrent System” appearing on your dashboard.
- ✔ A no-start condition where the engine cranks but won’t turn over, despite a healthy battery.
- ✔ Windshield wipers activating on their own or failing to respond to the control switch.
The Simple Plug-and-Play Solution: Our Cloning Service Explained
Simply buying a new or used BCM from a dealer or salvage yard won’t solve your problem. Each BCM is programmed with a unique Vehicle Identification Number (VIN) and specific security data that is exclusive to the car it came from. Our service completely bypasses this obstacle. We expertly transfer 100% of the critical data from your original, failing BCM directly onto this replacement unit. This includes your VIN, key fob information, security protocols, and any vehicle-specific options. The result is a module that is a perfect electronic match for your car, ready for immediate installation with no further programming needed.
How It Works:
- ✔ Place Your Order: Purchase this BCM service on our website.
- ✔ We’ll Contact You: After your purchase, we will email you with clear, simple instructions for shipping your original BCM to our facility.
- ✔ Ship Us Your Original BCM: Package your module securely and send it to us.
- ✔ We Perform the Cloning: Our expert technicians will perform a full data transfer to the replacement module, typically within one business day of its arrival.
- ✔ We Ship It Back: We will ship the fully programmed, plug-and-play BCM back to you with tracking information.
Guaranteed Fitment for Your 2013-2014 Orlando BCM & Other Models
This Body Control Module is a direct replacement for part number 13589324 and several other interchangeable part numbers. It is compatible with a wide range of General Motors vehicles. Please confirm that your vehicle is on the list below to ensure compatibility.
- CHEVROLET CRUZE: 2013 (w/o opt ATH), 2014-2015, 2016 (VIN P, Limited)
- CHEVROLET EQUINOX: 2013-2017
- CHEVROLET MALIBU: 2013
- CHEVROLET ORLANDO: 2013-2014
- CHEVROLET SPARK: 2014-2015 (gasoline model)
- CHEVROLET TRAX: 2013-2014
- CHEVROLET VOLT: 2013 (ID 13580697 or 13586273)
- BUICK ENCORE: 2013-2014
- BUICK REGAL: 2013
- BUICK VERANO: 2013-2017
- CADILLAC SRX: 2013
- GMC TERRAIN: 2013-2017
Important Post-Installation Procedures
While our cloning service makes this a plug-and-play part, certain vehicle systems may require a recalibration or sync procedure after the BCM is reconnected. These are standard procedures and can be performed by any qualified technician with a professional-grade diagnostic tool.
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is necessary to sync the airbag system with the new BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration may be required to ensure correct brake light operation and to prevent issues with the traction control system.
Frequently Asked Questions
What if my original BCM is completely dead or water damaged?
In most cases, even if the BCM is not communicating with the vehicle, we can still extract the necessary data from the board. If your module has significant physical or water damage, please contact us before placing your order so we can confirm the likelihood of a successful data recovery.
Do I need to send my keys or ignition switch?
No. All the necessary key and security information is stored within the BCM itself. We transfer this data directly, so your existing keys will work perfectly with the replacement module as soon as it’s installed.
Is this an easy part to replace myself?
The physical replacement of the BCM is generally straightforward for someone with basic mechanical skills. It is typically located under the dashboard or in a kick panel area. However, be aware that some post-installation procedures, like the airbag sync, may require a professional scan tool that is not available to most DIY mechanics.
How long does the entire process take?
We pride ourselves on a fast turnaround. The cloning service itself is typically completed within 24-48 hours of us receiving your original module. The total time will depend on shipping times to and from our facility.
Will this fix my specific problem?
This part will resolve any and all issues directly caused by a faulty Body Control Module. If your vehicle’s problem is due to a separate issue, such as a wiring short or another failing component, this part will not resolve it. Accurate diagnosis is the key to a successful repair.