Restore Full Functionality to Your GM Vehicle
Are you battling frustrating electrical issues in your Chevrolet Equinox, GMC Terrain, or other compatible GM model? Flickering lights, malfunctioning power windows, a dead instrument cluster, or a vehicle that refuses to start are all classic symptoms of a failing Body Control Module (BCM). The BCM is the central nervous system for your vehicle’s body electronics, and when it fails, it can cause widespread and unpredictable problems. This mail-in programming service for your 2013-2017 Equinox BCM is the most reliable and cost-effective solution to get your vehicle back in perfect working order.
Why a Simple Swap Isn’t Enough
Modern Body Control Modules are not simple plug-and-play components. They are programmed with your vehicle’s specific Vehicle Identification Number (VIN), key immobilizer data, and settings for various options like power seats, lighting packages, and security systems. Simply installing a used BCM from another vehicle will result in a no-start condition and a host of new electronic problems. Our professional programming service bypasses this entire headache.
Our Simple, Hassle-Free Process
We’ve streamlined the repair process to be as simple as possible. You don’t need to worry about dealer appointments or expensive diagnostic tools. Here’s how it works:
- Place Your Order: Complete your purchase through our secure checkout.
- Receive Instructions: We will contact you via email with detailed instructions on how to remove and where to ship your original BCM.
- Ship Your Module: Carefully package and send us your original BCM.
- We Handle the Programming: Upon receipt, our expert technicians will perform a full data transfer from your original module to a fully tested replacement unit. This process clones all the essential information, making the new module an exact digital copy of your old one.
- Receive Your Ready-to-Install BCM: We ship the programmed module back to you, typically within 1-2 business days. Installation is as simple as plugging it in.
Symptoms of a Failing BCM
- ✔ Intermittent or non-functional headlights, taillights, or interior lights.
- ✔ Power windows, door locks, or mirrors operating erratically or not at all.
- ✔ The security system light is flashing, and the engine won’t start (anti-theft active).
- ✔ Inaccurate or dead gauges on the instrument cluster.
- ✔ Key fobs are not being recognized by the vehicle.
- ✔ Unexplained parasitic battery drain that kills your battery overnight.
- ✔ Warning messages on the driver information center, such as “Service Airbag” or “Service StabiliTrak.”
Guaranteed Compatibility
This service is a direct solution for part number 13588447 and is also compatible with the following interchangeable part numbers: 13584695, 13586273, 13580697, 13589197, 13589324, and 13589325. It fits a wide range of GM vehicles, including:
- 2013-2017 Chevrolet Equinox
- 2013-2017 GMC Terrain
- 2013-2016 Chevrolet Cruze (including 2016 ‘Limited’ models)
- 2013-2017 Buick Verano
- 2013-2014 Buick Encore
- 2013 Chevrolet Malibu
- 2013 Buick Regal
- 2013 Cadillac SRX
- 2014-2015 Chevrolet Spark (gasoline models)
- 2013-2014 Chevrolet Orlando
- 2013-2014 Chevrolet Trax
- 2013 Chevrolet Volt
Important Post-Installation Information
While our goal is a 100% plug-and-play experience, some vehicle systems may require a simple recalibration after the BCM is reconnected. Please be aware of the following possibilities:
- Airbag System Sync: If the airbag warning light is illuminated after installation, a ‘Setup SDM Primary Key in BCM’ procedure is needed. This is a quick process that can be performed with a professional-grade scan tool to sync the airbag module with the new BCM.
- Brake Pedal Position Relearn: On some models, a brake pedal position sensor recalibration might be necessary to ensure correct brake light operation and traction control system function.
Always consult a factory service manual or a qualified technician if you are unsure about any post-installation steps.
Frequently Asked Questions
What is this programming service and why do I need it?
This is a service where we transfer the critical VIN, key, and security data from your original BCM to a replacement unit. This is necessary because a BCM from another vehicle will not work in yours without this specific data, preventing your car from starting.
How long does the entire process take?
Once we receive your original module, our programming service is typically completed within 1-2 business days. The total time will depend on shipping times to and from our facility. We will provide you with tracking information as soon as your programmed module is on its way back to you.
What if my original BCM is completely dead or damaged?
In many cases, even if the BCM is non-functional in the vehicle, we can still extract the necessary data from the memory chip. If your module has severe water or fire damage, please contact us before ordering to discuss options.
Is this a true plug-and-play installation?
Yes, in over 95% of cases, the installation is completely plug-and-play. You simply install the module we send you, and your vehicle will start and run correctly. In rare cases, as noted above, a simple relearn procedure for the airbag or brake pedal sensor may be required.
Do I need to send my keys or any other parts?
No, we only need your original Body Control Module. All the necessary key and immobilizer data is stored within the BCM itself, so there is no need to send keys, fobs, or other modules.