Programmed 2010-2011 SAAB 9-5 ECM Engine Computer 12650256

Restore Your SAAB 9-5’s Performance

Fix check engine lights, stalling, and no-start issues with this pre-programmed Engine Control Module for your 2010-2011 SAAB 9-5. We flash it with your car’s VIN and the latest GM software, so it’s ready for a simple, plug-and-play installation. No dealer visit required! Fix your SAAB today!

$187.99

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-01910-66 Categories: ,
Guaranteed Safe Checkout

Is Your SAAB 9-5 Experiencing Frustrating Engine Problems?

If you’re dealing with a check engine light that won’t go away, intermittent stalling, no-start conditions, or a host of confusing error codes, a failing Engine Control Module (ECM) is often the culprit. As the brain of your vehicle, a faulty ECM can wreak havoc on your 2010-2011 SAAB 9-5’s performance, fuel economy, and reliability. Don’t let a bad computer keep your sophisticated SAAB parked.

This is a fully tested, reliable replacement Engine Control Module, part number 12650256. The best part? We handle the complex programming for you. Simply provide your vehicle’s VIN during checkout, and our technicians will flash the module with the latest GM-certified software specific to your car. It arrives at your door ready for a straightforward installation, saving you hundreds of dollars and the hassle of a dealership visit.

From the Shop Floor: A Real-World Diagnosis

“A customer’s 2011 SAAB 9-5 2.0L came into my shop last month with a classic case of ECM failure. The car would randomly stall at red lights and sometimes refuse to restart for 10-15 minutes. The dash was lit up with multiple, unrelated warning lights, and the scan tool showed a U0100 ‘Lost Communication with ECM’ code. Before jumping to conclusions, we checked the basics: battery voltage was strong, and we verified solid power and ground signals at the ECM connector. With the fundamentals confirmed, it was clear the internal circuitry of the original module was failing. We installed one of our pre-programmed ECMs, performed the simple 10-minute key relearn procedure, and the car fired up instantly. All ghost codes were gone, and the stalling issue was completely resolved. It’s a textbook repair I’ve seen dozens of times on these GM platforms.”

The Easiest Way to Restore Your Engine’s Health

Replacing an ECM used to be a job reserved for the dealer, involving expensive programming tools and labor. We’ve eliminated that barrier. This module is the definitive solution for DIYers and professional mechanics alike who need a reliable, plug-and-play fix.

  • โœ” VIN-Programmed for Your SAAB: We load your car’s specific VIN and software, ensuring perfect communication with all other vehicle systems.
  • โœ” Latest GM Software Updates: Your module comes with the newest factory software, which often corrects drivability issues and improves efficiency from the original programming.
  • โœ” Solves Common Failure Symptoms: An effective fix for issues like random misfires, harsh shifting, no-start conditions, and persistent check engine lights.
  • โœ” Direct-Fit Replacement: Guaranteed to physically fit and electronically function just like the original, with no modifications required.

Plug-and-Play Installation: No Dealer Visit Required

You can get your SAAB back to peak condition right in your own driveway. Follow these simple steps for installation:

  1. Safety First: Disconnect the negative terminal from your car’s battery and wait 10 minutes for the systems to discharge.
  2. Locate the ECM: On the 2010-2011 SAAB 9-5, the Engine Control Module is typically located in the left-hand (driver’s side) of the engine compartment.
  3. Disconnect and Remove: Carefully unclip the wiring harness connectors. Be gentle with the locking tabs. Then, unbolt the module from its mounting bracket and remove it from the vehicle.
  4. Install the New Module: Bolt the new, pre-programmed ECM into place. Securely reconnect the wiring harnesses, ensuring they click into place.
  5. Reconnect Battery: Re-attach the negative battery terminal.
  6. Perform Security Relearn: Most vehicles using this ECM will require a simple key relearn. Turn the key to the ‘ON’ position for 10 minutes, then ‘OFF’ for 10 seconds. Repeat this cycle two more times (for a total of 30 minutes). The vehicle should then start and run normally.

Guaranteed Compatibility

This ECM is a direct replacement for a wide range of GM vehicles and will function correctly if your original module has any of the following part numbers:

Interchangeable Part Numbers: 12616889, 12630908, 12637106, 12642665, 12650256, 12651993

While this listing is focused on the 2010-2011 SAAB 9-5 ECM, it also fits many other models including the Cadillac CTS, Chevy Camaro, Buick LaCrosse, GMC Terrain, and more. Please use the fitment chart to confirm compatibility with your specific vehicle.

Condition

Refurbished

Genuine OEM

Yes

MPN

12650256

Interchange part number

PartNumber

590

Model

saab-9-5

Year

2012

Brand

GM

Manufacturer Part Number

, , , , ,

Scroll to Top