2016 Suburban 3500 Engine Control Module 12663405 Programmed to Your VIN

Restore Your Vehicle’s Performance!

Fix check engine lights, no-start issues, and erratic behavior with this pre-programmed Engine Control Module. It arrives flashed to your specific VIN with the latest GM software, making it a direct-fit, plug-and-play solution for your 2016 Suburban 3500 and many other GM models. No dealer visit required! Order today and get back on the road fast!

$225.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-02768-40 Categories: ,
Guaranteed Safe Checkout

Is Your GM Vehicle Plagued by Frustrating Electrical Gremlins?

If your truck, van, or car is suffering from a persistent check engine light, erratic engine behavior, no-start conditions, or communication error codes, the root cause is often a failing Engine Control Module (ECM). As a mechanic with over two decades of diagnostic experience, I’ve seen firsthand how a faulty ECM can send owners down a rabbit hole of expensive, unnecessary repairs. It’s the central computer for your engine, and when it fails, it can mimic dozens of other problems, from bad sensors to transmission issues.

The Smart Solution: A VIN-Programmed ECM Ready for Installation

Forget about costly dealership visits, towing fees, and waiting days for programming. This Engine Control Module is the direct, hassle-free solution. We take a genuine GM module and flash it with the very latest, most stable software release from General Motors, programmed specifically to your vehicle’s unique VIN. When it arrives at your door, it’s ready to be installed, allowing you to get your vehicle back to factory-spec operation quickly and affordably. This isn’t just a replacement part; it’s a restoration of your vehicle’s core logic.

From the Shop Floor: A Real-World Diagnosis

“A customer’s 2016 Silverado 2500 with the 6.0Lโ€”which uses this exact same ECMโ€”came in last week on a tow truck. It would crank but not start, and the owner had already replaced the fuel pump and crank sensor. The scanner couldn’t communicate with the ECM. After confirming power and ground at the module, we knew the computer itself was the issue. A new, VIN-programmed module like this one had him back on the road the same afternoon, saving him hundreds in diagnostic time and the cost of a dealer-only part.”

Why Choose Our Pre-Programmed ECM?

  • โœ” VIN-Specific Programming: We load the latest GM software calibrated precisely for your vehicle’s options and systems. Just provide your VIN at checkout.
  • โœ” Eliminates Common Failures: Solves issues like false trouble codes (DTCs), harsh shifting, poor fuel economy, and intermittent stalling.
  • โœ” True Plug-and-Play: No additional programming or dealer intervention is required. In most cases, an anti-theft relearn procedure is all that’s needed (a simple process you can do yourself).
  • โœ” Broad GM Compatibility: This single module is a direct replacement for a wide range of popular GM cars, trucks, and vans, ensuring a perfect fit.
  • โœ” Cost-Effective Repair: Save significantly compared to the cost of a new module and programming services at a dealership.

Easy Installation Guide for Your 2016 Suburban 3500 Engine Control Module

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery to prevent any electrical shorts.
  2. Locate the ECM: On most GM trucks and vans like the Suburban 3500, the ECM is located in the front of the engine compartment on the driver’s side, near the battery or air filter box.
  3. Disconnect Connectors: Carefully unclip the wiring harness connectors from the old module. Inspect them for any signs of corrosion or damage.
  4. Remove the Old Module: Unbolt the old ECM from its mounting bracket.
  5. Install the New Module: Bolt your new, pre-programmed ECM into place.
  6. Reconnect Everything: Securely plug the wiring harnesses into the new module until they click. Reconnect the negative battery terminal.
  7. Perform Relearn (If Needed): Start the vehicle. In many cases, it will start and run perfectly. Some vehicles may require a simple security relearn procedure, which typically involves turning the key on and off in a specific sequence.

Guaranteed Fitment for Multiple GM Models

This module is a direct replacement for several original part numbers, including: 12668866, 12668994, 12643636, 12663405, 12670335, 22819494, and 12692200. It is confirmed to fit the following vehicles (please verify your specific options):

  • Buick Encore (2013-2016)
  • Cadillac ELR (2014-2016)
  • Chevrolet Cruze / Cruze Limited (2012-2016)
  • Chevrolet Express 2500/3500 Van (2016)
  • Chevrolet Silverado 2500/3500 Pickup (2012-2016)
  • Chevrolet Sonic (2012-2016)
  • Chevrolet Spark (2014-2015)
  • Chevrolet Trax (2013-2016)
  • Chevrolet Volt (2011-2015)
  • GMC Savana 2500/3500 Van (2016)
  • GMC Sierra 2500/3500 & Denali Pickup (2012-2016)
  • Chevrolet Suburban 3500 (2016)
Condition

Refurbished

Genuine OEM

Yes

MPN

12663405

Interchange part number

PartNumber

590

Model

SUBURBAN 3500

Year

2012

Brand

GM

Manufacturer Part Number

, , , , , ,

Scroll to Top