1998 Venture Powertrain Control Module 9357034 Programmed to Your VIN

Restore Your Venture’s Performance

Fix frustrating engine issues with this Powertrain Control Module for your 1998 Chevy Venture. It arrives pre-programmed to your vehicle’s VIN with the latest GM software, eliminating the need for a dealer visit. Solves common problems like rough idle, poor shifting, and no-start conditions. Get back on the road fast. Order yours today!

$64.95

+11.99 USPS Priority Shipping

Availability: In stock



SKU: 590-05069-90 Categories: ,
Guaranteed Safe Checkout

Is Your 1998 Venture Experiencing Engine or Transmission Problems?

If your Chevrolet Venture is suffering from a persistent Check Engine Light, erratic shifting, a no-start condition, or poor fuel economy, a failing Powertrain Control Module (PCM) is often the culprit. As the central computer for your vehicle, the PCM manages everything from fuel injection and spark timing to transmission shift points. When it fails, it can cause a cascade of frustrating and hard-to-diagnose issues. Don’t let a faulty computer keep your reliable minivan off the road.

The Direct-Fit Solution: A 1998 Venture Powertrain Control Module Programmed for You

This isn’t just a replacement part; it’s a complete, ready-to-install solution. We take the guesswork and high dealership costs out of the equation. When you order, you provide us with your vehicle’s VIN, and we program this PCM with the latest, most stable software updates directly from GM. This ensures that the module is perfectly matched to your Venture’s specific configuration, restoring its original performance and efficiency.

From the Shop Floor: A Real-World Diagnostic Story

“Just last month, a 1998 Oldsmobile Silhouette—which uses this exact same PCM as the Venture—was towed into my shop. The owner had already replaced the fuel pump and the ignition control module trying to fix an intermittent no-start and stalling issue. The codes were all over the place. After confirming fuel pressure and spark were good when it *did* run, I focused on the PCM. By monitoring the 5-volt reference signal from the PCM to the sensors, I saw it was dropping out intermittently. That’s a classic sign of internal PCM failure on these GM platforms. A new, properly programmed module fixed it instantly. The customer had spent hundreds chasing parts when the vehicle’s brain was the root cause all along.”

Key Features & Benefits:

  • ✔ VIN-Specific Programming: We flash the module with your vehicle’s VIN and the newest GM software for flawless communication and performance.
  • ✔ Resolves Common Issues: Effectively corrects problems like false sensor codes, harsh shifting, engine stumbling, and no-start conditions related to the PCM.
  • ✔ No Dealer Required: This module is sent to you ready for installation, saving you a costly trip to the dealership for programming.
  • ✔ Broad Compatibility: This unit directly replaces multiple service numbers, ensuring a perfect match for a wide range of GM vehicles.

Simple Plug-and-Play Installation Guide

Installing your new PCM is a straightforward process that you can do at home with basic tools. While specific steps may vary slightly by model, here is a general guide for the 1998 Venture.

  1. Safety First: Disconnect the negative terminal from your vehicle’s battery and secure it away from the post to prevent any accidental reconnection.
  2. Locate the PCM: On the 1998 Venture, the PCM is typically located inside the air filter housing in the engine compartment. You will need to remove the air filter cover to access it.
  3. Disconnect Connectors: Carefully unclip and disconnect the electrical wiring harnesses from the old PCM. Inspect the connectors for any corrosion or bent pins. Clean them with electrical contact cleaner if necessary.
  4. Remove the Old Module: Unbolt the PCM from its mounting bracket and remove it from the vehicle.
  5. Install the New Module: Seat your new, pre-programmed PCM into the mounting bracket and secure it. Reconnect the wiring harnesses, ensuring they click firmly into place.
  6. Reconnect Battery: Reinstall the air filter assembly and then reconnect the negative battery terminal. Your vehicle is now ready to start.

Guaranteed Compatibility

This module is a direct replacement for units with the following service numbers. Please verify one of these numbers is on your original part to ensure compatibility.

Compatible Service Numbers: 09356741, 16236757, 9356741, 9357034, 9357440, 9366314

This part is also the correct Electronic Control Module for a wide variety of 1998 and 1999 GM vehicles, including the Grand Am, LeSabre, Park Avenue, Cutlass, Century, Grand Prix, and more. Please refer to the detailed fitment list to confirm for your specific model.

Condition

Refurbished

Genuine OEM

Yes

MPN

9357034

Interchange part number

PartNumber

590

Model

VENTURE

Year

1999

Brand

GM

Manufacturer Part Number

, , , , , ,

superseded part number

09356741 16236757 16236757 9356741 9357034 9357440, 9366314

Scroll to Top